*
* Copyright (c) 2004, Hannu Saransaari and Lauri Hakkarainen
* Copyright (c) 2007 Toni Spets
- * Copyright (c) 2005-2009 Brenden Matthews, Philip Kovacs, et. al.
+ * Copyright (c) 2005-2010 Brenden Matthews, Philip Kovacs, et. al.
* (see AUTHORS)
* All rights reserved.
*
#endif
#include <linux/route.h>
#include <math.h>
+#include <pthread.h>
/* The following ifdefs were adapted from gkrellm */
#include <linux/major.h>
{
}
-void update_uptime(void)
+int update_uptime(void)
{
#ifdef HAVE_SYSINFO
if (!prefer_proc) {
if (!(fp = open_file("/proc/uptime", &rep))) {
info.uptime = 0.0;
- return;
+ return 0;
}
fscanf(fp, "%lf", &info.uptime);
fclose(fp);
}
+ return 0;
}
int check_mount(char *s)
/* these things are also in sysinfo except Buffers:
* (that's why I'm reading them from proc) */
-void update_meminfo(void)
+int update_meminfo(void)
{
FILE *meminfo_fp;
static int rep = 0;
info.buffers = info.cached = info.memfree = info.memeasyfree = 0;
if (!(meminfo_fp = open_file("/proc/meminfo", &rep))) {
- return;
+ return 0;
}
while (!feof(meminfo_fp)) {
info.bufmem = info.cached + info.buffers;
fclose(meminfo_fp);
+ return 0;
}
int get_laptop_mode(void)
/* Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT */
#define RT_ENTRY_FORMAT "%63s %lx %lx %x %*d %*d %*d %lx %*d %*d %*d\n"
-void update_gateway_info(void)
+int update_gateway_info(void)
{
FILE *fp;
struct in_addr ina;
if ((fp = fopen("/proc/net/route", "r")) == NULL) {
update_gateway_info_failure("fopen()");
- return;
+ return 0;
}
/* skip over the table header line, which is always present */
}
}
fclose(fp);
- return;
+ return 0;
}
void free_gateway_info(void)
snprintf(p, p_max_size, "%s", gw_info.ip);
}
-void update_net_stats(void)
+int update_net_stats(void)
{
FILE *net_dev_fp;
static int rep = 0;
/* get delta */
delta = current_update_time - last_update_time;
if (delta <= 0.0001) {
- return;
+ return 0;
}
/* open file and ignore first two lines */
if (!(net_dev_fp = open_file("/proc/net/dev", &rep))) {
clear_net_stats();
- return;
+ return 0;
}
fgets(buf, 255, net_dev_fp); /* garbage */
curtmp1 = curtmp1 + ns->net_rec[i];
curtmp2 = curtmp2 + ns->net_trans[i];
}
- if (curtmp1 == 0) {
- curtmp1 = 1;
- }
- if (curtmp2 == 0) {
- curtmp2 = 1;
- }
ns->recv_speed = curtmp1 / (double) info.net_avg_samples;
ns->trans_speed = curtmp2 / (double) info.net_avg_samples;
if (info.net_avg_samples > 1) {
first = 0;
fclose(net_dev_fp);
+ return 0;
}
int result;
-void update_total_processes(void)
+int update_total_processes(void)
{
DIR *dir;
struct dirent *entry;
info.procs = 0;
if (!(dir = opendir("/proc"))) {
- return;
+ return 0;
}
while ((entry = readdir(dir))) {
if (!entry) {
/* Problem reading list of processes */
closedir(dir);
info.procs = 0;
- return;
+ return 0;
}
if (sscanf(entry->d_name, "%d%c", &ignore1, &ignore2) == 1) {
info.procs++;
}
}
closedir(dir);
+ return 0;
}
-void update_threads(void)
+int update_threads(void)
{
#ifdef HAVE_SYSINFO
if (!prefer_proc) {
if (!(fp = open_file("/proc/loadavg", &rep))) {
info.threads = 0;
- return;
+ return 0;
}
fscanf(fp, "%*f %*f %*f %*d/%hu", &info.threads);
fclose(fp);
}
+ return 0;
}
#define CPU_SAMPLE_COUNT 15
#define TMPL_LONGSTAT "%*s %llu %llu %llu %llu %llu %llu %llu %llu"
#define TMPL_SHORTSTAT "%*s %llu %llu %llu %llu"
-void update_stat(void)
+int update_stat(void)
{
FILE *stat_fp;
static int rep = 0;
const char *stat_template = NULL;
unsigned int malloc_cpu_size = 0;
extern void* global_cpu;
+
