#include "config.h"
#include "coord.h"
#include "debug.h"
+#include "item.h"
#include "map.h"
#include "transform.h"
#include "projection.h"
#include "point.h"
-#include "item.h"
+
+#define POST_SHIFT 8
struct transformation {
- long scale; /* Scale factor */
- int angle; /* Rotation angle */
- double cos_val,sin_val; /* cos and sin of rotation angle */
- enum projection pro;
+ int yaw; /* Rotation angle */
+ int pitch;
+ int ddd;
+ int m00,m01,m02; /* 3d transformation matrix */
+ int m10,m11,m12;
+ int m20,m21,m22;
+ int xscale,yscale,wscale;
+ int xscale3d,yscale3d,wscale3d;
+#ifdef ENABLE_ROLL
+ int roll;
+ int hog;
+#endif
+ navit_float im00,im01,im02; /* inverse 3d transformation matrix */
+ navit_float im10,im11,im12;
+ navit_float im20,im21,im22;
struct map_selection *map_sel;
struct map_selection *screen_sel;
struct point screen_center;
+ int screen_dist;
+ int offx,offy,offz;
+ int znear,zfar;
struct coord map_center; /* Center of source rectangle */
+ enum projection pro;
+ navit_float scale; /* Scale factor */
+ int scale_shift;
+ int order;
+ int order_base;
};
+#ifdef ENABLE_ROLL
+#define HOG(t) ((t).hog)
+#else
+#define HOG(t) 0
+#endif
+
+static void
+transform_set_screen_dist(struct transformation *t, int dist)
+{
+ t->screen_dist=dist;
+ t->xscale3d=dist;
+ t->yscale3d=dist;
+ t->wscale3d=dist << POST_SHIFT;
+}
+
+static void
+transform_setup_matrix(struct transformation *t)
+{
+ navit_float det;
+ navit_float fac;
+ navit_float yawc=navit_cos(-M_PI*t->yaw/180);
+ navit_float yaws=navit_sin(-M_PI*t->yaw/180);
+ navit_float pitchc=navit_cos(-M_PI*t->pitch/180);
+ navit_float pitchs=navit_sin(-M_PI*t->pitch/180);
+#ifdef ENABLE_ROLL
+ navit_float rollc=navit_cos(M_PI*t->roll/180);
+ navit_float rolls=navit_sin(M_PI*t->roll/180);
+#else
+ navit_float rollc=1;
+ navit_float rolls=0;
+#endif
+
+ int scale=t->scale;
+ int order_dir=-1;
+
+ dbg(1,"yaw=%d pitch=%d center=0x%x,0x%x\n", t->yaw, t->pitch, t->map_center.x, t->map_center.y);
+ t->znear=1 << POST_SHIFT;
+ t->zfar=300*t->znear;
+ t->scale_shift=0;
+ t->order=t->order_base;
+ if (t->scale >= 1) {
+ scale=t->scale;
+ } else {
+ scale=1.0/t->scale;
+ order_dir=1;
+ }
+ while (scale > 1) {
+ if (order_dir < 0)
+ t->scale_shift++;
+ t->order+=order_dir;
+ scale >>= 1;
+ }
+ fac=(1 << POST_SHIFT) * (1 << t->scale_shift) / t->scale;
+ dbg(1,"scale_shift=%d order=%d scale=%f fac=%f\n", t->scale_shift, t->order,t->scale,fac);
+
+ t->m00=rollc*yawc*fac;
+ t->m01=rollc*yaws*fac;
+ t->m02=-rolls*fac;
+ t->m10=(pitchs*rolls*yawc-pitchc*yaws)*(-fac);
+ t->m11=(pitchs*rolls*yaws+pitchc*yawc)*(-fac);
+ t->m12=pitchs*rollc*(-fac);
+ t->m20=(pitchc*rolls*yawc+pitchs*yaws)*fac;
+ t->m21=(pitchc*rolls*yaws-pitchs*yawc)*fac;
+ t->m22=pitchc*rollc*fac;
+
+ t->offx=t->screen_center.x;
+ t->offy=t->screen_center.y;
+ if (t->pitch) {
+ t->ddd=1;
+ t->offz=t->screen_dist;
+ dbg(1,"near %d far %d\n",t->znear,t->zfar);
+ t->xscale=t->xscale3d;
+ t->yscale=t->yscale3d;
+ t->wscale=t->wscale3d;
+ } else {
+ t->ddd=0;
+ t->offz=0;
+ t->xscale=1;
+ t->yscale=1;
+ t->wscale=1;
+ }
+ det=(navit_float)t->m00*(navit_float)t->m11*(navit_float)t->m22+
+ (navit_float)t->m01*(navit_float)t->m12*(navit_float)t->m20+
+ (navit_float)t->m02*(navit_float)t->m10*(navit_float)t->m21-
+ (navit_float)t->m02*(navit_float)t->m11*(navit_float)t->m20-
+ (navit_float)t->m01*(navit_float)t->m10*(navit_float)t->m22-
