mips bios loading fix

[qemu] / hw / versatilepb.c

diff --git a/hw/versatilepb.c b/hw/versatilepb.c
index 6d2e2dc..e198a51 100644 (file)
--- a/hw/versatilepb.c
+++ b/hw/versatilepb.c
@@ -1,5 +1,5 @@
 /* 
- * ARM Versatile Platform Baseboard System emulation.
+ * ARM Versatile Platform/Application Baseboard System emulation.
  *
  * Copyright (c) 2005-2006 CodeSourcery.
  * Written by Paul Brook
@@ -10,10 +10,6 @@
 #include "vl.h"
 #include "arm_pic.h"
 
-#define KERNEL_ARGS_ADDR 0x100
-#define KERNEL_LOAD_ADDR 0x00010000
-#define INITRD_LOAD_ADDR 0x00800000
-
 /* Primary interrupt controller.  */
 
 typedef struct vpb_sic_state
@@ -151,66 +147,16 @@ static vpb_sic_state *vpb_sic_init(uint32_t base, void *parent, int irq)
 
 /* Board init.  */
 
-/* The worlds second smallest bootloader.  Set r0-r2, then jump to kernel.  */
-static uint32_t bootloader[] = {
-  0xe3a00000, /* mov     r0, #0 */
-  0xe3a01083, /* mov     r1, #0x83 */
-  0xe3811c01, /* orr     r1, r1, #0x100 */
-  0xe59f2000, /* ldr     r2, [pc, #0] */
-  0xe59ff000, /* ldr     pc, [pc, #0] */
-  0, /* Address of kernel args.  Set by integratorcp_init.  */
-  0  /* Kernel entry point.  Set by integratorcp_init.  */
-};
-
-static void set_kernel_args(uint32_t ram_size, int initrd_size,
-                            const char *kernel_cmdline)
-{
-    uint32_t *p;
-
-    p = (uint32_t *)(phys_ram_base + KERNEL_ARGS_ADDR);
-    /* ATAG_CORE */
-    stl_raw(p++, 5);
-    stl_raw(p++, 0x54410001);
-    stl_raw(p++, 1);
-    stl_raw(p++, 0x1000);
-    stl_raw(p++, 0);
-    /* ATAG_MEM */
-    stl_raw(p++, 4);
-    stl_raw(p++, 0x54410002);
-    stl_raw(p++, ram_size);
-    stl_raw(p++, 0);
-    if (initrd_size) {
-        /* ATAG_INITRD2 */
-        stl_raw(p++, 4);
-        stl_raw(p++, 0x54420005);
-        stl_raw(p++, INITRD_LOAD_ADDR);
-        stl_raw(p++, initrd_size);
-    }
-    if (kernel_cmdline && *kernel_cmdline) {
-        /* ATAG_CMDLINE */
-        int cmdline_size;
+/* The AB and PB boards both use the same core, just with different
+   peripherans and expansion busses.  For now we emulate a subset of the
+   PB peripherals and just change the board ID.  */
 
-        cmdline_size = strlen(kernel_cmdline);
-        memcpy (p + 2, kernel_cmdline, cmdline_size + 1);
-        cmdline_size = (cmdline_size >> 2) + 1;
-        stl_raw(p++, cmdline_size + 2);
-        stl_raw(p++, 0x54410009);
-        p += cmdline_size;
-    }
-    /* ATAG_END */
-    stl_raw(p++, 0);
-    stl_raw(p++, 0);
-}
-
-static void vpb_init(int ram_size, int vga_ram_size, int boot_device,
+static void versatile_init(int ram_size, int vga_ram_size, int boot_device,
                      DisplayState *ds, const char **fd_filename, int snapshot,
                      const char *kernel_filename, const char *kernel_cmdline,
-                     const char *initrd_filename)
+                     const char *initrd_filename, int board_id)
 {
     CPUState *env;
-    int kernel_size;
-    int initrd_size;
-    int n;
     void *pic;
     void *sic;
 
@@ -250,6 +196,7 @@ static void vpb_init(int ram_size, int vga_ram_size, int boot_device,
        that includes hardware cursor support from the PL111.  */
     pl110_init(ds, 0x10120000, pic, 16, 1);
 
+    /* Memory map for Versatile/PB:  */
     /* 0x10000000 System registers.  */
     /* 0x10001000 PCI controller config registers.  */
     /* 0x10002000 Serial bus interface.  */
@@ -285,33 +232,30 @@ static void vpb_init(int ram_size, int vga_ram_size, int boot_device,
     /*  0x101f3000 UART2.  */
     /* 0x101f4000 SSPI.  */
 
-    /* Load the kernel.  */
-    if (!kernel_filename) {
-        fprintf(stderr, "Kernel image must be specified\n");
-        exit(1);
-    }
-    kernel_size = load_image(kernel_filename,
-                             phys_ram_base + KERNEL_LOAD_ADDR);
-    if (kernel_size < 0) {
-        fprintf(stderr, "qemu: could not load kernel '%s'\n", kernel_filename);
-        exit(1);
-    }
-    if (initrd_filename) {
-        initrd_size = load_image(initrd_filename,
-                                 phys_ram_base + INITRD_LOAD_ADDR);
-        if (initrd_size < 0) {
-            fprintf(stderr, "qemu: could not load initrd '%s'\n",
-                    initrd_filename);
-            exit(1);
-        }
-    } else {
-        initrd_size = 0;
-    }
-    bootloader[5] = KERNEL_ARGS_ADDR;
-    bootloader[6] = KERNEL_LOAD_ADDR;
-    for (n = 0; n < sizeof(bootloader) / 4; n++)
-        stl_raw(phys_ram_base + (n * 4), bootloader[n]);
-    set_kernel_args(ram_size, initrd_size, kernel_cmdline);
+    arm_load_kernel(ram_size, kernel_filename, kernel_cmdline,
+                    initrd_filename, board_id);
+}
+
+static void vpb_init(int ram_size, int vga_ram_size, int boot_device,
+                     DisplayState *ds, const char **fd_filename, int snapshot,
+                     const char *kernel_filename, const char *kernel_cmdline,
+                     const char *initrd_filename)
+{
+    versatile_init(ram_size, vga_ram_size, boot_device,
+                   ds, fd_filename, snapshot,
+                   kernel_filename, kernel_cmdline,
+                   initrd_filename, 0x183);
+}
+
+static void vab_init(int ram_size, int vga_ram_size, int boot_device,
+                     DisplayState *ds, const char **fd_filename, int snapshot,
+                     const char *kernel_filename, const char *kernel_cmdline,
+                     const char *initrd_filename)
+{
+    versatile_init(ram_size, vga_ram_size, boot_device,
+                   ds, fd_filename, snapshot,
+                   kernel_filename, kernel_cmdline,
+                   initrd_filename, 0x25e);
 }
 
 QEMUMachine versatilepb_machine = {
@@ -319,3 +263,9 @@ QEMUMachine versatilepb_machine = {
     "ARM Versatile/PB (ARM926EJ-S)",
     vpb_init,
 };
+
+QEMUMachine versatileab_machine = {
+    "versatileab",
+    "ARM Versatile/AB (ARM926EJ-S)",
+    vab_init,
+};