+ static pthread_mutex_t last_stat_update_mutex = PTHREAD_MUTEX_INITIALIZER;
static double last_stat_update = 0.0;
/* since we use wrappers for this function, the update machinery
* can't eliminate double invocations of this function. Check for
* them here, otherwise cpu_usage counters are freaking out. */
- if (last_stat_update == current_update_time)
- return;
+ pthread_mutex_lock(&last_stat_update_mutex);
+ if (last_stat_update == current_update_time) {
+ pthread_mutex_unlock(&last_stat_update_mutex);
+ return 0;
+ }
last_stat_update = current_update_time;
+ pthread_mutex_unlock(&last_stat_update_mutex);
/* add check for !info.cpu_usage since that mem is freed on a SIGUSR1 */
if (!cpu_setup || !info.cpu_usage) {
if (info.cpu_usage) {
memset(info.cpu_usage, 0, info.cpu_count * sizeof(float));
}
- return;
+ return 0;
}
idx = 0;
}
}
fclose(stat_fp);
+ return 0;
}
-void update_running_processes(void)
+int update_running_processes(void)
{
update_stat();
+ return 0;
}
-void update_cpu_usage(void)
+int update_cpu_usage(void)
{
update_stat();
+ return 0;
}
-void update_load_average(void)
+int update_load_average(void)
{
#ifdef HAVE_GETLOADAVG
if (!prefer_proc) {
if (!(fp = open_file("/proc/loadavg", &rep))) {
info.loadavg[0] = info.loadavg[1] = info.loadavg[2] = 0.0;
- return;
+ return 0;
}
fscanf(fp, "%f %f %f", &info.loadavg[0], &info.loadavg[1],
&info.loadavg[2]);
fclose(fp);
}
+ return 0;
}
/***********************************************************/
snprintf(p_client_buffer, client_buffer_size, "%s", buf);
}
-#define SYSFS_AC_ADAPTER_DIR "/sys/class/power_supply/AC"
+#define SYSFS_AC_ADAPTER_DIR "/sys/class/power_supply"
#define ACPI_AC_ADAPTER_DIR "/proc/acpi/ac_adapter/"
/* Linux 2.6.25 onwards ac adapter info is in
/sys/class/power_supply/AC/
POWER_SUPPLY_NAME=AC
POWER_SUPPLY_TYPE=Mains
POWER_SUPPLY_ONLINE=1
+
+ Update: it seems the folder name is hardware-dependent. We add an aditional adapter
+ argument, specifying the folder name.
+
+ Update: on some systems it's /sys/class/power_supply/ADP1 instead of /sys/class/power_supply/AC
*/
-void get_acpi_ac_adapter(char *p_client_buffer, size_t client_buffer_size)
+void get_acpi_ac_adapter(char *p_client_buffer, size_t client_buffer_size, const char *adapter)
{
static int rep = 0;
char buf[256];
char buf2[256];
+ struct stat sb;
FILE *fp;
if (!p_client_buffer || client_buffer_size <= 0) {
return;
}
- snprintf(buf2, sizeof(buf2), "%s/uevent", SYSFS_AC_ADAPTER_DIR);
- fp = open_file(buf2, &rep);
+ if(adapter)
+ snprintf(buf2, sizeof(buf2), "%s/%s/uevent", SYSFS_AC_ADAPTER_DIR, adapter);
+ else{
+ snprintf(buf2, sizeof(buf2), "%s/AC/uevent", SYSFS_AC_ADAPTER_DIR);
+ if(stat(buf2, &sb) == -1) snprintf(buf2, sizeof(buf2), "%s/ADP1/uevent", SYSFS_AC_ADAPTER_DIR);
+ }
+ if(stat(buf2, &sb) == 0) fp = open_file(buf2, &rep); else fp = 0;
if (fp) {
/* sysfs processing */
while (!feof(fp)) {
On some systems POWER_SUPPLY_ENERGY_* is replaced by POWER_SUPPLY_CHARGE_*
*/
+/*on n900 with power kernel: (non power kernel could use "hal-device bme" and do something else)
+/sys/class/power_supply/bq27200-0/uevent
+PHYSDEVPATH=/class/i2c-adapter/i2c-2/2-0055
+PHYSDEVBUS=i2c
+PHYSDEVDRIVER=bq27200-battery
+POWER_SUPPLY_NAME=bq27200-0
+POWER_SUPPLY_TYPE=Battery
+POWER_SUPPLY_PRESENT=1 << this is always 1, it means the battery is inserted
+POWER_SUPPLY_VOLTAGE_NOW=4039 << this keeps updating during charging
+POWER_SUPPLY_CURRENT_NOW=1960 << this goes negative when charging!