+ (navit_float)t->m00*(navit_float)t->m12*(navit_float)t->m21;
+
+ t->im00=(t->m11*t->m22-t->m12*t->m21)/det;
+ t->im01=(t->m02*t->m21-t->m01*t->m22)/det;
+ t->im02=(t->m01*t->m12-t->m02*t->m11)/det;
+ t->im10=(t->m12*t->m20-t->m10*t->m22)/det;
+ t->im11=(t->m00*t->m22-t->m02*t->m20)/det;
+ t->im12=(t->m02*t->m10-t->m00*t->m12)/det;
+ t->im20=(t->m10*t->m21-t->m11*t->m20)/det;
+ t->im21=(t->m01*t->m20-t->m00*t->m21)/det;
+ t->im22=(t->m00*t->m11-t->m01*t->m10)/det;
+}
+
struct transformation *
transform_new(void)
{
struct transformation *this_;
this_=g_new0(struct transformation, 1);
-
+ transform_set_screen_dist(this_, 100);
+ this_->order_base=14;
+#if 0
+ this_->pitch=20;
+#endif
+#if 0
+ this_->roll=30;
+ this_->hog=1000;
+#endif
+ transform_setup_matrix(this_);
return this_;
}
-static const double gar2geo_units = 360.0/(1<<24);
-static const double geo2gar_units = 1/(360.0/(1<<24));
+int
+transform_get_hog(struct transformation *this_)
+{
+ return HOG(*this_);
+}
+
+void
+transform_set_hog(struct transformation *this_, int hog)
+{
+#ifdef ENABLE_ROLL
+ this_->hog=hog;
+#else
+ dbg(0,"not supported\n");
+#endif
+
+}
+
+int
+transform_get_attr(struct transformation *this_, enum attr_type type, struct attr *attr, struct attr_iter *iter)
+{
+ switch (type) {
+#ifdef ENABLE_ROLL
+ case attr_hog:
+ attr->u.num=this_->hog;
+ break;
+#endif
+ default:
+ return 0;
+ }
+ attr->type=type;
+ return 1;
+}
+
+int
+transform_set_attr(struct transformation *this_, struct attr *attr)
+{
+ switch (attr->type) {
+#ifdef ENABLE_ROLL
+ case attr_hog:
+ this_->hog=attr->u.num;
+ return 1;
+#endif
+ default:
+ return 0;
+ }
+}
+
+int
+transformation_get_order_base(struct transformation *this_)
+{
+ return this_->order_base;
+}
+
+void
+transform_set_order_base(struct transformation *this_, int order_base)
+{
+ this_->order_base=order_base;
+}
+
+
+struct transformation *
+transform_dup(struct transformation *t)
+{
+ struct transformation *ret=g_new0(struct transformation, 1);
+ *ret=*t;
+ return ret;
+}
+
+static const navit_float gar2geo_units = 360.0/(1<<24);
+static const navit_float geo2gar_units = 1/(360.0/(1<<24));
void
transform_to_geo(enum projection pro, struct coord *c, struct coord_geo *g)
{
+ int x,y,northern,zone;
switch (pro) {
case projection_mg:
g->lng=c->x/6371000.0/M_PI*180;
- g->lat=atan(exp(c->y/6371000.0))/M_PI*360-90;
+ g->lat=navit_atan(exp(c->y/6371000.0))/M_PI*360-90;
break;
case projection_garmin:
g->lng=c->x*gar2geo_units;
g->lat=c->y*gar2geo_units;
break;
+ case projection_utm:
+ x=c->x;
+ y=c->y;
+ northern=y >= 0;
+ if (!northern) {
+ y+=10000000;
+ }
+ zone=(x/1000000);
+ x=x%1000000;
+ transform_utm_to_geo(x, y, zone, northern, g);
+ break;
default:
break;
}
switch (pro) {
case projection_mg:
c->x=g->lng*6371000.0*M_PI/180;
- c->y=log(tan(M_PI_4+g->lat*M_PI/360))*6371000.0;
+ c->y=log(navit_tan(M_PI_4+g->lat*M_PI/360))*6371000.0;
break;
case projection_garmin:
c->x=g->lng*geo2gar_units;
}
void
-transform_geo_to_cart(struct coord_geo *geo, double a, double b, struct coord_geo_cart *cart)
+transform_geo_to_cart(struct coord_geo *geo, navit_float a, navit_float b, struct coord_geo_cart *cart)
{
- double n,ee=1-b*b/(a*a);
- n = a/sqrt(1-ee*sin(geo->lat)*sin(geo->lat));
- cart->x=n*cos(geo->lat)*cos(geo->lng);
- cart->y=n*cos(geo->lat)*sin(geo->lng);
- cart->z=n*(1-ee)*sin(geo->lat);
+ navit_float n,ee=1-b*b/(a*a);
