X-Git-Url: https://vcs.maemo.org/git/?a=blobdiff_plain;f=hw%2Fpiix_pci.c;h=3c04e3a08f95f164646254b93e53849ee4f599f0;hb=cd346349b45ef056f138a184f660b8c34c3213cc;hp=672b736ad0a2de915c232b9b1f8add9ae0e1c1b2;hpb=1941d19c657a8084603e88d7860786baa40c0e80;p=qemu

diff --git a/hw/piix_pci.c b/hw/piix_pci.c
index 672b736..3c04e3a 100644
--- a/hw/piix_pci.c
+++ b/hw/piix_pci.c
@@ -2,7 +2,7 @@
  * QEMU i440FX/PIIX3 PCI Bridge Emulation
  *
  * Copyright (c) 2006 Fabrice Bellard
- * 
+ *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
  * in the Software without restriction, including without limitation the rights
@@ -40,16 +40,129 @@ static uint32_t i440fx_addr_readl(void* opaque, uint32_t addr)
     return s->config_reg;
 }
 
-static void piix3_set_irq(PCIDevice *pci_dev, void *pic, int irq_num, int level);
+static void piix3_set_irq(qemu_irq *pic, int irq_num, int level);
+
+/* return the global irq number corresponding to a given device irq
+   pin. We could also use the bus number to have a more precise
+   mapping. */
+static int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
+{
+    int slot_addend;
+    slot_addend = (pci_dev->devfn >> 3) - 1;
+    return (irq_num + slot_addend) & 3;
+}
+
+static uint32_t isa_page_descs[384 / 4];
+static uint8_t smm_enabled;
 
-PCIBus *i440fx_init(void)
+static void update_pam(PCIDevice *d, uint32_t start, uint32_t end, int r)
+{
+    uint32_t addr;
+
+    //    printf("ISA mapping %08x-0x%08x: %d\n", start, end, r);
+    switch(r) {
+    case 3:
+        /* RAM */
+        cpu_register_physical_memory(start, end - start,
+                                     start);
+        break;
+    case 1:
+        /* ROM (XXX: not quite correct) */
+        cpu_register_physical_memory(start, end - start,
+                                     start | IO_MEM_ROM);
+        break;
+    case 2:
+    case 0:
+        /* XXX: should distinguish read/write cases */
+        for(addr = start; addr < end; addr += 4096) {
+            cpu_register_physical_memory(addr, 4096,
+                                         isa_page_descs[(addr - 0xa0000) >> 12]);
+        }
+        break;
+    }
+}
+
+static void i440fx_update_memory_mappings(PCIDevice *d)
+{
+    int i, r;
+    uint32_t smram, addr;
+
+    update_pam(d, 0xf0000, 0x100000, (d->config[0x59] >> 4) & 3);
+    for(i = 0; i < 12; i++) {
+        r = (d->config[(i >> 1) + 0x5a] >> ((i & 1) * 4)) & 3;
+        update_pam(d, 0xc0000 + 0x4000 * i, 0xc0000 + 0x4000 * (i + 1), r);
+    }
+    smram = d->config[0x72];
+    if ((smm_enabled && (smram & 0x08)) || (smram & 0x40)) {
+        cpu_register_physical_memory(0xa0000, 0x20000, 0xa0000);
+    } else {
+        for(addr = 0xa0000; addr < 0xc0000; addr += 4096) {
+            cpu_register_physical_memory(addr, 4096,
+                                         isa_page_descs[(addr - 0xa0000) >> 12]);
+        }
+    }
+}
+
+void i440fx_set_smm(PCIDevice *d, int val)
+{
+    val = (val != 0);
+    if (smm_enabled != val) {
+        smm_enabled = val;
+        i440fx_update_memory_mappings(d);
+    }
+}
+
+
+/* XXX: suppress when better memory API. We make the assumption that
+   no device (in particular the VGA) changes the memory mappings in
+   the 0xa0000-0x100000 range */
+void i440fx_init_memory_mappings(PCIDevice *d)
+{
+    int i;
+    for(i = 0; i < 96; i++) {
+        isa_page_descs[i] = cpu_get_physical_page_desc(0xa0000 + i * 0x1000);
+    }
+}
+
+static void i440fx_write_config(PCIDevice *d,
+                                uint32_t address, uint32_t val, int len)
+{
+    /* XXX: implement SMRAM.D_LOCK */
+    pci_default_write_config(d, address, val, len);
+    if ((address >= 0x59 && address <= 0x5f) || address == 0x72)
+        i440fx_update_memory_mappings(d);
+}
+
+static void i440fx_save(QEMUFile* f, void *opaque)
+{
+    PCIDevice *d = opaque;
+    pci_device_save(d, f);
+    qemu_put_8s(f, &smm_enabled);
+}
+
+static int i440fx_load(QEMUFile* f, void *opaque, int version_id)
+{
+    PCIDevice *d = opaque;
+    int ret;
+
+    if (version_id != 1)
+        return -EINVAL;
+    ret = pci_device_load(d, f);
+    if (ret < 0)
+        return ret;
+    i440fx_update_memory_mappings(d);
+    qemu_get_8s(f, &smm_enabled);
+    return 0;
+}
+
+PCIBus *i440fx_init(PCIDevice **pi440fx_state, qemu_irq *pic)
 {
     PCIBus *b;
     PCIDevice *d;
     I440FXState *s;
 
