uint32_t ret;
uint8_t *p;
- DPRINTF("%s: offset %08x\n", __func__, offset);
+ DPRINTF("%s: offset " TARGET_FMT_lx "\n", __func__, offset);
ret = -1;
offset -= pfl->base;
boff = offset & 0xFF;
#else
ret = p[offset];
ret |= p[offset + 1] << 8;
- ret |= p[offset + 1] << 8;
ret |= p[offset + 2] << 16;
ret |= p[offset + 3] << 24;
#endif
default:
goto flash_read;
}
- DPRINTF("%s: ID %d %x\n", __func__, boff, ret);
+ DPRINTF("%s: ID " TARGET_FMT_ld " %x\n", __func__, boff, ret);
break;
case 0xA0:
case 0x10:
offset -= pfl->base;
cmd = value;
- DPRINTF("%s: offset %08x %08x %d\n", __func__, offset, value, width);
+ DPRINTF("%s: offset " TARGET_FMT_lx " %08x %d\n", __func__,
+ offset, value, width);
if (pfl->cmd != 0xA0 && cmd == 0xF0) {
DPRINTF("%s: flash reset asked (%02x %02x)\n",
__func__, pfl->cmd, cmd);
return;
}
if (boff != 0x555 || cmd != 0xAA) {
- DPRINTF("%s: unlock0 failed %04x %02x %04x\n",
+ DPRINTF("%s: unlock0 failed " TARGET_FMT_lx " %02x %04x\n",
__func__, boff, cmd, 0x555);
goto reset_flash;
}
/* We started an unlock sequence */
check_unlock1:
if (boff != 0x2AA || cmd != 0x55) {
- DPRINTF("%s: unlock1 failed %04x %02x\n", __func__, boff, cmd);
+ DPRINTF("%s: unlock1 failed " TARGET_FMT_lx " %02x\n", __func__,
+ boff, cmd);
goto reset_flash;
}
DPRINTF("%s: unlock sequence done\n", __func__);
case 2:
/* We finished an unlock sequence */
if (!pfl->bypass && boff != 0x555) {
- DPRINTF("%s: command failed %04x %02x\n", __func__, boff, cmd);
+ DPRINTF("%s: command failed " TARGET_FMT_lx " %02x\n", __func__,
+ boff, cmd);
goto reset_flash;
}
switch (cmd) {
/* We need another unlock sequence */
goto check_unlock0;
case 0xA0:
- DPRINTF("%s: write data offset %08x %08x %d\n",
+ DPRINTF("%s: write data offset " TARGET_FMT_lx " %08x %d\n",
__func__, offset, value, width);
p = pfl->storage;
switch (width) {
switch (cmd) {
case 0x10:
if (boff != 0x555) {
- DPRINTF("%s: chip erase: invalid address %04x\n",
+ DPRINTF("%s: chip erase: invalid address " TARGET_FMT_lx "\n",
__func__, offset);
goto reset_flash;
}
/* Sector erase */
p = pfl->storage;
offset &= ~(pfl->sector_len - 1);
- DPRINTF("%s: start sector erase at %08x\n", __func__, offset);
+ DPRINTF("%s: start sector erase at " TARGET_FMT_lx "\n", __func__,
+ offset);
memset(p + offset, 0xFF, pfl->sector_len);
pflash_update(pfl, offset, pfl->sector_len);
pfl->status = 0x00;