+ n = a/sqrtf(1-ee*navit_sin(geo->lat)*navit_sin(geo->lat));
+ cart->x=n*navit_cos(geo->lat)*navit_cos(geo->lng);
+ cart->y=n*navit_cos(geo->lat)*navit_sin(geo->lng);
+ cart->z=n*(1-ee)*navit_sin(geo->lat);
}
void
-transform_cart_to_geo(struct coord_geo_cart *cart, double a, double b, struct coord_geo *geo)
+transform_cart_to_geo(struct coord_geo_cart *cart, navit_float a, navit_float b, struct coord_geo *geo)
{
- double lat,lati,n,ee=1-b*b/(a*a), lng = atan(cart->y/cart->x);
+ navit_float lat,lati,n,ee=1-b*b/(a*a), lng = navit_tan(cart->y/cart->x);
- lat = atan(cart->z / sqrt((cart->x * cart->x) + (cart->y * cart->y)));
+ lat = navit_tan(cart->z / navit_sqrt((cart->x * cart->x) + (cart->y * cart->y)));
do
{
lati = lat;
- n = a / sqrt(1-ee*sin(lat)*sin(lat));
- lat = atan((cart->z + ee * n * sin(lat)) / sqrt(cart->x * cart->x + cart->y * cart->y));
+ n = a / navit_sqrt(1-ee*navit_sin(lat)*navit_sin(lat));
+ lat = navit_atan((cart->z + ee * n * navit_sin(lat)) / navit_sqrt(cart->x * cart->x + cart->y * cart->y));
}
while (fabs(lat - lati) >= 0.000000000000001);
void
+transform_utm_to_geo(const double UTMEasting, const double UTMNorthing, int ZoneNumber, int NorthernHemisphere, struct coord_geo *geo)
+{
+//converts UTM coords to lat/long. Equations from USGS Bulletin 1532
+//East Longitudes are positive, West longitudes are negative.
+//North latitudes are positive, South latitudes are negative
+//Lat and Long are in decimal degrees.
+ //Written by Chuck Gantz- chuck.gantz@globalstar.com
+
+ double Lat, Long;
+ double k0 = 0.99960000000000004;
+ double a = 6378137;
+ double eccSquared = 0.0066943799999999998;
+ double eccPrimeSquared;
+ double e1 = (1-sqrt(1-eccSquared))/(1+sqrt(1-eccSquared));
+ double N1, T1, C1, R1, D, M;
+ double LongOrigin;
+ double mu, phi1, phi1Rad;
+ double x, y;
+ double rad2deg = 180/M_PI;
+
+ x = UTMEasting - 500000.0; //remove 500,000 meter offset for longitude
+ y = UTMNorthing;
+
+ if (!NorthernHemisphere) {
+ y -= 10000000.0;//remove 10,000,000 meter offset used for southern hemisphere
+ }
+
+ LongOrigin = (ZoneNumber - 1)*6 - 180 + 3; //+3 puts origin in middle of zone
+
+ eccPrimeSquared = (eccSquared)/(1-eccSquared);
+
+ M = y / k0;
+ mu = M/(a*(1-eccSquared/4-3*eccSquared*eccSquared/64-5*eccSquared*eccSquared*eccSquared/256));
+ phi1Rad = mu + (3*e1/2-27*e1*e1*e1/32)*sin(2*mu)
+ + (21*e1*e1/16-55*e1*e1*e1*e1/32)*sin(4*mu)
+ +(151*e1*e1*e1/96)*sin(6*mu);
+ phi1 = phi1Rad*rad2deg;
+
+ N1 = a/sqrt(1-eccSquared*sin(phi1Rad)*sin(phi1Rad));
+ T1 = tan(phi1Rad)*tan(phi1Rad);
+ C1 = eccPrimeSquared*cos(phi1Rad)*cos(phi1Rad);
+ R1 = a*(1-eccSquared)/pow(1-eccSquared*sin(phi1Rad)*sin(phi1Rad), 1.5);
+ D = x/(N1*k0);
+
+ Lat = phi1Rad - (N1*tan(phi1Rad)/R1)*(D*D/2-(5+3*T1+10*C1-4*C1*C1-9*eccPrimeSquared)*D*D*D*D/24
+ +(61+90*T1+298*C1+45*T1*T1-252*eccPrimeSquared-3*C1*C1)*D*D*D*D*D*D/720);
+ Lat = Lat * rad2deg;
+
+ Long = (D-(1+2*T1+C1)*D*D*D/6+(5-2*C1+28*T1-3*C1*C1+8*eccPrimeSquared+24*T1*T1)
+ *D*D*D*D*D/120)/cos(phi1Rad);
+ Long = LongOrigin + Long * rad2deg;
+
+ geo->lat=Lat;
+ geo->lng=Long;
+}
+
+void
transform_datum(struct coord_geo *from, enum map_datum from_datum, struct coord_geo *to, enum map_datum to_datum)
{
}
int
-transform(struct transformation *t, enum projection pro, struct coord *c, struct point *p, int count, int unique)