+POWER_SUPPLY_CAPACITY=98 << supposed to be the %, I THOUGHT it stops updating when charging until it hits 100%, but maybe not?
+POWER_SUPPLY_TEMP=39 << only temperature sensor in n900 :(
+*/
+
#define SYSFS_BATTERY_BASE_PATH "/sys/class/power_supply"
-#define ACPI_BATTERY_BASE_PATH "/proc/acpi/battery"
-#define APM_PATH "/proc/apm"
-#define MAX_BATTERY_COUNT 4
+#define ACPI_BATTERY_BASE_PATH "/proc/acpi/battery" //not for n900
+#define APM_PATH "/proc/apm" //not for n900
+#define MAX_BATTERY_COUNT 4 //more like 1
static FILE *sysfs_bat_fp[MAX_BATTERY_COUNT] = { NULL, NULL, NULL, NULL };
static FILE *acpi_bat_fp[MAX_BATTERY_COUNT] = { NULL, NULL, NULL, NULL };
if (sysfs_bat_fp[idx] != NULL) {
/* SYSFS */
- int present_rate = -1;
- int remaining_capacity = -1;
- char charging_state[64];
+ int present_rate = -9999; //we will put "current now" into this. negative when charging!
+ int remaining_capacity = -1; //in %
+ char charging_state[64];//can't get this without hal bme
+ int voltage = -1;
+ //int capacity = -1;
+ int temp = 9999;
char present[4];
-
+ strcpy(present, "no");
strcpy(charging_state, "unknown");
while (!feof(sysfs_bat_fp[idx])) {
/* let's just hope units are ok */
if (strncmp (buf, "POWER_SUPPLY_PRESENT=1", 22) == 0)
- strcpy(present, "yes");
- else if (strncmp (buf, "POWER_SUPPLY_PRESENT=0", 22) == 0)
- strcpy(present, "no");
- else if (strncmp (buf, "POWER_SUPPLY_STATUS=", 20) == 0)
- sscanf(buf, "POWER_SUPPLY_STATUS=%63s", charging_state);
- /* present_rate is not the same as the
- current flowing now but it is the same value
- which was used in the past. so we continue
- the tradition! */
+ strcpy(present, "yes");//n900 always yes
+ else if (strncmp(buf, "POWER_SUPPLY_VOLTAGE_NOW=", 25) == 0)
+ sscanf(buf, "POWER_SUPPLY_VOLTAGE_NOW=%d", &voltage);
+// else if (strncmp (buf, "POWER_SUPPLY_STATUS=", 20) == 0)
+// sscanf(buf, "POWER_SUPPLY_STATUS=%63s", charging_state);
else if (strncmp(buf, "POWER_SUPPLY_CURRENT_NOW=", 25) == 0)
sscanf(buf, "POWER_SUPPLY_CURRENT_NOW=%d", &present_rate);
- else if (strncmp(buf, "POWER_SUPPLY_ENERGY_NOW=", 24) == 0)
- sscanf(buf, "POWER_SUPPLY_ENERGY_NOW=%d", &remaining_capacity);
- else if (strncmp(buf, "POWER_SUPPLY_ENERGY_FULL=", 25) == 0)
- sscanf(buf, "POWER_SUPPLY_ENERGY_FULL=%d", &acpi_last_full[idx]);
- else if (strncmp(buf, "POWER_SUPPLY_CHARGE_NOW=", 24) == 0)
- sscanf(buf, "POWER_SUPPLY_CHARGE_NOW=%d", &remaining_capacity);
- else if (strncmp(buf, "POWER_SUPPLY_CHARGE_FULL=", 25) == 0)
- sscanf(buf, "POWER_SUPPLY_CHARGE_FULL=%d", &acpi_last_full[idx]);
+ else if (strncmp(buf, "POWER_SUPPLY_CAPACITY=", 22) == 0)
+ sscanf(buf, "POWER_SUPPLY_CAPACITY=%d", &remaining_capacity);
+ else if (strncmp(buf, "POWER_SUPPLY_TEMP=", 18) == 0)