     s = qemu_mallocz(sizeof(I440FXState));
-    b = pci_register_bus(piix3_set_irq, NULL, 0);
+    b = pci_register_bus(piix3_set_irq, pci_slot_get_pirq, pic, 0, 4);
     s->bus = b;
 
     register_ioport_write(0xcf8, 4, 4, i440fx_addr_writel, s);
@@ -62,8 +175,8 @@ PCIBus *i440fx_init(void)
     register_ioport_read(0xcfc, 4, 2, pci_host_data_readw, s);
     register_ioport_read(0xcfc, 4, 4, pci_host_data_readl, s);
 
-    d = pci_register_device(b, "i440FX", sizeof(PCIDevice), 0, 
-                            NULL, NULL);
+    d = pci_register_device(b, "i440FX", sizeof(PCIDevice), 0,
+                            NULL, i440fx_write_config);
 
     d->config[0x00] = 0x86; // vendor_id
     d->config[0x01] = 0x80;
@@ -73,76 +186,43 @@ PCIBus *i440fx_init(void)
     d->config[0x0a] = 0x00; // class_sub = host2pci
     d->config[0x0b] = 0x06; // class_base = PCI_bridge
     d->config[0x0e] = 0x00; // header_type
+
+    d->config[0x72] = 0x02; /* SMRAM */
+
+    register_savevm("I440FX", 0, 1, i440fx_save, i440fx_load, d);
+    *pi440fx_state = d;
     return b;
 }
 
 /* PIIX3 PCI to ISA bridge */
 
-static PCIDevice *piix3_dev;
+PCIDevice *piix3_dev;
+PCIDevice *piix4_dev;
 
 /* just used for simpler irq handling. */
 #define PCI_IRQ_WORDS   ((PCI_DEVICES_MAX + 31) / 32)
 
-static uint32_t pci_irq_levels[4][PCI_IRQ_WORDS];
-
-/* return the global irq number corresponding to a given device irq
-   pin. We could also use the bus number to have a more precise
-   mapping. */
-static inline int pci_slot_get_pirq(PCIDevice *pci_dev, int irq_num)
-{
-    int slot_addend;
-    slot_addend = (pci_dev->devfn >> 3) - 1;
-    return (irq_num + slot_addend) & 3;
-}
-
-static inline int get_pci_irq_level(int irq_num)
-{
-    int pic_level;
-#if (PCI_IRQ_WORDS == 2)
-    pic_level = ((pci_irq_levels[irq_num][0] | 
-                  pci_irq_levels[irq_num][1]) != 0);
-#else
-    {
-        int i;
-        pic_level = 0;
-        for(i = 0; i < PCI_IRQ_WORDS; i++) {
-            if (pci_irq_levels[irq_num][i]) {
-                pic_level = 1;
-                break;
-            }
-        }
-    }
-#endif
-    return pic_level;
-}
+static int pci_irq_levels[4];
 