+transform(struct transformation *t, enum projection pro, struct coord *c, struct point *p, int count, int mindist, int width, int *width_return)
{
struct coord c1;
int xcn, ycn;
struct coord_geo g;
-#ifdef AVOID_FLOAT
- int xc,yc;
-#else
- double xc,yc;
-#endif
- int i,j = 0;
+ int xc, yc, zc=0, xco=0, yco=0, zco=0;
+ int xm,ym,zct;
+ int zlimit=t->znear;
+ int visible, visibleo=-1;
+ int i,j = 0,k=0;
+ dbg(1,"count=%d\n", count);
for (i=0; i < count; i++) {
if (pro == t->pro) {
xc=c[i].x;
xc=c1.x;
yc=c1.y;
}
+ if (i != 0 && i != count-1 && mindist) {
+ if (xc > c[k].x-mindist && xc < c[k].x+mindist && yc > c[k].y-mindist && yc < c[k].y+mindist &&
+ (c[i+1].x != c[0].x || c[i+1].y != c[0].y))
+ continue;
+ k=i;
+ }
+ xm=xc;
+ ym=yc;
// dbg(2,"0x%x, 0x%x - 0x%x,0x%x contains 0x%x,0x%x\n", t->r.lu.x, t->r.lu.y, t->r.rl.x, t->r.rl.y, c->x, c->y);
// ret=coord_rect_contains(&t->r, c);
xc-=t->map_center.x;
yc-=t->map_center.y;
- yc=-yc;
- if (t->angle) {
- xcn=xc*t->cos_val+yc*t->sin_val;
- ycn=-xc*t->sin_val+yc*t->cos_val;
- xc=xcn;
- yc=ycn;
- }
- xc=xc*16;
- yc=yc*16;
-#ifndef AVOID_FLOAT
- if (t->scale!=1) {
- xc=xc/(double)(t->scale);
- yc=yc/(double)(t->scale);
- }
+ xc >>= t->scale_shift;
+ yc >>= t->scale_shift;
+ xm=xc;
+ ym=yc;
+
+ xcn=xc*t->m00+yc*t->m01+HOG(*t)*t->m02;
+ ycn=xc*t->m10+yc*t->m11+HOG(*t)*t->m12;
+
+ if (t->ddd) {
+ zc=(xc*t->m20+yc*t->m21+HOG(*t)*t->m22);
+ zct=zc;
+ zc+=t->offz << POST_SHIFT;
+ dbg(1,"zc=%d\n", zc);
+ dbg(1,"zc(%d)=xc(%d)*m20(%d)+yc(%d)*m21(%d)\n", (xc*t->m20+yc*t->m21), xc, t->m20, yc, t->m21);
+ /* visibility */
+ visible=(zc < zlimit ? 0:1);
+ dbg(1,"visible=%d old %d\n", visible, visibleo);
+ if (visible != visibleo && visibleo != -1) {
+ dbg(1,"clipping (%d,%d,%d)-(%d,%d,%d) (%d,%d,%d)\n", xcn, ycn, zc, xco, yco, zco, xco-xcn, yco-ycn, zco-zc);
+ if (zco != zc) {
+ xcn=xcn+(long long)(xco-xcn)*(zlimit-zc)/(zco-zc);
+ ycn=ycn+(long long)(yco-ycn)*(zlimit-zc)/(zco-zc);
+ }
+ dbg(1,"result (%d,%d,%d) * %d / %d\n", xcn,ycn,zc,zlimit-zc,zco-zc);
+ zc=zlimit;
+ xco=xcn;
+ yco=ycn;
+ zco=zc;
+ if (visible)
+ i--;
+ visibleo=visible;
+ } else {
+ xco=xcn;
+ yco=ycn;
+ zco=zc;
+ visibleo=visible;
+ if (! visible)
+ continue;
+ }
+ dbg(1,"zc=%d\n", zc);
+ dbg(1,"xcn %d ycn %d\n", xcn, ycn);
+ dbg(1,"%d,%d %d\n",xc,yc,zc);
+#if 0
+ dbg(0,"%d/%d=%d %d/%d=%d\n",xcn,xc,xcn/xc,ycn,yc,ycn/yc);
+#endif
+#if 1
+ xc=(long long)xcn*t->xscale/zc;
+ yc=(long long)ycn*t->yscale/zc;
#else
- if (t->scale!=1) {
- xc=xc/t->scale;
- yc=yc/t->scale;
- }
+ xc=xcn/(1000+zc);
+ yc=ycn/(1000+zc);
+#endif
+#if 0
+ dbg(1,"%d,%d %d\n",xc,yc,zc);
#endif
- xc+=t->screen_center.x;
- yc+=t->screen_center.y;
- if (xc < -0x8000)
- xc=-0x8000;
- if (xc > 0x7fff) {
- xc=0x7fff;
+ } else {
+ xc=xcn;
+ yc=ycn;
+ xc>>=POST_SHIFT;
+ yc>>=POST_SHIFT;
}
- if (yc < -0x8000)
- yc=-0x8000;
- if (yc > 0x7fff)
- yc=0x7fff;
- if (j == 0 || !unique || p[j-1].x != xc || p[j-1].y != yc) {
- p[j].x=xc;
- p[j].y=yc;
- j++;
+ xc+=t->offx;
+ yc+=t->offy;
+ p[j].x=xc;
+ p[j].y=yc;
+ if (width_return) {
+ if (t->ddd)
+ width_return[j]=width*t->wscale/zc;
+ else
+ width_return[j]=width;
}
+ j++;
}
return j;
}
-void
-transform_reverse(struct transformation *t, struct point *p, struct coord *c)
+static void
+transform_apply_inverse_matrix(struct transformation *t, struct coord_geo_cart *in, struct coord_geo_cart *out)
+{
+ out->x=in->x*t->im00+in->y*t->im01+in->z*t->im02;
