---- /dev/null 2012-04-29 08:55:34.366920721 +0200
-+++ kernel-power/drivers/power/bq2415x_charger.c 2012-04-29 17:53:57.799826239 +0200
-@@ -0,0 +1,1564 @@
+--- /dev/null
++++ kernel-power/drivers/power/bq2415x_charger.c
+@@ -0,0 +1,1572 @@
+/*
+ bq2415x_charger.c - bq2415x charger driver
+ Copyright (C) 2011-2012 Pali Rohár <pali.rohar@gmail.com>
+*/
+
+#include <linux/version.h>
++#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/err.h>
+ BQ24158,
+};
+
-+enum bq2415x_mode {
-+ BQ2415X_MODE_NONE,
-+ BQ2415X_MODE_HOST_CHARGER,
-+ BQ2415X_MODE_DEDICATED_CHARGER,
-+ BQ2415X_MODE_BOOST,
-+};
-+
+static char *bq2415x_chip_name[] = {
+ "unknown",
+ "bq24150",
+ struct bq2415x_platform_data init_data;
+ struct power_supply charger;
+ struct delayed_work work;
-+ enum bq2415x_mode charger_mode; /* mode reported by hook function */
-+ enum bq2415x_mode mode; /* actual setted mode */
++ enum bq2415x_mode reported_mode;/* mode reported by hook function */
++ enum bq2415x_mode mode; /* current configured mode */
+ enum bq2415x_chip chip;
+ char *model;
+ char *name;
+
+static int bq2415x_set_weak_battery_voltage(struct bq2415x_device *bq, int mV)
+{
-+ int val = mV/100 + (mV%100 > 0 ? 1 : 0) - 34;
-+
-+ if (val < 0)
++ /* round to 100mV */
++ int val;
++ if (mV <= 3400 + 50)
+ val = 0;
-+ else if (val > 3)
++ else if (mV <= 3500 + 50)
++ val = 1;
++ else if (mV <= 3600 + 50)
++ val = 2;
++ else
+ val = 3;
-+
+ return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
+ BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
+}
+static int bq2415x_set_battery_regulation_voltage(struct bq2415x_device *bq,
+ int mV)
+{
-+ int val = (mV/10 + (mV%10 > 0 ? 1 : 0) - 350) / 2;
++ int val = (mV/10 - 350) / 2;
+
+ if (val < 0)
+ val = 0;
-+ else if (val > 94) /* FIXME: Max is 94 or 122 ? */
++ else if (val > 94) /* FIXME: Max is 94 or 122 ? Set max value ? */
+ return -EINVAL;
+
+ return bq2415x_i2c_write_mask(bq, BQ2415X_REG_VOLTAGE, val,
+ if (bq->init_data.resistor_sense <= 0)
+ return -ENOSYS;
+
-+ val = (mA * bq->init_data.resistor_sense - 37400);
-+ val = val/6800 + (val%6800 > 0 ? 1 : 0);
++ val = (mA * bq->init_data.resistor_sense - 37400) / 6800;
+
+ if (val < 0)
+ val = 0;
+ if (bq->init_data.resistor_sense <= 0)
+ return -ENOSYS;
+
-+ val = (mA * bq->init_data.resistor_sense - 3400);
-+ val = val/3400 + (val%3400 > 0 ? 1 : 0);
++ val = (mA * bq->init_data.resistor_sense - 3400) / 3400;
+
+ if (val < 0)
+ val = 0;
+
+ switch (mode) {
+ case BQ2415X_MODE_NONE:
-+ dev_info(bq->dev, "mode: N/A\n");
++ dev_dbg(bq->dev, "changing mode to: N/A\n");
+ ret = bq2415x_set_current_limit(bq, 100);
+ break;
+ case BQ2415X_MODE_HOST_CHARGER:
-+ dev_info(bq->dev, "mode: Host/HUB charger\n");
++ dev_dbg(bq->dev, "changing mode to: Host/HUB charger\n");
+ ret = bq2415x_set_current_limit(bq, 500);
+ break;
+ case BQ2415X_MODE_DEDICATED_CHARGER:
-+ dev_info(bq->dev, "mode: Dedicated charger\n");
++ dev_dbg(bq->dev, "changing mode to: Dedicated charger\n");
+ ret = bq2415x_set_current_limit(bq, 1800);
+ break;
+ case BQ2415X_MODE_BOOST: /* Boost mode */
-+ dev_info(bq->dev, "mode: Boost\n");
++ dev_dbg(bq->dev, "changing mode to: Boost\n");
+ ret = bq2415x_set_current_limit(bq, 100);
+ break;
+ }
+ return ret;
+
+ bq->mode = mode;
++ sysfs_notify(&bq->charger.dev->kobj, NULL, "mode");
++
+ return 0;
+
+}
+
-+static void bq2415x_set_charger_type(int type, void *data)
++static void bq2415x_hook_function(enum bq2415x_mode mode, void *data)
+{
+ struct bq2415x_device *bq = data;
+
+ if (!bq)
+ return;
+
-+ switch (type) {
-+ case 0:
-+ bq->charger_mode = BQ2415X_MODE_NONE;
-+ break;
-+ case 1:
-+ bq->charger_mode = BQ2415X_MODE_HOST_CHARGER;
-+ break;
-+ case 2:
-+ bq->charger_mode = BQ2415X_MODE_DEDICATED_CHARGER;
-+ break;
-+ default:
-+ return;
-+ }
++ dev_dbg(bq->dev, "hook function was called\n");
++
++ bq->reported_mode = mode;