-static void piix3_set_irq(PCIDevice *pci_dev, void *pic, int irq_num, int level)
+static void piix3_set_irq(qemu_irq *pic, int irq_num, int level)
 {
-    int irq_index, shift, pic_irq, pic_level;
-    uint32_t *p;
+    int i, pic_irq, pic_level;
 
-    irq_num = pci_slot_get_pirq(pci_dev, irq_num);
-    irq_index = pci_dev->irq_index;
-    p = &pci_irq_levels[irq_num][irq_index >> 5];
-    shift = (irq_index & 0x1f);
-    *p = (*p & ~(1 << shift)) | (level << shift);
+    piix3_dev->config[0x60 + irq_num] &= ~0x80;   // enable bit
+    pci_irq_levels[irq_num] = level;
 
     /* now we change the pic irq level according to the piix irq mappings */
     /* XXX: optimize */
     pic_irq = piix3_dev->config[0x60 + irq_num];
     if (pic_irq < 16) {
-        /* the pic level is the logical OR of all the PCI irqs mapped
+        /* The pic level is the logical OR of all the PCI irqs mapped
            to it */
         pic_level = 0;
-        if (pic_irq == piix3_dev->config[0x60])
-            pic_level |= get_pci_irq_level(0);
-        if (pic_irq == piix3_dev->config[0x61])
-            pic_level |= get_pci_irq_level(1);
-        if (pic_irq == piix3_dev->config[0x62])
-            pic_level |= get_pci_irq_level(2);
-        if (pic_irq == piix3_dev->config[0x63])
-            pic_level |= get_pci_irq_level(3);
-        pic_set_irq(pic_irq, pic_level);
+        for (i = 0; i < 4; i++) {
+            if (pic_irq == piix3_dev->config[0x60 + i])
+                pic_level |= pci_irq_levels[i];
+        }
+        qemu_set_irq(pic[pic_irq], pic_level);
     }
 }
 
@@ -167,6 +247,42 @@ static void piix3_reset(PCIDevice *d)
     pci_conf[0x80] = 0x00;
     pci_conf[0x82] = 0x00;
     pci_conf[0xa0] = 0x08;
+    pci_conf[0xa2] = 0x00;
+    pci_conf[0xa3] = 0x00;
+    pci_conf[0xa4] = 0x00;
+    pci_conf[0xa5] = 0x00;
+    pci_conf[0xa6] = 0x00;
+    pci_conf[0xa7] = 0x00;
+    pci_conf[0xa8] = 0x0f;
+    pci_conf[0xaa] = 0x00;
+    pci_conf[0xab] = 0x00;
+    pci_conf[0xac] = 0x00;
+    pci_conf[0xae] = 0x00;
+}
+
+static void piix4_reset(PCIDevice *d)
+{
+    uint8_t *pci_conf = d->config;
+
+    pci_conf[0x04] = 0x07; // master, memory and I/O
+    pci_conf[0x05] = 0x00;
+    pci_conf[0x06] = 0x00;
+    pci_conf[0x07] = 0x02; // PCI_status_devsel_medium
+    pci_conf[0x4c] = 0x4d;
+    pci_conf[0x4e] = 0x03;
+    pci_conf[0x4f] = 0x00;
+    pci_conf[0x60] = 0x0a; // PCI A -> IRQ 10
+    pci_conf[0x61] = 0x0a; // PCI B -> IRQ 10
+    pci_conf[0x62] = 0x0b; // PCI C -> IRQ 11
+    pci_conf[0x63] = 0x0b; // PCI D -> IRQ 11
+    pci_conf[0x69] = 0x02;
+    pci_conf[0x70] = 0x80;
+    pci_conf[0x76] = 0x0c;
+    pci_conf[0x77] = 0x0c;
+    pci_conf[0x78] = 0x02;
+    pci_conf[0x79] = 0x00;
+    pci_conf[0x80] = 0x00;
+    pci_conf[0x82] = 0x00;
     pci_conf[0xa0] = 0x08;
     pci_conf[0xa2] = 0x00;
     pci_conf[0xa3] = 0x00;
@@ -195,22 +311,23 @@ static int piix_load(QEMUFile* f, void *opaque, int version_id)
     return pci_device_load(d, f);
 }
 