+ out->y=in->x*t->im10+in->y*t->im11+in->z*t->im12;
+ out->z=in->x*t->im20+in->y*t->im21+in->z*t->im22;
+}
+
+static int
+transform_zplane_intersection(struct coord_geo_cart *p1, struct coord_geo_cart *p2, navit_float z, struct coord_geo_cart *result)
+{
+ navit_float dividend=z-p1->z;
+ navit_float divisor=p2->z-p1->z;
+ navit_float q;
+ if (!divisor) {
+ if (dividend)
+ return 0; /* no intersection */
+ else
+ return 3; /* identical planes */
+ }
+ q=dividend/divisor;
+ result->x=p1->x+q*(p2->x-p1->x);
+ result->y=p1->y+q*(p2->y-p1->y);
+ result->z=z;
+ if (q >= 0 && q <= 1)
+ return 1; /* intersection within [p1,p2] */
+ return 2; /* intersection without [p1,p2] */
+}
+
+static void
+transform_screen_to_3d(struct transformation *t, struct point *p, navit_float z, struct coord_geo_cart *cg)
+{
+ double xc,yc;
+ double offz=t->offz << POST_SHIFT;
+ xc=p->x - t->offx;
+ yc=p->y - t->offy;
+ cg->x=xc*z/t->xscale;
+ cg->y=yc*z/t->yscale;
+ cg->z=z-offz;
+}
+
+static int
+transform_reverse_near_far(struct transformation *t, struct point *p, struct coord *c, int near, int far)
{
- int xc,yc;
- xc=p->x;
- yc=p->y;
- xc-=t->screen_center.x;
- yc-=t->screen_center.y;
- xc=xc*t->scale/16;
- yc=-yc*t->scale/16;
- if (t->angle) {
- int xcn, ycn;
- xcn=xc*t->cos_val+yc*t->sin_val;
- ycn=-xc*t->sin_val+yc*t->cos_val;
- xc=xcn;
- yc=ycn;
+ double xc,yc;
+ dbg(1,"%d,%d\n",p->x,p->y);
+ if (t->ddd) {
+ struct coord_geo_cart nearc,farc,nears,fars,intersection;
+ transform_screen_to_3d(t, p, near, &nearc);
+ transform_screen_to_3d(t, p, far, &farc);
+ transform_apply_inverse_matrix(t, &nearc, &nears);
+ transform_apply_inverse_matrix(t, &farc, &fars);
+ if (transform_zplane_intersection(&nears, &fars, HOG(*t), &intersection) != 1)
+ return 0;
+ xc=intersection.x;
+ yc=intersection.y;
+ } else {
+ double xcn,ycn;
+ xcn=p->x - t->offx;
+ ycn=p->y - t->offy;
+ xc=(xcn*t->im00+ycn*t->im01)*(1 << POST_SHIFT);
+ yc=(xcn*t->im10+ycn*t->im11)*(1 << POST_SHIFT);
}
- c->x=t->map_center.x+xc;
- c->y=t->map_center.y+yc;
+ c->x=xc*(1 << t->scale_shift)+t->map_center.x;
+ c->y=yc*(1 << t->scale_shift)+t->map_center.y;
+ return 1;
+}
+
+int
+transform_reverse(struct transformation *t, struct point *p, struct coord *c)
+{
+ return transform_reverse_near_far(t, p, c, t->znear, t->zfar);
}
enum projection
struct map_selection *ret,*curri,*curro;
struct coord_geo g;
- int i;
ret=map_selection_dup(this_->map_sel);
curri=this_->map_sel;
dbg(1,": - %f,%f\n", g.lat, g.lng);
}
dbg(1,"transform rect for %d is %d,%d - %d,%d\n", pro, curro->u.c_rect.lu.x, curro->u.c_rect.lu.y, curro->u.c_rect.rl.x, curro->u.c_rect.rl.y);
- for (i = 0 ; i < layer_end ; i++)
- curro->order[i]+=order;
+ curro->order+=order;
+ curro->u.c_rect.lu.x-=500;
+ curro->u.c_rect.lu.y+=500;
+ curro->u.c_rect.rl.x+=500;
+ curro->u.c_rect.rl.y-=500;
+ curro->range=item_range_all;
curri=curri->next;
curro=curro->next;
}
return &this_->map_center;
}
+struct coord *
+transform_get_center(struct transformation *this_)
+{
+ return &this_->map_center;
+}
+
+void
+transform_set_center(struct transformation *this_, struct coord *c)
+{
+ this_->map_center=*c;
+}
+
+
void
-transform_set_angle(struct transformation *t,int angle)
+transform_set_yaw(struct transformation *t,int yaw)
{
- t->angle=angle;
- t->cos_val=cos(M_PI*t->angle/180);
- t->sin_val=sin(M_PI*t->angle/180);
+ t->yaw=yaw;
+ transform_setup_matrix(t);
}
int