++ sysfs_notify(&bq->charger.dev->kobj, NULL, "reported_mode");
+
+ if (bq->automode < 1)
+ return;
+
-+ /* TODO: Detect USB Host mode */
-+
-+ bq2415x_set_mode(bq, bq->charger_mode);
++ bq2415x_set_mode(bq, bq->reported_mode);
+
+}
+
+
+ boost = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_STATUS);
+ if (boost < 0) {
-+ bq2415x_timer_error(bq, "Unknow error");
++ bq2415x_timer_error(bq, "Unknown error");
+ return;
+ }
+
+ error = bq2415x_exec_command(bq, BQ2415X_FAULT_STATUS);
+ if (error < 0) {
-+ bq2415x_timer_error(bq, "Unknow error");
++ bq2415x_timer_error(bq, "Unknown error");
+ return;
+ }
+
+ if (bq->automode < 0)
+ return -ENOSYS;
+ bq->automode = 1;
-+ mode = bq->charger_mode;
++ mode = bq->reported_mode;
+ } else if (strncmp(buf, "none", 4) == 0) {
+ if (bq->automode > 0)
+ bq->automode = 0;
+ return ret;
+}
+
++static ssize_t bq2415x_sysfs_show_reported_mode(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct power_supply *psy = dev_get_drvdata(dev);
++ struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
++ charger);
++
++ switch (bq->reported_mode) {
++ case BQ2415X_MODE_NONE:
++ return sprintf(buf, "none\n");
++ case BQ2415X_MODE_HOST_CHARGER:
++ return sprintf(buf, "host\n");
++ case BQ2415X_MODE_DEDICATED_CHARGER:
++ return sprintf(buf, "dedicated\n");
++ case BQ2415X_MODE_BOOST:
++ return sprintf(buf, "boost\n");
++ }
++
++ return -EINVAL;
++}
++
+static ssize_t bq2415x_sysfs_set_registers(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct bq2415x_device *bq = container_of(psy, struct bq2415x_device,
+ charger);
+ ssize_t ret = 0;
-+ char *end;
-+ int reg;
-+ int val;
++ unsigned int reg;
++ unsigned int val;
+
-+ reg = simple_strtol(buf, &end, 16);
-+ if (reg < 0 || reg > 4)
++ if (sscanf(buf, "%x %x", ®, &val) != 2)
+ return -EINVAL;
+
-+ val = simple_strtol(end+1, NULL, 16);
-+ if (val < 0 || val > 255)
++ if (reg > 4 || val > 255)
+ return -EINVAL;
+
+ ret = bq2415x_i2c_write(bq, reg, val);
+ long val;
+ int ret;
+
-+ if (strict_strtol(buf, 10, &val) < 0)
++ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ if (strcmp(attr->attr.name, "current_limit") == 0)
+ long val;
+ int ret;
+
-+ if (strict_strtol(buf, 10, &val) < 0)
++ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
+static DEVICE_ATTR(stat_pin_enable, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+
++static DEVICE_ATTR(reported_mode, S_IRUGO,
++ bq2415x_sysfs_show_reported_mode, NULL);
+static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_mode, bq2415x_sysfs_set_mode);
+static DEVICE_ATTR(timer, S_IWUSR | S_IRUGO,
+ &dev_attr_otg_pin_enable.attr,
+ &dev_attr_stat_pin_enable.attr,
+
++ &dev_attr_reported_mode.attr,
+ &dev_attr_mode.attr,
+ &dev_attr_timer.attr,
+
+ bq->chip = id->driver_data;
+ bq->name = name;
+ bq->mode = BQ2415X_MODE_NONE;
-+ bq->charger_mode = BQ2415X_MODE_NONE;
++ bq->reported_mode = BQ2415X_MODE_NONE;
+ bq->autotimer = 0;
+ bq->automode = 0;
+
+ goto error_5;
+ }
+
-+ if (bq->init_data.set_charger_type_hook) {
-+ if (bq->init_data.set_charger_type_hook(
-+ bq2415x_set_charger_type, bq)) {
++ if (bq->init_data.set_mode_hook) {
++ if (bq->init_data.set_mode_hook(
++ bq2415x_hook_function, bq)) {
+ bq->automode = 1;
++ bq2415x_set_mode(bq, bq->reported_mode);
+ dev_info(bq->dev, "automode enabled\n");
+ } else {
+ bq->automode = -1;
-+ dev_info(bq->dev, "automode not supported\n");
++ dev_info(bq->dev, "automode failed\n");
+ }
+ } else {
+ bq->automode = -1;
+{
+ struct bq2415x_device *bq = i2c_get_clientdata(client);
+
-+ if (bq->init_data.set_charger_type_hook)
-+ bq->init_data.set_charger_type_hook(NULL, NULL);
++ if (bq->init_data.set_mode_hook)
++ bq->init_data.set_mode_hook(NULL, NULL);
+
+ bq2415x_sysfs_exit(bq);
+ bq2415x_power_supply_exit(bq);
+MODULE_AUTHOR("Pali Rohár <pali.rohar@gmail.com>");
+MODULE_DESCRIPTION("bq2415x charger driver");
+MODULE_LICENSE("GPL");
---- /dev/null 2012-04-29 08:55:34.366920721 +0200
