* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
- *
+ *
* @(#) sh7750_regs.h,v 1.2.4.1 2003/09/04 18:46:00 joel Exp
*/
#ifndef __SH7750_REGS_H__
#define __SH7750_REGS_H__
-/*
- * All register has 2 addresses: in 0xff000000 - 0xffffffff (P4 address) and
+/*
+ * All register has 2 addresses: in 0xff000000 - 0xffffffff (P4 address) and
* in 0x1f000000 - 0x1fffffff (area 7 address)
*/
-#define SH7750_P4_BASE 0xff000000 /* Accessable only in
+#define SH7750_P4_BASE 0xff000000 /* Accessable only in
priveleged mode */
#define SH7750_A7_BASE 0x1f000000 /* Accessable only using TLB */
#define SH7750_P4_REG32(ofs) (SH7750_P4_BASE + (ofs))
#define SH7750_A7_REG32(ofs) (SH7750_A7_BASE + (ofs))
-/*
- * MMU Registers
+/*
+ * MMU Registers
*/
/* Page Table Entry High register - PTEH */
#define SH7750_PTEL_PR_RWPO 0x00000020 /* read-write in priv mode */
#define SH7750_PTEL_PR_ROPU 0x00000040 /* read-only in priv or user mode */
#define SH7750_PTEL_PR_RWPU 0x00000060 /* read-write in priv or user mode */
-#define SH7750_PTEL_C 0x00000008 /* Cacheability
+#define SH7750_PTEL_C 0x00000008 /* Cacheability
(0 - page not cacheable) */
-#define SH7750_PTEL_D 0x00000004 /* Dirty bit (1 - write has been
+#define SH7750_PTEL_D 0x00000004 /* Dirty bit (1 - write has been
performed to a page) */
#define SH7750_PTEL_SH 0x00000002 /* Share Status bit (1 - page are
shared by processes) */
#define SH7750_CCR_A7 SH7750_A7_REG32(SH7750_CCR_REGOFS)
#define SH7750_CCR_IIX 0x00008000 /* IC index enable bit */
-#define SH7750_CCR_ICI 0x00000800 /* IC invalidation bit:
+#define SH7750_CCR_ICI 0x00000800 /* IC invalidation bit:
set it to clear IC */
#define SH7750_CCR_ICE 0x00000100 /* IC enable bit */
#define SH7750_CCR_OIX 0x00000080 /* OC index enable bit */
-#define SH7750_CCR_ORA 0x00000020 /* OC RAM enable bit
- if you set OCE = 0,
+#define SH7750_CCR_ORA 0x00000020 /* OC RAM enable bit
+ if you set OCE = 0,
you should set ORA = 0 */
#define SH7750_CCR_OCI 0x00000008 /* OC invalidation bit */
#define SH7750_CCR_CB 0x00000004 /* Copy-back bit for P1 area */
/* Peripheral Module Interrupts - Memory Refresh Unit (REF) */
#define SH7750_EVT_REF_RCMI 0x580 /* Compare-match Interrupt */
-#define SH7750_EVT_REF_ROVI 0x5A0 /* Refresh Counter Overflow
+#define SH7750_EVT_REF_ROVI 0x5A0 /* Refresh Counter Overflow
interrupt */
/* Peripheral Module Interrupts - Hitachi User Debug Interface (H-UDI) */
#define SH7750_FRQCR SH7750_P4_REG32(SH7750_FRQCR_REGOFS)
#define SH7750_FRQCR_A7 SH7750_A7_REG32(SH7750_FRQCR_REGOFS)
-#define SH7750_FRQCR_CKOEN 0x0800 /* Clock Output Enable
+#define SH7750_FRQCR_CKOEN 0x0800 /* Clock Output Enable