-transform_get_angle(struct transformation *this_,int angle)
+transform_get_yaw(struct transformation *this_)
+{
+ return this_->yaw;
+}
+
+void
+transform_set_pitch(struct transformation *this_,int pitch)
+{
+ this_->pitch=pitch;
+ transform_setup_matrix(this_);
+}
+int
+transform_get_pitch(struct transformation *this_)
+{
+ return this_->pitch;
+}
+
+void
+transform_set_roll(struct transformation *this_,int roll)
+{
+#ifdef ENABLE_ROLL
+ this_->roll=roll;
+ transform_setup_matrix(this_);
+#else
+ dbg(0,"not supported\n");
+#endif
+}
+
+int
+transform_get_roll(struct transformation *this_)
+{
+#ifdef ENABLE_ROLL
+ return this_->roll;
+#else
+ return 0;
+#endif
+}
+
+void
+transform_set_distance(struct transformation *this_,int distance)
+{
+ transform_set_screen_dist(this_, distance);
+ transform_setup_matrix(this_);
+}
+
+int
+transform_get_distance(struct transformation *this_)
+{
+ return this_->screen_dist;
+}
+
+void
+transform_set_scales(struct transformation *this_, int xscale, int yscale, int wscale)
{
- return this_->angle;
+ this_->xscale3d=xscale;
+ this_->yscale3d=yscale;
+ this_->wscale3d=wscale;
}
void
if (sel) {
t->screen_center.x=(sel->u.p_rect.rl.x-sel->u.p_rect.lu.x)/2;
t->screen_center.y=(sel->u.p_rect.rl.y-sel->u.p_rect.lu.y)/2;
+ transform_setup_matrix(t);
}
}
+void
+transform_set_screen_center(struct transformation *t, struct point *p)
+{
+ t->screen_center=*p;
+}
+
#if 0
void
transform_set_size(struct transformation *t, int width, int height)
}
void
-transform_setup(struct transformation *t, struct pcoord *c, int scale, int angle)
+transform_setup(struct transformation *t, struct pcoord *c, int scale, int yaw)
{
t->pro=c->pro;
t->map_center.x=c->x;
t->map_center.y=c->y;
- t->scale=scale;
- transform_set_angle(t, angle);
+ t->scale=scale/16.0;
+ transform_set_yaw(t, yaw);
}
#if 0
msm=g_new0(struct map_selection, 1);
*msm=*ms;
pr=&ms->u.p_rect;
- screen_pnt[0].x=pr->lu.x;
+ screen_pnt[0].x=pr->lu.x; /* left upper */
screen_pnt[0].y=pr->lu.y;
- screen_pnt[1].x=pr->rl.x;
+ screen_pnt[1].x=pr->rl.x; /* right upper */
screen_pnt[1].y=pr->lu.y;
- screen_pnt[2].x=pr->lu.x;
+ screen_pnt[2].x=pr->rl.x; /* right lower */
screen_pnt[2].y=pr->rl.y;
- screen_pnt[3].x=pr->rl.x;
+ screen_pnt[3].x=pr->lu.x; /* left lower */
screen_pnt[3].y=pr->rl.y;
- for (i = 0 ; i < 4 ; i++) {
- transform_reverse(t, &screen_pnt[i], &screen[i]);
+ if (t->ddd) {
+ struct coord_geo_cart tmp,cg[8];
+ struct coord c;
+ int valid=0;
+ char edgenodes[]={
+ 0,1,
+ 1,2,
+ 2,3,
+ 3,0,
+ 4,5,
+ 5,6,
+ 6,7,
+ 7,4,
+ 0,4,
+ 1,5,
+ 2,6,
+ 3,7};
+ for (i = 0 ; i < 8 ; i++) {
+ transform_screen_to_3d(t, &screen_pnt[i%4], (i >= 4 ? t->zfar:t->znear), &tmp);
+ transform_apply_inverse_matrix(t, &tmp, &cg[i]);
+ }
+ msm->u.c_rect.lu.x=0;
+ msm->u.c_rect.lu.y=0;
+ msm->u.c_rect.rl.x=0;
+ msm->u.c_rect.rl.y=0;
+ for (i = 0 ; i < 12 ; i++) {
+ if (transform_zplane_intersection(&cg[edgenodes[i*2]], &cg[edgenodes[i*2+1]], HOG(*t), &tmp) == 1) {
+ c.x=tmp.x*(1 << t->scale_shift)+t->map_center.x;
+ c.y=tmp.y*(1 << t->scale_shift)+t->map_center.y;
+ dbg(1,"intersection with edge %d at 0x%x,0x%x\n",i,c.x,c.y);
+ if (valid)
+ coord_rect_extend(&msm->u.c_rect, &c);
+ else {
+ msm->u.c_rect.lu=c;
+ msm->u.c_rect.rl=c;
+ valid=1;
+ }
+ dbg(1,"rect 0x%x,0x%x - 0x%x,0x%x\n",msm->u.c_rect.lu.x,msm->u.c_rect.lu.y,msm->u.c_rect.rl.x,msm->u.c_rect.rl.y);
+ }
+ }
+ } else {