-+++ kernel-power/include/linux/power/bq2415x_charger.h 2012-01-27 15:47:45.689585447 +0100
-@@ -0,0 +1,78 @@
+--- /dev/null
++++ kernel-power/include/linux/power/bq2415x_charger.h
+@@ -0,0 +1,90 @@
+/*
+ bq2415x_charger.h - bq2415x charger driver
+ Copyright (C) 2011-2012 Pali Rohár <pali.rohar@gmail.com>
+#define BQ2415X_CHARGER_H
+
+/*
-+ This is platform data for bq2415x chip. It contains default board volatages
++ This is platform data for bq2415x chip. It contains default board voltages
+ and currents which can be also later configured via sysfs. If value is -1
+ then default chip value (specified in datasheet) will be used.
+
+ current. It it is less or equal to zero, configuring charge and termination
+ current will not be possible.
+
-+ Function set_charger_type_hook is needed for automode (setting correct
-+ current limit when charger is connected/disconnected). When is NULL,
++ Function set_mode_hook is needed for automode (setting correct current limit
++ when charger is connected/disconnected or setting boost mode). When is NULL,
+ automode function is disabled. When is not NULL, it must have this prototype:
+
-+ int (*set_charger_type_hook)(void (*hook)(int type, void *data), void *data)
++ int (*set_mode_hook)(
++ void (*hook)(enum bq2415x_mode mode, void *data),
++ void *data)
++
++ hook is hook function (see below) and data is pointer to driver private data
+
-+ and bq2415x driver will call it as:
++ bq2415x driver will call it as:
+
-+ platform_data->set_charger_type_hook(bq_hook_function, bq_private_data);
++ platform_data->set_mode_hook(bq2415x_hook_function, bq2415x_device);
+
-+ Board/platform function set_charger_type_hook return non zero when hook
++ Board/platform function set_mode_hook return non zero value when hook
+ function was successfull registred. Platform code should call that hook
+ function (which get from pointer, with data) every time when charger was
-+ connected/disconnected. bq driver then set correct current limit.
++ connected/disconnected or require to enable boost mode. bq2415x driver then
++ will set correct current limit, enable/disable charger or boost mode.
+
+ Hook function has this prototype:
+
-+ void hook(int type, void *data);
++ void hook(enum bq2415x_mode mode, void *data);
+
-+ type is:
-+ 0 - for unknown or none charger (max current limit is 100mA)
-+ 1 - for usb host/hub charger (max current limit is 500mA)
-+ 2 - for dedicated charger (unlimited)
-+
-+ data is pointer to bq_private_data (which get from set_charger_type_hook)
++ mode is bq2415x mode (charger or boost)
++ data is pointer to driver private data (which get from set_charger_type_hook)
+
+ When bq driver is being unloaded, it call function:
+
-+ platform_data->set_charger_type_hook(NULL, NULL);
++ platform_data->set_mode_hook(NULL, NULL);
++
++ (hook function and driver private data are NULL)
+
-+ After thet board/platform code must not call bq hook function! It is
-+ possible that pointer to hook function will not be valid.
++ After thet board/platform code must not call driver hook function! It is
++ possible that pointer to hook function will not be valid and calling will
++ cause undefined result.
+
+*/
+
++/* Supported modes with maximal current limit */
++enum bq2415x_mode {
++ BQ2415X_MODE_NONE, /* unknown or no charger (100mA) */
++ BQ2415X_MODE_HOST_CHARGER, /* usb host/hub charger (500mA) */
++ BQ2415X_MODE_DEDICATED_CHARGER, /* dedicated charger (unlimited) */
++ BQ2415X_MODE_BOOST, /* boost mode (charging disabled) */
++};
++
+struct bq2415x_platform_data {
+ int current_limit; /* mA */
+ int weak_battery_voltage; /* mV */
+ int charge_current; /* mA */
+ int termination_current; /* mA */
+ int resistor_sense; /* m ohm */
-+ int (*set_charger_type_hook)(void (*hook)(int type, void *data),
-+ void *data);
++ int (*set_mode_hook)(void (*hook)(enum bq2415x_mode mode, void *data),
++ void *data);
+};
+
+#endif