0 - CKIO pin goes to HiZ/pullup
1 - Clock is output from CKIO */
#define SH7750_FRQCR_PLL1EN 0x0400 /* PLL circuit 1 enable */
year counters are stopped
1 - sec, min, hr, day-of-week, month,
year counters operate normally */
-
-
-/*
- * Timer Unit (TMU)
- */
-/* Timer Output Control Register (byte) - TOCR */
-#define SH7750_TOCR_REGOFS 0xD80000 /* offset */
-#define SH7750_TOCR SH7750_P4_REG32(SH7750_TOCR_REGOFS)
-#define SH7750_TOCR_A7 SH7750_A7_REG32(SH7750_TOCR_REGOFS)
-#define SH7750_TOCR_TCOE 0x01 /* Timer Clock Pin Control:
- 0 - TCLK is used as external clock
- input or input capture control
- 1 - TCLK is used as on-chip RTC
- output clock pin */
-
-/* Timer Start Register (byte) - TSTR */
-#define SH7750_TSTR_REGOFS 0xD80004 /* offset */
-#define SH7750_TSTR SH7750_P4_REG32(SH7750_TSTR_REGOFS)
-#define SH7750_TSTR_A7 SH7750_A7_REG32(SH7750_TSTR_REGOFS)
-#define SH7750_TSTR_STR2 0x04 /* TCNT2 performs count operations */
-#define SH7750_TSTR_STR1 0x02 /* TCNT1 performs count operations */
-#define SH7750_TSTR_STR0 0x01 /* TCNT0 performs count operations */
-#define SH7750_TSTR_STR(n) (1 << (n))
-
-/* Timer Constant Register - TCOR0, TCOR1, TCOR2 */
-#define SH7750_TCOR_REGOFS(n) (0xD80008 + ((n)*12)) /* offset */
-#define SH7750_TCOR(n) SH7750_P4_REG32(SH7750_TCOR_REGOFS(n))
-#define SH7750_TCOR_A7(n) SH7750_A7_REG32(SH7750_TCOR_REGOFS(n))
-#define SH7750_TCOR0 SH7750_TCOR(0)
-#define SH7750_TCOR1 SH7750_TCOR(1)
-#define SH7750_TCOR2 SH7750_TCOR(2)
-#define SH7750_TCOR0_A7 SH7750_TCOR_A7(0)
-#define SH7750_TCOR1_A7 SH7750_TCOR_A7(1)
-#define SH7750_TCOR2_A7 SH7750_TCOR_A7(2)
-
-/* Timer Counter Register - TCNT0, TCNT1, TCNT2 */
-#define SH7750_TCNT_REGOFS(n) (0xD8000C + ((n)*12)) /* offset */
-#define SH7750_TCNT(n) SH7750_P4_REG32(SH7750_TCNT_REGOFS(n))
-#define SH7750_TCNT_A7(n) SH7750_A7_REG32(SH7750_TCNT_REGOFS(n))
-#define SH7750_TCNT0 SH7750_TCNT(0)
-#define SH7750_TCNT1 SH7750_TCNT(1)
-#define SH7750_TCNT2 SH7750_TCNT(2)
-#define SH7750_TCNT0_A7 SH7750_TCNT_A7(0)
-#define SH7750_TCNT1_A7 SH7750_TCNT_A7(1)
-#define SH7750_TCNT2_A7 SH7750_TCNT_A7(2)
-
-/* Timer Control Register (half) - TCR0, TCR1, TCR2 */
-#define SH7750_TCR_REGOFS(n) (0xD80010 + ((n)*12)) /* offset */
-#define SH7750_TCR(n) SH7750_P4_REG32(SH7750_TCR_REGOFS(n))
-#define SH7750_TCR_A7(n) SH7750_A7_REG32(SH7750_TCR_REGOFS(n))
-#define SH7750_TCR0 SH7750_TCR(0)
-#define SH7750_TCR1 SH7750_TCR(1)
-#define SH7750_TCR2 SH7750_TCR(2)
-#define SH7750_TCR0_A7 SH7750_TCR_A7(0)
-#define SH7750_TCR1_A7 SH7750_TCR_A7(1)
-#define SH7750_TCR2_A7 SH7750_TCR_A7(2)
-
-#define SH7750_TCR2_ICPF 0x200 /* Input Capture Interrupt Flag
