@item Malta board (32-bit MIPS processor)
@item ARM Integrator/CP (ARM926E or 1026E processor)
@item ARM Versatile baseboard (ARM926E)
+@item ARM RealView Emulation baseboard (ARM926EJ-S)
@end itemize
For user emulation, x86, PowerPC, ARM, MIPS, Sparc32/64 and ColdFire(m68k) CPUs are supported.
the console. Therefore, you can still use QEMU to debug a Linux kernel
with a serial console.
+@item -no-frame
+
+Do not use decorations for SDL windows and start them using the whole
+available screen space. This makes the using QEMU in a dedicated desktop
+workspace more convenient.
+
@item -vnc display
Normally, QEMU uses SDL to display the VGA output. With this option,
Load the contents of file as an option ROM. This option is useful to load
things like EtherBoot.
+@item -name string
+Sets the name of the guest. This name will be display in the SDL window
+caption. The name will also be used for the VNC server.
+
@end table
USB options:
override the default configuration (@option{-net nic -net user}) which
is activated if no @option{-net} options are provided.
-@item -tftp prefix
+@item -tftp dir
When using the user mode network stack, activate a built-in TFTP
-server. All filenames beginning with @var{prefix} can be downloaded
-from the host to the guest using a TFTP client. The TFTP client on the
-guest must be configured in binary mode (use the command @code{bin} of
-the Unix TFTP client). The host IP address on the guest is as usual
-10.0.2.2.
+server. The files in @var{dir} will be exposed as the root of a TFTP server.
+The TFTP client on the guest must be configured in binary mode (use the command
+@code{bin} of the Unix TFTP client). The host IP address on the guest is as
+usual 10.0.2.2.
+
+@item -bootp file
+When using the user mode network stack, broadcast @var{file} as the BOOTP
+filename. In conjunction with @option{-tftp}, this can be used to network boot
+a guest from a local directory.
+
+Example (using pxelinux):
+@example
+qemu -hda linux.img -boot n -tftp /path/to/tftp/files -bootp /pxelinux.0
+@end example
@item -smb dir
When using the user mode network stack, activate a built-in SMB
parameters are set according to the emulated ones.
@item /dev/parportN
[Linux only, parallel port only] Use host parallel port
-@var{N}. Currently only SPP parallel port features can be used.
+@var{N}. Currently SPP and EPP parallel port features can be used.
@item file:filename
Write output to filename. No character can be read.
@item stdio
same as if you had specified @code{-serial tcp} except the unix domain socket
@var{path} is used for connections.
+@item mon:dev_string
+This is a special option to allow the monitor to be multiplexed onto
+another serial port. The monitor is accessed with key sequence of
+@key{Control-a} and then pressing @key{c}. See monitor access
+@ref{pcsys_keys} in the -nographic section for more keys.
+@var{dev_string} should be any one of the serial devices specified
+above. An example to multiplex the monitor onto a telnet server
+listening on port 4444 would be:
+@table @code
+@item -serial mon:telnet::4444,server,nowait
+@end table
+
@end table
@item -parallel dev
The default device is @code{vc} in graphical mode and @code{stdio} in
non graphical mode.
+@item -echr numeric_ascii_value
+Change the escape character used for switching to the monitor when using
+monitor and serial sharing. The default is @code{0x01} when using the
+@code{-nographic} option. @code{0x01} is equal to pressing
+@code{Control-a}. You can select a different character from the ascii
+control keys where 1 through 26 map to Control-a through Control-z. For
+instance you could use the either of the following to change the escape
+character to Control-t.
+@table @code
+@item -echr 0x14
+@item -echr 20
+@end table
+
@item -s
Wait gdb connection to port 1234 (@pxref{gdb_usage}).
@item -p port
Exit emulator
@item Ctrl-a s
Save disk data back to file (if -snapshot)
+@item Ctrl-a t
+toggle console timestamps
@item Ctrl-a b
Send break (magic sysrq in Linux)
@item Ctrl-a c
@itemize @minus
@item
-Remove or insert removable medias images
+Remove or insert removable media images
(such as CD-ROM or floppies)
@item
Quit the emulator.
@item eject [-f] device
-Eject a removable media (use -f to force it).
+Eject a removable medium (use -f to force it).
@item change device filename
-Change a removable media.
+Change a removable medium.
@item screendump filename
Save screen into PPM image @var{filename}.
alternate syntax @file{\\.\d:} is supported. @file{/dev/cdrom} is
supported as an alias to the first CDROM drive.
-Currently there is no specific code to handle removable medias, so it
+Currently there is no specific code to handle removable media, so it
is better to use the @code{change} or @code{eject} monitor commands to
change or eject media.
@item Hard disks
@file{/dev/cdrom} is an alias to the first CDROM.
-Currently there is no specific code to handle removable medias, so it
+Currently there is no specific code to handle removable media, so it
is better to use the @code{change} or @code{eject} monitor commands to
change or eject media.
PL110 LCD controller
@item
PL050 KMI with PS/2 keyboard and mouse.
+@item
+PL181 MultiMedia Card Interface with SD card.
@end itemize
The ARM Versatile baseboard is emulated with the following devices:
PCI OHCI USB controller.
@item
LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM devices.
+@item
+PL181 MultiMedia Card Interface with SD card.
+@end itemize
+
+The ARM RealView Emulation baseboard is emulated with the following devices:
+
+@itemize @minus
+@item
+ARM926E CPU
+@item
+ARM AMBA Generic/Distributed Interrupt Controller
+@item
+Four PL011 UARTs
+@item
+SMC 91c111 Ethernet adapter
+@item
+PL110 LCD controller
+@item
+PL050 KMI with PS/2 keyboard and mouse
+@item
+PCI host bridge
+@item
+PCI OHCI USB controller
+@item
+LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM devices
+@item
+PL181 MultiMedia Card Interface with SD card.
@end itemize
A Linux 2.6 test image is available on the QEMU web site. More
@code{-L /} tells that the x86 dynamic linker must be searched with a
@file{/} prefix.
-@item Since QEMU is also a linux process, you can launch qemu with qemu (NOTE: you can only do that if you compiled QEMU from the sources):
+@item Since QEMU is also a linux process, you can launch qemu with
+qemu (NOTE: you can only do that if you compiled QEMU from the sources):
@example
qemu-i386 -L / qemu-i386 -L / /bin/ls
@item
target PowerPC on x86: Not working as the ppc commpage can't be mapped (yet!)
@item
-target x86 on x86: Most apps (Cocoa and Carbon too) works. [1]
+target PowerPC on PowerPC: Most apps (Cocoa and Carbon too) works. [1]
@item
target x86 on PowerPC: most utilities work. Cocoa and Carbon apps are not yet supported.
@end itemize
libraries:
@example
-qemu-darwin-i386 /bin/ls
+qemu-i386 /bin/ls
@end example
or to run the ppc version of the executable:
@example
-qemu-darwin-ppc /bin/ls
+qemu-ppc /bin/ls
@end example
@item On ppc, you'll have to tell qemu where your x86 libraries (and dynamic linker)
are installed:
@example
-qemu-darwin-i386 -L /opt/x86_root/ /bin/ls
+qemu-i386 -L /opt/x86_root/ /bin/ls
@end example
@code{-L /opt/x86_root/} tells that the dynamic linker (dyld) path is in
@subsection Command line options
@example
-usage: qemu-darwin-i386 [-h] [-d] [-L path] [-s size] program [arguments...]
+usage: qemu-i386 [-h] [-d] [-L path] [-s size] program [arguments...]
@end example
@table @option