-int piix3_init(PCIBus *bus)
+int piix_init(PCIBus *bus, int devfn)
 {
     PCIDevice *d;
     uint8_t *pci_conf;
 
-    d = pci_register_device(bus, "PIIX3", sizeof(PCIDevice),
-                                    -1, NULL, NULL);
-    register_savevm("PIIX3", 0, 2, piix_save, piix_load, d);
+    d = pci_register_device(bus, "PIIX", sizeof(PCIDevice),
+                                    devfn, NULL, NULL);
+    register_savevm("PIIX", 0, 2, piix_save, piix_load, d);
 
     piix3_dev = d;
     pci_conf = d->config;
 
     pci_conf[0x00] = 0x86; // Intel
     pci_conf[0x01] = 0x80;
-    pci_conf[0x02] = 0x00; // 82371SB PIIX3 PCI-to-ISA bridge (Step A1)
-    pci_conf[0x03] = 0x70;
+    pci_conf[0x02] = 0x2E; // 82371FB PIIX PCI-to-ISA bridge
+    pci_conf[0x03] = 0x12;
+    pci_conf[0x08] = 0x02; // Step A1
     pci_conf[0x0a] = 0x01; // class_sub = PCI_ISA
     pci_conf[0x0b] = 0x06; // class_base = PCI_bridge
     pci_conf[0x0e] = 0x80; // header_type = PCI_multifunction, generic
@@ -219,215 +336,50 @@ int piix3_init(PCIBus *bus)
     return d->devfn;
 }
 
-/***********************************************************/
-/* XXX: the following should be moved to the PC BIOS */
-
-static __attribute__((unused)) uint32_t isa_inb(uint32_t addr)
-{
-    return cpu_inb(NULL, addr);
-}
-
-static void isa_outb(uint32_t val, uint32_t addr)
-{
-    cpu_outb(NULL, addr, val);
-}
-
-static __attribute__((unused)) uint32_t isa_inw(uint32_t addr)
-{
-    return cpu_inw(NULL, addr);
-}
-
-static __attribute__((unused)) void isa_outw(uint32_t val, uint32_t addr)
+int piix3_init(PCIBus *bus, int devfn)
 {
-    cpu_outw(NULL, addr, val);
-}
-
-static __attribute__((unused)) uint32_t isa_inl(uint32_t addr)
-{
-    return cpu_inl(NULL, addr);
-}
-
-static __attribute__((unused)) void isa_outl(uint32_t val, uint32_t addr)
-{
-    cpu_outl(NULL, addr, val);
-}
-
-static uint32_t pci_bios_io_addr;
-static uint32_t pci_bios_mem_addr;
-/* host irqs corresponding to PCI irqs A-D */
-static uint8_t pci_irqs[4] = { 11, 9, 11, 9 };
-
-static void pci_config_writel(PCIDevice *d, uint32_t addr, uint32_t val)
-{
-    PCIBus *s = d->bus;
-    addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
-    pci_data_write(s, addr, val, 4);
-}
-
-static void pci_config_writew(PCIDevice *d, uint32_t addr, uint32_t val)
-{
-    PCIBus *s = d->bus;
-    addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
-    pci_data_write(s, addr, val, 2);
-}
+    PCIDevice *d;
+    uint8_t *pci_conf;
 