- (1 - input capture has occured) */
-#define SH7750_TCR_UNF 0x100 /* Underflow flag */
-#define SH7750_TCR2_ICPE 0x0C0 /* Input Capture Control: */
-#define SH7750_TCR2_ICPE_DIS 0x000 /* Input Capture function is not used */
-#define SH7750_TCR2_ICPE_NOINT 0x080 /* Input Capture function is used, but
- input capture interrupt is not
- enabled */
-#define SH7750_TCR2_ICPE_INT 0x0C0 /* Input Capture function is used,
- input capture interrupt enabled */
-#define SH7750_TCR_UNIE 0x020 /* Underflow Interrupt Control
- (1 - underflow interrupt enabled) */
-#define SH7750_TCR_CKEG 0x018 /* Clock Edge selection: */
-#define SH7750_TCR_CKEG_RAISE 0x000 /* Count/capture on rising edge */
-#define SH7750_TCR_CKEG_FALL 0x008 /* Count/capture on falling edge */
-#define SH7750_TCR_CKEG_BOTH 0x018 /* Count/capture on both rising and
- falling edges */
-#define SH7750_TCR_TPSC 0x007 /* Timer prescaler */
-#define SH7750_TCR_TPSC_DIV4 0x000 /* Counts on peripheral clock/4 */
-#define SH7750_TCR_TPSC_DIV16 0x001 /* Counts on peripheral clock/16 */
-#define SH7750_TCR_TPSC_DIV64 0x002 /* Counts on peripheral clock/64 */
-#define SH7750_TCR_TPSC_DIV256 0x003 /* Counts on peripheral clock/256 */
-#define SH7750_TCR_TPSC_DIV1024 0x004 /* Counts on peripheral clock/1024 */
-#define SH7750_TCR_TPSC_RTC 0x006 /* Counts on on-chip RTC output clk */
-#define SH7750_TCR_TPSC_EXT 0x007 /* Counts on external clock */
-
-/* Input Capture Register (read-only) - TCPR2 */
-#define SH7750_TCPR2_REGOFS 0xD8002C /* offset */
-#define SH7750_TCPR2 SH7750_P4_REG32(SH7750_TCPR2_REGOFS)
-#define SH7750_TCPR2_A7 SH7750_A7_REG32(SH7750_TCPR2_REGOFS)
-
/*
* Bus State Controller - BSC
*/
#define SH7750_BCR1_BREQEN 0x00080000 /* BREQ Enable:
0 - External requests are not
accepted
- 1 - External requests are
+ 1 - External requests are
accepted */
#define SH7750_BCR1_PSHR 0x00040000 /* Partial Sharing Bit:
0 - Master Mode
#define SH7750_MCR_TCAS_1 0x00000000 /* 1 */
#define SH7750_MCR_TCAS_2 0x00800000 /* 2 */
-#define SH7750_MCR_TPC 0x00380000 /* DRAM: RAS Precharge Period
+#define SH7750_MCR_TPC 0x00380000 /* DRAM: RAS Precharge Period
SDRAM: minimum number of cycles
until the next bank active cmd
is output after precharging */
#define SH7750_CHCR_DSA_AMEM16 0x0E000000 /* 16-bit attribute memory space */
#define SH7750_CHCR_DTC 0x01000000 /* Destination Address Wait Control
- Select, specifies CS5 or CS6
+ Select, specifies CS5 or CS6
space wait control for PCMCIA
access */
Address Mode (External Addr
Space -> External Device) */
#define SH7750_CHCR_RS_ER_SA_ED_TO_EA 0x300 /* External Request, Single