+ sscanf(buf, "POWER_SUPPLY_TEMP=%d", &temp);
+// else if (strncmp(buf, "POWER_SUPPLY_ENERGY_NOW=", 24) == 0)
+// sscanf(buf, "POWER_SUPPLY_ENERGY_NOW=%d", &remaining_capacity);
+// else if (strncmp(buf, "POWER_SUPPLY_ENERGY_FULL=", 25) == 0)
+// sscanf(buf, "POWER_SUPPLY_ENERGY_FULL=%d", &acpi_last_full[idx]);
+// else if (strncmp(buf, "POWER_SUPPLY_CHARGE_NOW=", 24) == 0)
+// sscanf(buf, "POWER_SUPPLY_CHARGE_NOW=%d", &remaining_capacity);
+// else if (strncmp(buf, "POWER_SUPPLY_CHARGE_FULL=", 25) == 0)
+// sscanf(buf, "POWER_SUPPLY_CHARGE_FULL=%d", &acpi_last_full[idx]);
}
fclose(sysfs_bat_fp[idx]);
sysfs_bat_fp[idx] = NULL;
/* Hellf[i]re notes that remaining capacity can exceed acpi_last_full */
- if (remaining_capacity > acpi_last_full[idx])
- acpi_last_full[idx] = remaining_capacity; /* normalize to 100% */
+ //lance notes, we don't care
+// if (remaining_capacity > acpi_last_full[idx])
+// acpi_last_full[idx] = remaining_capacity; /* normalize to 100% */
/* not present */
- if (strcmp(present, "No") == 0) {
- strncpy(last_battery_str[idx], "not present", 64);
- }
+ //not possible
+// if (strcmp(present, "no") == 0) {
+// strncpy(last_battery_str[idx], "not present", 64);
+// }
/* charging */
- else if (strcmp(charging_state, "Charging") == 0) {
- if (acpi_last_full[idx] != 0 && present_rate > 0) {
+ if (present_rate <= 0) {//if charging
/* e.g. charging 75% */
- snprintf(last_battery_str[idx], sizeof(last_battery_str[idx])-1, "charging %i%%",
- (int) (((float) remaining_capacity / acpi_last_full[idx]) * 100 ));
+ snprintf(last_battery_str[idx], sizeof(last_battery_str[idx])-1, "charging %i%%", remaining_capacity);
+ snprintf(last_battery_time_str[idx], sizeof(last_battery_time_str[idx]) - 1, "unknown");
/* e.g. 2h 37m */
- format_seconds(last_battery_time_str[idx], sizeof(last_battery_time_str[idx])-1,
- (long) (((float)(acpi_last_full[idx] - remaining_capacity) / present_rate) * 3600));
- } else if (acpi_last_full[idx] != 0 && present_rate <= 0) {
- snprintf(last_battery_str[idx], sizeof(last_battery_str[idx])-1, "charging %d%%",
- (int) (((float)remaining_capacity / acpi_last_full[idx]) * 100));
- snprintf(last_battery_time_str[idx],
- sizeof(last_battery_time_str[idx]) - 1, "unknown");
- } else {
- strncpy(last_battery_str[idx], "charging", sizeof(last_battery_str[idx])-1);
- snprintf(last_battery_time_str[idx],
- sizeof(last_battery_time_str[idx]) - 1, "unknown");
- }
- }
+// format_seconds(last_battery_time_str[idx], sizeof(last_battery_time_str[idx])-1,
+// (long) (((float)(acpi_last_full[idx] - remaining_capacity) / present_rate) * 3600));
+ }
+
+// else if (acpi_last_full[idx] != 0 && present_rate <= 0) {//supposed to be guessing the time to fully charge, won't work though.