-static void pci_config_writeb(PCIDevice *d, uint32_t addr, uint32_t val)
-{
-    PCIBus *s = d->bus;
-    addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
-    pci_data_write(s, addr, val, 1);
-}
+    d = pci_register_device(bus, "PIIX3", sizeof(PCIDevice),
+                                    devfn, NULL, NULL);
+    register_savevm("PIIX3", 0, 2, piix_save, piix_load, d);
 
-static __attribute__((unused)) uint32_t pci_config_readl(PCIDevice *d, uint32_t addr)
-{
-    PCIBus *s = d->bus;
-    addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
-    return pci_data_read(s, addr, 4);
-}
+    piix3_dev = d;
+    pci_conf = d->config;
 
-static uint32_t pci_config_readw(PCIDevice *d, uint32_t addr)
-{
-    PCIBus *s = d->bus;
-    addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
-    return pci_data_read(s, addr, 2);
-}
+    pci_conf[0x00] = 0x86; // Intel
+    pci_conf[0x01] = 0x80;
+    pci_conf[0x02] = 0x00; // 82371SB PIIX3 PCI-to-ISA bridge (Step A1)
+    pci_conf[0x03] = 0x70;
+    pci_conf[0x0a] = 0x01; // class_sub = PCI_ISA
+    pci_conf[0x0b] = 0x06; // class_base = PCI_bridge
+    pci_conf[0x0e] = 0x80; // header_type = PCI_multifunction, generic
 
-static uint32_t pci_config_readb(PCIDevice *d, uint32_t addr)
-{
-    PCIBus *s = d->bus;
-    addr |= (pci_bus_num(s) << 16) | (d->devfn << 8);
-    return pci_data_read(s, addr, 1);
+    piix3_reset(d);
+    return d->devfn;
 }
 
-static void pci_set_io_region_addr(PCIDevice *d, int region_num, uint32_t addr)
+int piix4_init(PCIBus *bus, int devfn)
 {
-    PCIIORegion *r;
-    uint16_t cmd;
-    uint32_t ofs;
-
-    if ( region_num == PCI_ROM_SLOT ) {
-        ofs = 0x30;
-    }else{
-        ofs = 0x10 + region_num * 4;
-    }
-
-    pci_config_writel(d, ofs, addr);
-    r = &d->io_regions[region_num];
-
-    /* enable memory mappings */
-    cmd = pci_config_readw(d, PCI_COMMAND);
-    if ( region_num == PCI_ROM_SLOT )
-        cmd |= 2;
-    else if (r->type & PCI_ADDRESS_SPACE_IO)
-        cmd |= 1;
-    else
-        cmd |= 2;
-    pci_config_writew(d, PCI_COMMAND, cmd);
-}
+    PCIDevice *d;
+    uint8_t *pci_conf;
 