- Address Mode, (External
- Device -> External Addr
+ Address Mode, (External
+ Device -> External Addr
Space) */
#define SH7750_CHCR_RS_AR_EA_TO_EA 0x400 /* Auto-Request (External Addr
Space -> External Addr Space) */
#define SH7750_CHCR_RS_AR_EA_TO_OCP 0x500 /* Auto-Request (External Addr
Space -> On-chip Peripheral
Module) */
-#define SH7750_CHCR_RS_AR_OCP_TO_EA 0x600 /* Auto-Request (On-chip
+#define SH7750_CHCR_RS_AR_OCP_TO_EA 0x600 /* Auto-Request (On-chip
Peripheral Module ->
External Addr Space */
#define SH7750_CHCR_RS_SCITX_EA_TO_SC 0x800 /* SCI Transmit-Data-Empty intr
#define SH7750_DMAOR_DME 0x00000001 /* DMAC Master Enable */
/*
- * Serial Communication Interface - SCI
- * Serial Communication Interface with FIFO - SCIF
- */
-/* SCI Receive Data Register (byte, read-only) - SCRDR1, SCFRDR2 */
-#define SH7750_SCRDR_REGOFS(n) ((n) == 1 ? 0xE00014 : 0xE80014) /* offset */
-#define SH7750_SCRDR(n) SH7750_P4_REG32(SH7750_SCRDR_REGOFS(n))
-#define SH7750_SCRDR1 SH7750_SCRDR(1)
-#define SH7750_SCRDR2 SH7750_SCRDR(2)
-#define SH7750_SCRDR_A7(n) SH7750_A7_REG32(SH7750_SCRDR_REGOFS(n))
-#define SH7750_SCRDR1_A7 SH7750_SCRDR_A7(1)
-#define SH7750_SCRDR2_A7 SH7750_SCRDR_A7(2)
-
-/* SCI Transmit Data Register (byte) - SCTDR1, SCFTDR2 */
-#define SH7750_SCTDR_REGOFS(n) ((n) == 1 ? 0xE0000C : 0xE8000C) /* offset */
-#define SH7750_SCTDR(n) SH7750_P4_REG32(SH7750_SCTDR_REGOFS(n))
-#define SH7750_SCTDR1 SH7750_SCTDR(1)
-#define SH7750_SCTDR2 SH7750_SCTDR(2)
-#define SH7750_SCTDR_A7(n) SH7750_A7_REG32(SH7750_SCTDR_REGOFS(n))
-#define SH7750_SCTDR1_A7 SH7750_SCTDR_A7(1)
-#define SH7750_SCTDR2_A7 SH7750_SCTDR_A7(2)
-
-/* SCI Serial Mode Register - SCSMR1(byte), SCSMR2(half) */
-#define SH7750_SCSMR_REGOFS(n) ((n) == 1 ? 0xE00000 : 0xE80000) /* offset */
-#define SH7750_SCSMR(n) SH7750_P4_REG32(SH7750_SCSMR_REGOFS(n))
-#define SH7750_SCSMR1 SH7750_SCSMR(1)
-#define SH7750_SCSMR2 SH7750_SCSMR(2)
-#define SH7750_SCSMR_A7(n) SH7750_A7_REG32(SH7750_SCSMR_REGOFS(n))
-#define SH7750_SCSMR1_A7 SH7750_SCSMR_A7(1)
-#define SH7750_SCSMR2_A7 SH7750_SCSMR_A7(2)
-
-#define SH7750_SCSMR1_CA 0x80 /* Communication Mode (C/A\): */
-#define SH7750_SCSMR1_CA_ASYNC 0x00 /* Asynchronous Mode */
-#define SH7750_SCSMR1_CA_SYNC 0x80 /* Synchronous Mode */
-#define SH7750_SCSMR_CHR 0x40 /* Character Length: */
-#define SH7750_SCSMR_CHR_8 0x00 /* 8-bit data */
-#define SH7750_SCSMR_CHR_7 0x40 /* 7-bit data */
-#define SH7750_SCSMR_PE 0x20 /* Parity Enable */
-#define SH7750_SCSMR_PM 0x10 /* Parity Mode: */
-#define SH7750_SCSMR_PM_EVEN 0x00 /* Even Parity */
-#define SH7750_SCSMR_PM_ODD 0x10 /* Odd Parity */