+// snprintf(last_battery_str[idx], sizeof(last_battery_str[idx])-1, "charging %d%%",
+// (int) (((float)remaining_capacity / acpi_last_full[idx]) * 100));
+// snprintf(last_battery_time_str[idx],
+// sizeof(last_battery_time_str[idx]) - 1, "unknown");
+// } else {
+// strncpy(last_battery_str[idx], "charging", sizeof(last_battery_str[idx])-1);
+// snprintf(last_battery_time_str[idx],
+// sizeof(last_battery_time_str[idx]) - 1, "unknown");
+// }
+// }
/* discharging */
- else if (strncmp(charging_state, "Discharging", 64) == 0) {
- if (present_rate > 0) {
+ else if (present_rate > 0) {
+
/* e.g. discharging 35% */
- snprintf(last_battery_str[idx], sizeof(last_battery_str[idx])-1, "discharging %i%%",
- (int) (((float) remaining_capacity / acpi_last_full[idx]) * 100 ));
- /* e.g. 1h 12m */
- format_seconds(last_battery_time_str[idx], sizeof(last_battery_time_str[idx])-1,
- (long) (((float) remaining_capacity / present_rate) * 3600));
- } else if (present_rate == 0) { /* Thanks to Nexox for this one */
- snprintf(last_battery_str[idx], sizeof(last_battery_str[idx])-1, "full");
- snprintf(last_battery_time_str[idx],
- sizeof(last_battery_time_str[idx]) - 1, "unknown");
- } else {
- snprintf(last_battery_str[idx], sizeof(last_battery_str[idx])-1,
- "discharging %d%%",
- (int) (((float)remaining_capacity / acpi_last_full[idx]) * 100));
- snprintf(last_battery_time_str[idx],
+ snprintf(last_battery_str[idx], sizeof(last_battery_str[idx])-1, "discharging %i%%", remaining_capacity);
+
+ snprintf(last_battery_time_str[idx],
sizeof(last_battery_time_str[idx]) - 1, "unknown");
- }
+ /* e.g. 1h 12m */
+// format_seconds(last_battery_time_str[idx], sizeof(last_battery_time_str[idx])-1,
+// (long) (((float) remaining_capacity / present_rate) * 3600));
+// else {
+// snprintf(last_battery_str[idx], sizeof(last_battery_str[idx])-1,
+// "discharging %d%%",
+// (int) (((float)remaining_capacity / acpi_last_full[idx]) * 100));
+// snprintf(last_battery_time_str[idx],
+// sizeof(last_battery_time_str[idx]) - 1, "unknown");
+// }
}
/* charged */
/* thanks to Lukas Zapletal <lzap@seznam.cz> */
- else if (strncmp(charging_state, "Charged", 64) == 0 || strncmp(charging_state, "Full", 64) == 0) {
- /* Below happens with the second battery on my X40,
- * when the second one is empty and the first one
- * being charged. */
- if (remaining_capacity == 0)
- strcpy(last_battery_str[idx], "empty");
- else
- strcpy(last_battery_str[idx], "charged");
- }
+
+ if (remaining_capacity == 100)
+ strcpy(last_battery_str[idx], "charged");
+
+// else if (strncmp(charging_state, "Charged", 64) == 0 || strncmp(charging_state, "Full", 64) == 0) {
+// /* Below happens with the second battery on my X40,
+// * when the second one is empty and the first one
+// * being charged. */
+// if (remaining_capacity == 0)
+// strcpy(last_battery_str[idx], "empty");
+// else
+// strcpy(last_battery_str[idx], "charged");
+// }
/* unknown, probably full / AC */
- else {
- if (acpi_last_full[idx] != 0
- && remaining_capacity != acpi_last_full[idx])
- snprintf(last_battery_str[idx], 64, "unknown %d%%",
- (int) (((float)remaining_capacity / acpi_last_full[idx]) * 100));
- else
- strncpy(last_battery_str[idx], "AC", 64);
- }