-static void pci_bios_init_device(PCIDevice *d)
-{
-    int class;
-    PCIIORegion *r;
-    uint32_t *paddr;
-    int i, pin, pic_irq, vendor_id, device_id;
-
-    class = pci_config_readw(d, PCI_CLASS_DEVICE);
-    vendor_id = pci_config_readw(d, PCI_VENDOR_ID);
-    device_id = pci_config_readw(d, PCI_DEVICE_ID);
-    switch(class) {
-    case 0x0101:
-        if (vendor_id == 0x8086 && device_id == 0x7010) {
-            /* PIIX3 IDE */
-            pci_config_writew(d, 0x40, 0x8000); // enable IDE0
-            pci_config_writew(d, 0x42, 0x8000); // enable IDE1
-            goto default_map;
-        } else {
-            /* IDE: we map it as in ISA mode */
-            pci_set_io_region_addr(d, 0, 0x1f0);
-            pci_set_io_region_addr(d, 1, 0x3f4);
-            pci_set_io_region_addr(d, 2, 0x170);
-            pci_set_io_region_addr(d, 3, 0x374);
-        }
-        break;
-    case 0x0300:
-        if (vendor_id != 0x1234)
-            goto default_map;
-        /* VGA: map frame buffer to default Bochs VBE address */
-        pci_set_io_region_addr(d, 0, 0xE0000000);
-        break;
-    case 0x0800:
-        /* PIC */
-        vendor_id = pci_config_readw(d, PCI_VENDOR_ID);
-        device_id = pci_config_readw(d, PCI_DEVICE_ID);
-        if (vendor_id == 0x1014) {
-            /* IBM */
-            if (device_id == 0x0046 || device_id == 0xFFFF) {
-                /* MPIC & MPIC2 */
-                pci_set_io_region_addr(d, 0, 0x80800000 + 0x00040000);
-            }
-        }
-        break;
-    case 0xff00:
-        if (vendor_id == 0x0106b &&
-            (device_id == 0x0017 || device_id == 0x0022)) {
-            /* macio bridge */
-            pci_set_io_region_addr(d, 0, 0x80800000);
-        }
-        break;
-    default:
-    default_map:
-        /* default memory mappings */
-        for(i = 0; i < PCI_NUM_REGIONS; i++) {
-            r = &d->io_regions[i];
-            if (r->size) {
-                if (r->type & PCI_ADDRESS_SPACE_IO)
-                    paddr = &pci_bios_io_addr;
-                else
-                    paddr = &pci_bios_mem_addr;
-                *paddr = (*paddr + r->size - 1) & ~(r->size - 1);
-                pci_set_io_region_addr(d, i, *paddr);
-                *paddr += r->size;
-            }
-        }
-        break;
-    }
+    d = pci_register_device(bus, "PIIX4", sizeof(PCIDevice),
+                                    devfn, NULL, NULL);
+    register_savevm("PIIX4", 0, 2, piix_save, piix_load, d);
 
-    /* map the interrupt */
-    pin = pci_config_readb(d, PCI_INTERRUPT_PIN);
-    if (pin != 0) {
-        pin = pci_slot_get_pirq(d, pin - 1);
-        pic_irq = pci_irqs[pin];
-        pci_config_writeb(d, PCI_INTERRUPT_LINE, pic_irq);
-    }
-}
+    piix4_dev = d;
+    pci_conf = d->config;
 
-/*
- * This function initializes the PCI devices as a normal PCI BIOS
- * would do. It is provided just in case the BIOS has no support for
- * PCI.
- */
-void pci_bios_init(void)
-{
-    int i, irq;
-    uint8_t elcr[2];
-
-    pci_bios_io_addr = 0xc000;
-    pci_bios_mem_addr = 0xf0000000;
-
-    /* activate IRQ mappings */
-    elcr[0] = 0x00;
-    elcr[1] = 0x00;
-    for(i = 0; i < 4; i++) {
-        irq = pci_irqs[i];
-        /* set to trigger level */
-        elcr[irq >> 3] |= (1 << (irq & 7));
-        /* activate irq remapping in PIIX */
-        pci_config_writeb(piix3_dev, 0x60 + i, irq);
-    }
-    isa_outb(elcr[0], 0x4d0);
-    isa_outb(elcr[1], 0x4d1);
+    pci_conf[0x00] = 0x86; // Intel
+    pci_conf[0x01] = 0x80;
+    pci_conf[0x02] = 0x10; // 82371AB/EB/MB PIIX4 PCI-to-ISA bridge
+    pci_conf[0x03] = 0x71;
+    pci_conf[0x0a] = 0x01; // class_sub = PCI_ISA
+    pci_conf[0x0b] = 0x06; // class_base = PCI_bridge
+    pci_conf[0x0e] = 0x80; // header_type = PCI_multifunction, generic
 
-    pci_for_each_device(pci_bios_init_device);
+    piix4_reset(d);
+    return d->devfn;
 }
-