+ for (i = 0 ; i < 4 ; i++) {
+ transform_reverse(t, &screen_pnt[i], &screen[i]);
+ dbg(1,"map(%d) %d,%d=0x%x,0x%x\n", i,screen_pnt[i].x, screen_pnt[i].y, screen[i].x, screen[i].y);
+ }
+ msm->u.c_rect.lu.x=min4(screen[0].x,screen[1].x,screen[2].x,screen[3].x);
+ msm->u.c_rect.rl.x=max4(screen[0].x,screen[1].x,screen[2].x,screen[3].x);
+ msm->u.c_rect.rl.y=min4(screen[0].y,screen[1].y,screen[2].y,screen[3].y);
+ msm->u.c_rect.lu.y=max4(screen[0].y,screen[1].y,screen[2].y,screen[3].y);
}
- msm->u.c_rect.lu.x=min4(screen[0].x,screen[1].x,screen[2].x,screen[3].x);
- msm->u.c_rect.rl.x=max4(screen[0].x,screen[1].x,screen[2].x,screen[3].x);
- msm->u.c_rect.rl.y=min4(screen[0].y,screen[1].y,screen[2].y,screen[3].y);
- msm->u.c_rect.lu.y=max4(screen[0].y,screen[1].y,screen[2].y,screen[3].y);
+ dbg(1,"%dx%d\n", msm->u.c_rect.rl.x-msm->u.c_rect.lu.x,
+ msm->u.c_rect.lu.y-msm->u.c_rect.rl.y);
*msm_last=msm;
msm_last=&msm->next;
ms=ms->next;
long
transform_get_scale(struct transformation *t)
{
- return t->scale;
+ return (int)(t->scale*16);
}
void
transform_set_scale(struct transformation *t, long scale)
{
- t->scale=scale;
+ t->scale=scale/16.0;
+ transform_setup_matrix(t);
}
int
transform_get_order(struct transformation *t)
{
- int scale=t->scale;
- int order=0;
- while (scale > 1) {
- order++;
- scale>>=1;
- }
- order=18-order;
- if (order < 0)
- order=0;
- return order;
+ dbg(1,"order %d\n", t->order);
+ return t->order;
}
-void
-transform_geo_text(struct coord_geo *g, char *buffer)
-{
- double lng=g->lng;
- double lat=g->lat;
- char lng_c='E';
- char lat_c='N';
-
- if (lng < 0) {
- lng=-lng;
- lng_c='W';
- }
- if (lat < 0) {
- lat=-lat;
- lat_c='S';
- }
-
- sprintf(buffer,"%02.0f%07.4f%c %03.0f%07.4f%c", floor(lat), fmod(lat*60,60), lat_c, floor(lng), fmod(lng*60,60), lng_c);
-
-}
#define TWOPI (M_PI*2)
#define GC2RAD(c) ((c) * TWOPI/(1<<24))
// static const int earth_radius = 3960; //miles
//Point 1 cords
- float lat1 = GC2RAD(c1->y);
- float long1 = GC2RAD(c1->x);
+ navit_float lat1 = GC2RAD(c1->y);
+ navit_float long1 = GC2RAD(c1->x);
//Point 2 cords
- float lat2 = GC2RAD(c2->y);
- float long2 = GC2RAD(c2->x);
+ navit_float lat2 = GC2RAD(c2->y);
+ navit_float long2 = GC2RAD(c2->x);
//Haversine Formula
- float dlong = long2-long1;
- float dlat = lat2-lat1;
+ navit_float dlong = long2-long1;
+ navit_float dlat = lat2-lat1;
- float sinlat = sinf(dlat/2);
- float sinlong = sinf(dlong/2);
+ navit_float sinlat = navit_sin(dlat/2);
+ navit_float sinlong = navit_sin(dlong/2);
- float a=(sinlat*sinlat)+cosf(lat1)*cosf(lat2)*(sinlong*sinlong);
- float c=2*asinf(minf(1,sqrt(a)));
+ navit_float a=(sinlat*sinlat)+navit_cos(lat1)*navit_cos(lat2)*(sinlong*sinlong);
+ navit_float c=2*navit_asin(minf(1,navit_sqrt(a)));
#ifdef AVOID_FLOAT
return round(earth_radius*c);
#else
#endif
#else
#define GMETER 2.3887499999999999
- double dx,dy;
+ navit_float dx,dy;
dx=c1->x-c2->x;
dy=c1->y-c2->y;
- return sqrt(dx*dx+dy*dy)*GMETER;
+ return navit_sqrt(dx*dx+dy*dy)*GMETER;
#undef GMETER
#endif
}
c.x=0;
c.y=y;
transform_to_geo(projection_mg, &c, &g);
- return 1/cos(g.lat/180*M_PI);
+ return 1/navit_cos(g.lat/180*M_PI);
}
#ifdef AVOID_FLOAT
static int
tab_sqrt[]={14142,13379,12806,12364,12018,11741,11517,11333,11180,11051,10943,10850,10770,10701,10640,10587,10540,10499,10462,10429,10400,10373,10349,10327,10307,10289,10273,10257,10243,10231,10219,10208};
+
