/*
* ACPI implementation
- *
+ *
* Copyright (c) 2006 Fabrice Bellard
- *
+ *
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2 as published by the Free Software Foundation.
#define PM_FREQ 3579545
#define ACPI_DBG_IO_ADDR 0xb044
-#define SMB_IO_BASE 0xb100
typedef struct PIIX4PMState {
PCIDevice dev;
#define SUS_EN (1 << 13)
+#define ACPI_ENABLE 0xf1
+#define ACPI_DISABLE 0xf0
+
#define SMBHSTSTS 0x00
#define SMBHSTCNT 0x02
#define SMBHSTCMD 0x03
{
int sci_level, pmsts;
int64_t expire_time;
-
+
pmsts = get_pmsts(s);
- sci_level = (((pmsts & s->pmen) &
+ sci_level = (((pmsts & s->pmen) &
(RTC_EN | PWRBTN_EN | GBL_EN | TMROF_EN)) != 0);
qemu_set_irq(s->dev.irq[0], sci_level);
/* schedule a timer interruption if needed */
#endif
if (addr == 0) {
s->apmc = val;
+
+ /* ACPI specs 3.0, 4.7.2.5 */
+ if (val == ACPI_ENABLE) {
+ s->pmcntrl |= SCI_EN;
+ } else if (val == ACPI_DISABLE) {
+ s->pmcntrl &= ~SCI_EN;
+ }
+
if (s->dev.config[0x5b] & (1 << 1)) {
cpu_interrupt(first_cpu, CPU_INTERRUPT_SMI);
}
{
PIIX4PMState *s = opaque;
uint32_t val;
-
+
addr &= 1;
if (addr == 0) {
val = s->apmc;
if (s->dev.config[0x80] & 1) {
pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
- pm_io_base &= 0xfffe;
+ pm_io_base &= 0xffc0;
/* XXX: need to improve memory and ioport allocation */
#if defined(DEBUG)
}
}
-static void pm_write_config(PCIDevice *d,
+static void pm_write_config(PCIDevice *d,
uint32_t address, uint32_t val, int len)
{
pci_default_write_config(d, address, val, len);
return 0;
}
-i2c_bus *piix4_pm_init(PCIBus *bus, int devfn)
+i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base)
{
PIIX4PMState *s;
uint8_t *pci_conf;
- uint32_t smb_io_base;
s = (PIIX4PMState *)pci_register_device(bus,
"PM", sizeof(PIIX4PMState),
pci_conf[0x01] = 0x80;
pci_conf[0x02] = 0x13;
pci_conf[0x03] = 0x71;
+ pci_conf[0x06] = 0x80;
+ pci_conf[0x07] = 0x02;
pci_conf[0x08] = 0x00; // revision number
pci_conf[0x09] = 0x00;
pci_conf[0x0a] = 0x80; // other bridge device
pci_conf[0x0b] = 0x06; // bridge device
pci_conf[0x0e] = 0x00; // header_type
pci_conf[0x3d] = 0x01; // interrupt pin 1
-
+
pci_conf[0x40] = 0x01; /* PM io base read only bit */
-
+
register_ioport_write(0xb2, 2, 1, pm_smi_writeb, s);
register_ioport_read(0xb2, 2, 1, pm_smi_readb, s);
pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) |
(serial_hds[1] != NULL ? 0x90 : 0);
- smb_io_base = SMB_IO_BASE;
pci_conf[0x90] = smb_io_base | 1;
pci_conf[0x91] = smb_io_base >> 8;
pci_conf[0xd2] = 0x09;