-#define SH7750_SCSMR_STOP 0x08 /* Stop Bit Length: */
-#define SH7750_SCSMR_STOP_1 0x00 /* 1 stop bit */
-#define SH7750_SCSMR_STOP_2 0x08 /* 2 stop bit */
-#define SH7750_SCSMR1_MP 0x04 /* Multiprocessor Mode */
-#define SH7750_SCSMR_CKS 0x03 /* Clock Select */
-#define SH7750_SCSMR_CKS_S 0
-#define SH7750_SCSMR_CKS_DIV1 0x00 /* Periph clock */
-#define SH7750_SCSMR_CKS_DIV4 0x01 /* Periph clock / 4 */
-#define SH7750_SCSMR_CKS_DIV16 0x02 /* Periph clock / 16 */
-#define SH7750_SCSMR_CKS_DIV64 0x03 /* Periph clock / 64 */
-
-/* SCI Serial Control Register - SCSCR1(byte), SCSCR2(half) */
-#define SH7750_SCSCR_REGOFS(n) ((n) == 1 ? 0xE00008 : 0xE80008) /* offset */
-#define SH7750_SCSCR(n) SH7750_P4_REG32(SH7750_SCSCR_REGOFS(n))
-#define SH7750_SCSCR1 SH7750_SCSCR(1)
-#define SH7750_SCSCR2 SH7750_SCSCR(2)
-#define SH7750_SCSCR_A7(n) SH7750_A7_REG32(SH7750_SCSCR_REGOFS(n))
-#define SH7750_SCSCR1_A7 SH7750_SCSCR_A7(1)
-#define SH7750_SCSCR2_A7 SH7750_SCSCR_A7(2)
-
-#define SH7750_SCSCR_TIE 0x80 /* Transmit Interrupt Enable */
-#define SH7750_SCSCR_RIE 0x40 /* Receive Interrupt Enable */
-#define SH7750_SCSCR_TE 0x20 /* Transmit Enable */
-#define SH7750_SCSCR_RE 0x10 /* Receive Enable */
-#define SH7750_SCSCR1_MPIE 0x08 /* Multiprocessor Interrupt Enable */
-#define SH7750_SCSCR2_REIE 0x08 /* Receive Error Interrupt Enable */
-#define SH7750_SCSCR1_TEIE 0x04 /* Transmit End Interrupt Enable */
-#define SH7750_SCSCR1_CKE 0x03 /* Clock Enable: */
-#define SH7750_SCSCR_CKE_INTCLK 0x00 /* Use Internal Clock */
-#define SH7750_SCSCR_CKE_EXTCLK 0x02 /* Use External Clock from SCK */
-#define SH7750_SCSCR1_CKE_ASYNC_SCK_CLKOUT 0x01 /* Use SCK as a clock output
- in asynchronous mode */
-
-/* SCI Serial Status Register - SCSSR1(byte), SCSFR2(half) */
-#define SH7750_SCSSR_REGOFS(n) ((n) == 1 ? 0xE00010 : 0xE80010) /* offset */
-#define SH7750_SCSSR(n) SH7750_P4_REG32(SH7750_SCSSR_REGOFS(n))
-#define SH7750_SCSSR1 SH7750_SCSSR(1)
-#define SH7750_SCSFR2 SH7750_SCSSR(2)
-#define SH7750_SCSSR_A7(n) SH7750_A7_REG32(SH7750_SCSSR_REGOFS(n))
-#define SH7750_SCSSR1_A7 SH7750_SCSSR_A7(1)
-#define SH7750_SCSFR2_A7 SH7750_SCSSR_A7(2)
-
-#define SH7750_SCSSR1_TDRE 0x80 /* Transmit Data Register Empty */
-#define SH7750_SCSSR1_RDRF 0x40 /* Receive Data Register Full */
-#define SH7750_SCSSR1_ORER 0x20 /* Overrun Error */
-#define SH7750_SCSSR1_FER 0x10 /* Framing Error */
-#define SH7750_SCSSR1_PER 0x08 /* Parity Error */
-#define SH7750_SCSSR1_TEND 0x04 /* Transmit End */
-#define SH7750_SCSSR1_MPB 0x02 /* Multiprocessor Bit */
-#define SH7750_SCSSR1_MPBT 0x01 /* Multiprocessor Bit Transfer */
-