- } else if (acpi_bat_fp[idx] != NULL) {
+// else {
+// if (acpi_last_full[idx] != 0
+// && remaining_capacity != acpi_last_full[idx])
+// snprintf(last_battery_str[idx], 64, "unknown %d%%",
+// (int) (((float)remaining_capacity / acpi_last_full[idx]) * 100));
+// else
+// strncpy(last_battery_str[idx], "AC", 64);
+// }
+ } else if (acpi_bat_fp[idx] != NULL) {//skipped on n900
/* ACPI */
int present_rate = -1;
int remaining_capacity = -1;
}
fclose(acpi_bat_fp[idx]);
acpi_bat_fp[idx] = NULL;
- } else {
+ } else {//also skipped on n900
/* APM */
if (apm_bat_fp[idx] == NULL) {
apm_bat_fp[idx] = open_file(APM_PATH, &rep2);
}
last_battery_perct_time[idx] = current_update_time;
- /* Only check for SYSFS or ACPI */
+ /* Only check for SYSFS */
if (sysfs_bat_fp[idx] == NULL && acpi_bat_fp[idx] == NULL && apm_bat_fp[idx] == NULL) {
sysfs_bat_fp[idx] = open_file(sysfs_path, &rep);
char buf[256];
if (fgets(buf, 256, sysfs_bat_fp[idx]) == NULL)
break;
-
- if (strncmp(buf, "POWER_SUPPLY_CHARGE_NOW=", 24) == 0) {
- sscanf(buf, "POWER_SUPPLY_CHARGE_NOW=%d", &remaining_capacity);
- } else if (strncmp(buf, "POWER_SUPPLY_CHARGE_FULL=",25) == 0) {
- sscanf(buf, "POWER_SUPPLY_CHARGE_FULL=%d", &acpi_design_capacity[idx]);
- } else if (strncmp(buf, "POWER_SUPPLY_ENERGY_NOW=", 24) == 0) {
- sscanf(buf, "POWER_SUPPLY_ENERGY_NOW=%d", &remaining_capacity);
- } else if (strncmp(buf, "POWER_SUPPLY_ENERGY_FULL=",25) == 0) {
- sscanf(buf, "POWER_SUPPLY_ENERGY_FULL=%d", &acpi_design_capacity[idx]);
+ if (strncmp(buf, "POWER_SUPPLY_CAPACITY=", 22) == 0) {
+ sscanf(buf, "POWER_SUPPLY_CAPACITY=%d", &remaining_capacity);
+
+// if (strncmp(buf, "POWER_SUPPLY_CHARGE_NOW=", 24) == 0) {
+// sscanf(buf, "POWER_SUPPLY_CHARGE_NOW=%d", &remaining_capacity);
+// } else if (strncmp(buf, "POWER_SUPPLY_CHARGE_FULL=",25) == 0) {
+// sscanf(buf, "POWER_SUPPLY_CHARGE_FULL=%d", &acpi_design_capacity[idx]);
+// } else if (strncmp(buf, "POWER_SUPPLY_ENERGY_NOW=", 24) == 0) {
+// sscanf(buf, "POWER_SUPPLY_ENERGY_NOW=%d", &remaining_capacity);
+// } else if (strncmp(buf, "POWER_SUPPLY_ENERGY_FULL=",25) == 0) {
+// sscanf(buf, "POWER_SUPPLY_ENERGY_FULL=%d", &acpi_design_capacity[idx]);
+// }
}
}
-
fclose(sysfs_bat_fp[idx]);
sysfs_bat_fp[idx] = NULL;
- } else if (acpi_bat_fp[idx] != NULL) {
- /* ACPI */
- /* read last full capacity if it's zero */
- if (acpi_design_capacity[idx] == 0) {
- static int rep2;
- char path[128];
- FILE *fp;
-
- snprintf(path, 127, ACPI_BATTERY_BASE_PATH "/%s/info", bat);
- fp = open_file(path, &rep2);
- if (fp != NULL) {
- while (!feof(fp)) {
- char b[256];
-
- if (fgets(b, 256, fp) == NULL) {
- break;
- }
- if (sscanf(b, "last full capacity: %d",
- &acpi_design_capacity[idx]) != 0) {
- break;
- }
- }
- fclose(fp);
- }
- }
-
- fseek(acpi_bat_fp[idx], 0, SEEK_SET);
-
- while (!feof(acpi_bat_fp[idx])) {
- char buf[256];
-
- if (fgets(buf, 256, acpi_bat_fp[idx]) == NULL) {
- break;
- }
-
- if (buf[0] == 'r') {
- sscanf(buf, "remaining capacity: %d", &remaining_capacity);
- }
- }
- }
+ }
+// else if (acpi_bat_fp[idx] != NULL) {
+// /* ACPI */
+// /* read last full capacity if it's zero */
+// if (acpi_design_capacity[idx] == 0) {
+// static int rep2;
+// char path[128];
+// FILE *fp;
+//