+static int tab_int_step = 0x20000;
+static int tab_int_scale[]={10000,10002,10008,10019,10033,10052,10076,10103,10135,10171,10212,10257,10306,10359,10417,10479,10546,10617,10693,10773,10858,10947,11041,11140,11243,11352,11465,11582,11705,11833,11965,12103,12246,12394,12547,12706,12870,13039,13214,13395,13581,13773,13971,14174,14384,14600,14822,15050,15285,15526,15774,16028,16289,16557,16832,17114,17404,17700,18005,18316,18636,18964,19299,19643,19995,20355,20724,21102,21489,21885,22290,22705,23129,23563,24007,24461,24926,25401,25886,26383,26891};
+
+int transform_int_scale(int y)
+{
+ int a=tab_int_step,i,size = sizeof(tab_int_scale)/sizeof(int);
+ if (y < 0)
+ y=-y;
+ i=y/tab_int_step;
+ if (i < size-1)
+ return tab_int_scale[i]+((tab_int_scale[i+1]-tab_int_scale[i])*(y-i*tab_int_step))/tab_int_step;
+ return tab_int_scale[size-1];
+}
#endif
double
dy=c1->y-c2->y;
return sqrt(dx*dx+dy*dy)/scale;
#else
- int dx,dy,f,scale=15539;
+ int dx,dy,f,scale=transform_int_scale((c1->y+c2->y)/2);
dx=c1->x-c2->x;
dy=c1->y-c2->y;
if (dx < 0)
} else if (pro == projection_garmin) {
return transform_distance_garmin(c1, c2);
} else {
- printf("Unknown projection: %d\n", pro);
+ dbg(0,"Unknown projection: %d\n", pro);
return 0;
}
}
+void
+transform_project(enum projection pro, struct coord *c, int distance, int angle, struct coord *res)
+{
+ double scale;
+ switch (pro) {
+ case projection_mg:
+ scale=transform_scale(c->y);
+ res->x=c->x+distance*sin(angle*M_PI/180)*scale;
+ res->y=c->y+distance*cos(angle*M_PI/180)*scale;
+ break;
+ default:
+ dbg(0,"Unsupported projection: %d\n", pro);
+ return;
+ }
+
+}
+
+
+double
+transform_polyline_length(enum projection pro, struct coord *c, int count)
+{
+ double ret=0;
+ int i;
+
+ for (i = 0 ; i < count-1 ; i++)
+ ret+=transform_distance(pro, &c[i], &c[i+1]);
+ return ret;
+}
+
int
transform_distance_sq(struct coord *c1, struct coord *c2)
{
}
int
+transform_distance_sq_pc(struct pcoord *c1, struct pcoord *c2)
+{
+ struct coord p1,p2;
+ p1.x = c1->x; p1.y = c1->y;
+ p2.x = c2->x; p2.y = c2->y;
+ return transform_distance_sq(&p1, &p2);
+}
+
+int
transform_distance_line_sq(struct coord *l0, struct coord *l1, struct coord *ref, struct coord *lpnt)
{
int vx,vy,wx,wy;
return dist;
}
+int
+transform_douglas_peucker(struct coord *in, int count, int dist_sq, struct coord *out)
+{
+ int ret=0;
+ int i,d,dmax=0, idx=0;
+ for (i = 1; i < count-1 ; i++) {
+ d=transform_distance_line_sq(&in[0], &in[count-1], &in[i], NULL);
+ if (d > dmax) {
+ idx=i;
+ dmax=d;
+ }
+ }
+ if (dmax > dist_sq) {
+ ret=transform_douglas_peucker(in, idx+1, dist_sq, out)-1;
+ ret+=transform_douglas_peucker(in+idx, count-idx, dist_sq, out+ret);
+ } else {
+ if (count > 0)
+ out[ret++]=in[0];
+ if (count > 1)
+ out[ret++]=in[count-1];
+ }
+ return ret;
+}
+
void
transform_print_deg(double deg)
(ref->x < (c[j].x - c[i].x) * (ref->y - c[i].y) / (c[j].y - c[i].y) + c[i].x))
ci = !ci;
}
- if (! ci)
- return transform_within_dist_polyline(ref, c, count, dist, 1);
+ if (! ci) {
+ if (dist)
+ return transform_within_dist_polyline(ref, c, count, dist, 1);
+ else
+ return 0;
+ }
return 1;
}
return transform_within_dist_polygon(ref, c, count, dist);
}
+void
+transform_destroy(struct transformation *t)
+{
+ g_free(t);
+}
+
/*
Note: there are many mathematically equivalent ways to express these formulas. As usual, not all of them are computationally equivalent.