-#define SH7750_SCFSR2_PERN 0xF000 /* Number of Parity Errors */
-#define SH7750_SCFSR2_PERN_S 12
-#define SH7750_SCFSR2_FERN 0x0F00 /* Number of Framing Errors */
-#define SH7750_SCFSR2_FERN_S 8
-#define SH7750_SCFSR2_ER 0x0080 /* Receive Error */
-#define SH7750_SCFSR2_TEND 0x0040 /* Transmit End */
-#define SH7750_SCFSR2_TDFE 0x0020 /* Transmit FIFO Data Empty */
-#define SH7750_SCFSR2_BRK 0x0010 /* Break Detect */
-#define SH7750_SCFSR2_FER 0x0008 /* Framing Error */
-#define SH7750_SCFSR2_PER 0x0004 /* Parity Error */
-#define SH7750_SCFSR2_RDF 0x0002 /* Receive FIFO Data Full */
-#define SH7750_SCFSR2_DR 0x0001 /* Receive Data Ready */
-
-/* SCI Serial Port Register - SCSPTR1(byte) */
-#define SH7750_SCSPTR1_REGOFS 0xE0001C /* offset */
-#define SH7750_SCSPTR1 SH7750_P4_REG32(SH7750_SCSPTR1_REGOFS)
-#define SH7750_SCSPTR1_A7 SH7750_A7_REG32(SH7750_SCSPTR1_REGOFS)
-
-#define SH7750_SCSPTR1_EIO 0x80 /* Error Interrupt Only */
-#define SH7750_SCSPTR1_SPB1IO 0x08 /* 1: Output SPB1DT bit to SCK pin */
-#define SH7750_SCSPTR1_SPB1DT 0x04 /* Serial Port Clock Port Data */
-#define SH7750_SCSPTR1_SPB0IO 0x02 /* 1: Output SPB0DT bit to TxD pin */
-#define SH7750_SCSPTR1_SPB0DT 0x01 /* Serial Port Break Data */
-
-/* SCIF Serial Port Register - SCSPTR2(half) */
-#define SH7750_SCSPTR2_REGOFS 0xE80020 /* offset */
-#define SH7750_SCSPTR2 SH7750_P4_REG32(SH7750_SCSPTR2_REGOFS)
-#define SH7750_SCSPTR2_A7 SH7750_A7_REG32(SH7750_SCSPTR2_REGOFS)
-
-#define SH7750_SCSPTR2_RTSIO 0x80 /* 1: Output RTSDT bit to RTS2\ pin */
-#define SH7750_SCSPTR2_RTSDT 0x40 /* RTS Port Data */
-#define SH7750_SCSPTR2_CTSIO 0x20 /* 1: Output CTSDT bit to CTS2\ pin */
-#define SH7750_SCSPTR2_CTSDT 0x10 /* CTS Port Data */
-#define SH7750_SCSPTR2_SPB2IO 0x02 /* 1: Output SPBDT bit to TxD2 pin */
-#define SH7750_SCSPTR2_SPB2DT 0x01 /* Serial Port Break Data */
-
-/* SCI Bit Rate Register - SCBRR1(byte), SCBRR2(byte) */
-#define SH7750_SCBRR_REGOFS(n) ((n) == 1 ? 0xE00004 : 0xE80004) /* offset */
-#define SH7750_SCBRR(n) SH7750_P4_REG32(SH7750_SCBRR_REGOFS(n))
-#define SH7750_SCBRR1 SH7750_SCBRR_P4(1)
-#define SH7750_SCBRR2 SH7750_SCBRR_P4(2)
-#define SH7750_SCBRR_A7(n) SH7750_A7_REG32(SH7750_SCBRR_REGOFS(n))
-#define SH7750_SCBRR1_A7 SH7750_SCBRR_A7(1)
-#define SH7750_SCBRR2_A7 SH7750_SCBRR_A7(2)
-
-/* SCIF FIFO Control Register - SCFCR2(half) */
-#define SH7750_SCFCR2_REGOFS 0xE80018 /* offset */
-#define SH7750_SCFCR2 SH7750_P4_REG32(SH7750_SCFCR2_REGOFS)
-#define SH7750_SCFCR2_A7 SH7750_A7_REG32(SH7750_SCFCR2_REGOFS)
-
-#define SH7750_SCFCR2_RSTRG 0x700 /* RTS2\ Output Active Trigger; RTS2\
- signal goes to high level when the