+// snprintf(path, 127, ACPI_BATTERY_BASE_PATH "/%s/info", bat);
+// fp = open_file(path, &rep2);
+// if (fp != NULL) {
+// while (!feof(fp)) {
+// char b[256];
+//
+// if (fgets(b, 256, fp) == NULL) {
+// break;
+// }
+// if (sscanf(b, "last full capacity: %d",
+// &acpi_design_capacity[idx]) != 0) {
+// break;
+// }
+// }
+// fclose(fp);
+// }
+// }
+//
+// fseek(acpi_bat_fp[idx], 0, SEEK_SET);
+//
+// while (!feof(acpi_bat_fp[idx])) {
+// char buf[256];
+//
+// if (fgets(buf, 256, acpi_bat_fp[idx]) == NULL) {
+// break;
+// }
+//
+// if (buf[0] == 'r') {
+// sscanf(buf, "remaining capacity: %d", &remaining_capacity);
+// }
+// }
+// }
if (remaining_capacity < 0) {
return 0;
}
/* compute the battery percentage */
- last_battery_perct[idx] =
- (int) (((float) remaining_capacity / acpi_design_capacity[idx]) * 100);
- if (last_battery_perct[idx] > 100) last_battery_perct[idx] = 100;
+ last_battery_perct[idx] =
+ remaining_capacity;
+ //(int) (((float) remaining_capacity / acpi_design_capacity[idx]) * 100);
+ //if (last_battery_perct[idx] > 100) last_battery_perct[idx] = 100;
return last_battery_perct[idx];
}
snprintf(buffer, n, "%s", pb_battery_info[i]);
}
-void update_top(void)
+int update_top(void)
{
process_find_top(info.cpu, info.memu, info.time
#ifdef IOSTATS
#endif
);
info.first_process = get_first_process();
+ return 0;
}
#define ENTROPY_AVAIL_PATH "/proc/sys/kernel/random/entropy_avail"
return (state > 0) ? "frozen" : "free ";
}
-void update_diskio(void)
+typedef struct DEV_LIST_TYPE
+{
+ char *dev_name;
+ int memoized;
+ struct DEV_LIST_TYPE *next;
+
+} DEV_LIST, *DEV_LIST_PTR;
+
+/* Same as sf #2942117 but memoized using a linked list */
+int is_disk(char *dev)
+{
+ char syspath[PATH_MAX];
+ char *slash;
+ static DEV_LIST_PTR dev_head = NULL;
+ DEV_LIST_PTR dev_cur, dev_last;
+
+ dev_cur = dev_head;
+
+ while (dev_cur) {
+ if (strcmp(dev_cur->dev_name, dev) == 0)
+ return dev_cur->memoized;
+ dev_last = dev_cur;
+ dev_cur = dev_cur->next;
+ }
+
+ dev_cur = (DEV_LIST_PTR)malloc(sizeof(DEV_LIST));
+ dev_cur->dev_name = (char *)malloc((strlen(dev)+1)*sizeof(char));
+ strcpy(dev_cur->dev_name,dev);
+ dev_cur->next = NULL;
+
+ while ((slash = strchr(dev, '/')))
+ *slash = '!';
+ snprintf(syspath, sizeof(syspath), "/sys/block/%s", dev);
+ dev_cur->memoized = !(access(syspath, F_OK));
+
+ if (dev_head)
+ dev_last->next = dev_cur;
+ else
+ dev_head = dev_cur;
+
+ return dev_cur->memoized;
+}
+
+int update_diskio(void)
{
FILE *fp;
static int rep = 0;
stats.current_write = 0;
if (!(fp = open_file("/proc/diskstats", &rep))) {
- return;
+ return 0;
}
/* read reads and writes from all disks (minor = 0), including cd-roms
* XXX: ignore devices which are part of a SW RAID (MD_MAJOR) */
if (col_count == 5 && major != LVM_BLK_MAJOR && major != NBD_MAJOR
&& major != RAMDISK_MAJOR && major != LOOP_MAJOR) {
- total_reads += reads;
- total_writes += writes;
+ /* check needed for kernel >= 2.6.31, see sf #2942117 */
+ if (is_disk(devbuf)) {
+ total_reads += reads;
+ total_writes += writes;
+ }
} else {
col_count = sscanf(buf, "%u %u %s %*u %u %*u %u",
&major, &minor, devbuf, &reads, &writes);
}
update_diskio_values(&stats, total_reads, total_writes);
fclose(fp);
+ return 0;
}