- number of received data stored in
- FIFO exceeds the trigger number */
-#define SH7750_SCFCR2_RSTRG_15 0x000 /* 15 bytes */
-#define SH7750_SCFCR2_RSTRG_1 0x000 /* 1 byte */
-#define SH7750_SCFCR2_RSTRG_4 0x000 /* 4 bytes */
-#define SH7750_SCFCR2_RSTRG_6 0x000 /* 6 bytes */
-#define SH7750_SCFCR2_RSTRG_8 0x000 /* 8 bytes */
-#define SH7750_SCFCR2_RSTRG_10 0x000 /* 10 bytes */
-#define SH7750_SCFCR2_RSTRG_14 0x000 /* 14 bytes */
-
-#define SH7750_SCFCR2_RTRG 0x0C0 /* Receive FIFO Data Number Trigger,
- Receive Data Full (RDF) Flag sets
- when number of receive data bytes is
- equal or greater than the trigger
- number */
-#define SH7750_SCFCR2_RTRG_1 0x000 /* 1 byte */
-#define SH7750_SCFCR2_RTRG_4 0x040 /* 4 bytes */
-#define SH7750_SCFCR2_RTRG_8 0x080 /* 8 bytes */
-#define SH7750_SCFCR2_RTRG_14 0x0C0 /* 14 bytes */
-
-#define SH7750_SCFCR2_TTRG 0x030 /* Transmit FIFO Data Number Trigger,
- Transmit FIFO Data Register Empty (TDFE)
- flag sets when the number of remaining
- transmit data bytes is equal or less
- than the trigger number */
-#define SH7750_SCFCR2_TTRG_8 0x000 /* 8 bytes */
-#define SH7750_SCFCR2_TTRG_4 0x010 /* 4 bytes */
-#define SH7750_SCFCR2_TTRG_2 0x020 /* 2 bytes */
-#define SH7750_SCFCR2_TTRG_1 0x030 /* 1 byte */
-
-#define SH7750_SCFCR2_MCE 0x008 /* Modem Control Enable */
-#define SH7750_SCFCR2_TFRST 0x004 /* Transmit FIFO Data Register Reset,
- invalidates the transmit data in the
- transmit FIFO */
-#define SH7750_SCFCR2_RFRST 0x002 /* Receive FIFO Data Register Reset,
- invalidates the receive data in the
- receive FIFO data register and resets
- it to the empty state */
-#define SH7750_SCFCR2_LOOP 0x001 /* Loopback Test */
-
-/* SCIF FIFO Data Count Register - SCFDR2(half, read-only) */
-#define SH7750_SCFDR2_REGOFS 0xE8001C /* offset */
-#define SH7750_SCFDR2 SH7750_P4_REG32(SH7750_SCFDR2_REGOFS)
-#define SH7750_SCFDR2_A7 SH7750_A7_REG32(SH7750_SCFDR2_REGOFS)
-
-#define SH7750_SCFDR2_T 0x1F00 /* Number of untransmitted data bytes
- in transmit FIFO */
-#define SH7750_SCFDR2_T_S 8
-#define SH7750_SCFDR2_R 0x001F /* Number of received data bytes in
- receive FIFO */
-#define SH7750_SCFDR2_R_S 0
-
-/* SCIF Line Status Register - SCLSR2(half, read-only) */
-#define SH7750_SCLSR2_REGOFS 0xE80024 /* offset */
-#define SH7750_SCLSR2 SH7750_P4_REG32(SH7750_SCLSR2_REGOFS)
-#define SH7750_SCLSR2_A7 SH7750_A7_REG32(SH7750_SCLSR2_REGOFS)
-
-#define SH7750_SCLSR2_ORER 0x0001 /* Overrun Error */
-
-/*
- * SCI-based Smart Card Interface
- */
-/* Smart Card Mode Register - SCSCMR1(byte) */
-#define SH7750_SCSCMR1_REGOFS 0xE00018 /* offset */
-#define SH7750_SCSCMR1 SH7750_P4_REG32(SH7750_SCSCMR1_REGOFS)
-#define SH7750_SCSCMR1_A7 SH7750_A7_REG32(SH7750_SCSCMR1_REGOFS)
-
-#define SH7750_SCSCMR1_SDIR 0x08 /* Smart Card Data Transfer Direction: */
-#define SH7750_SCSCMR1_SDIR_LSBF 0x00 /* LSB-first */
-#define SH7750_SCSCMR1_SDIR_MSBF 0x08 /* MSB-first */
-
-#define SH7750_SCSCMR1_SINV 0x04 /* Smart Card Data Inversion */
-#define SH7750_SCSCMR1_SMIF 0x01 /* Smart Card Interface Mode Select */
-
-/* Smart-card specific bits in other registers */
-/* SCSMR1: */
-#define SH7750_SCSMR1_GSM 0x80 /* GSM mode select */
-
-/* SCSSR1: */
-#define SH7750_SCSSR1_ERS 0x10 /* Error Signal Status */
-
-/*
* I/O Ports
*/
/* Port Control Register A - PCTRA */
#define SH7750_ICR_IRLM_RAW 0x0080 /* IRL\ pins used as a four independent
interrupt requests */
-/* Interrupt Priority Register A - IPRA (half) */
-#define SH7750_IPRA_REGOFS 0xD00004 /* offset */
-#define SH7750_IPRA SH7750_P4_REG32(SH7750_IPRA_REGOFS)
-#define SH7750_IPRA_A7 SH7750_A7_REG32(SH7750_IPRA_REGOFS)
-
-#define SH7750_IPRA_TMU0 0xF000 /* TMU0 interrupt priority */
-#define SH7750_IPRA_TMU0_S 12
-#define SH7750_IPRA_TMU1 0x0F00 /* TMU1 interrupt priority */
-#define SH7750_IPRA_TMU1_S 8
-#define SH7750_IPRA_TMU2 0x00F0 /* TMU2 interrupt priority */
-#define SH7750_IPRA_TMU2_S 4
-#define SH7750_IPRA_RTC 0x000F /* RTC interrupt priority */
-#define SH7750_IPRA_RTC_S 0
-
-/* Interrupt Priority Register B - IPRB (half) */
-#define SH7750_IPRB_REGOFS 0xD00008 /* offset */
-#define SH7750_IPRB SH7750_P4_REG32(SH7750_IPRB_REGOFS)
-#define SH7750_IPRB_A7 SH7750_A7_REG32(SH7750_IPRB_REGOFS)
-
-#define SH7750_IPRB_WDT 0xF000 /* WDT interrupt priority */
-#define SH7750_IPRB_WDT_S 12
-#define SH7750_IPRB_REF 0x0F00 /* Memory Refresh unit interrupt
- priority */
-#define SH7750_IPRB_REF_S 8
-#define SH7750_IPRB_SCI1 0x00F0 /* SCI1 interrupt priority */
-#define SH7750_IPRB_SCI1_S 4
-
-/* Interrupt Priority Register ó - IPRó (half) */
-#define SH7750_IPRC_REGOFS 0xD00004 /* offset */
-#define SH7750_IPRC SH7750_P4_REG32(SH7750_IPRC_REGOFS)
-#define SH7750_IPRC_A7 SH7750_A7_REG32(SH7750_IPRC_REGOFS)
-
-#define SH7750_IPRC_GPIO 0xF000 /* GPIO interrupt priority */
-#define SH7750_IPRC_GPIO_S 12
-#define SH7750_IPRC_DMAC 0x0F00 /* DMAC interrupt priority */
-#define SH7750_IPRC_DMAC_S 8
-#define SH7750_IPRC_SCIF 0x00F0 /* SCIF interrupt priority */
-#define SH7750_IPRC_SCIF_S 4
-#define SH7750_IPRC_HUDI 0x000F /* H-UDI interrupt priority */
-#define SH7750_IPRC_HUDI_S 0
-
-
-/*
+/*
* User Break Controller registers
*/
#define SH7750_BARA 0x200000 /* Break address regiser A */
projects / qemu / blobdiff