<command>
<option>acpiacadapter</option>
</command>
+ <option>(adapter)</option>
</term>
- <listitem>ACPI ac adapter state.
+ <listitem>ACPI ac adapter state. On linux, the adapter option specifies the
+ subfolder of /sys/class/power_supply containing the state information (tries "AC"
+ and "ADP1" if there is no argument given). Non-linux systems ignore it.
<para /></listitem>
</varlistentry>
<varlistentry>
<varlistentry>
<term>
<command>
+ <option>cmdline_to_pid</option>
+ </command>
+ <option>string</option>
+ </term>
+ <listitem>PID of the first process that has string in it's
+ commandline
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
<option>color</option>
</command>
<option>(color)</option>
<option>var1 var2</option>
</term>
<listitem>Places the lines of var2 to the right of the
- lines of var1 seperated by the chars that are put between
+ lines of var1 separated by the chars that are put between
var1 and var2. For example: ${combine ${head /proc/cpuinfo
2} - ${head /proc/meminfo 1}} gives as output
"cpuinfo_line1 - meminfo_line1" on line 1 and
point value greater than 0, otherwise defaults to 15
minutes. Most useful when used in conjunction with Lua
and the Lua API. This object is threaded, and once a
- thread is created it can't be explicitely destroyed.
+ thread is created it can't be explicitly destroyed.
One thread will run for each URI specified. You can use
any protocol that Curl supports.</para>
</listitem>
<varlistentry>
<term>
<command>
+ <option>format_time</option>
+ </command>
+ <option>seconds format</option>
+ </term>
+ <listitem>Format time given in seconds. This var only works when
+ the times_in_seconds configuration setting is on. Format is a string
+ that should start and end with a "-char. The "-chars are not
+ part of the output, \w,\d,\h,\m,\s,\(,\) and \\ are replaced by
+ weeks,days,hours,minutes,seconds,(,) and \. If you leave out a unit,
+ it's value will be expressed in the highest unite lower then the
+ one left out. Text between ()-chars will not be visible if a
+ replaced unit in this text is 0. If seconds is a decimal number
+ then you can see the numbers behind the point by using \S
+ followed by a number that specifies the amount of
+ digits behind the point that you want to see (maximum 9).
+ You can also place a 'x' behind \S so you have all digits behind
+ the point and no trailing zero's. (also maximum 9)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
<option>forwarded_mails</option>
</command>
<option>(maildir)</option>
digits.</member>
<member>
<command>string</command>Argument is enclosed in
- quotation mark or the checks for double and long failed
- before.</member>
+ quotation marks (")</member>
</simplelist>Valid operands are: '>', '<', '>=',
'<=', '==', '!='.
<para /></listitem>
</term>
<listitem>Displays the number of messages in your global
IMAP inbox by default. You can define individual IMAP
- inboxes seperately by passing arguments to this object.
+ inboxes separately by passing arguments to this object.
Arguments are: "host user pass [-i interval (in seconds)]
[-f 'folder'] [-p port] [-e 'command'] [-r retries]". Default
port is 143, default folder is 'INBOX', default interval is
</term>
<listitem>Displays the number of unseen messages in your
global IMAP inbox by default. You can define individual
- IMAP inboxes seperately by passing arguments to this
+ IMAP inboxes separately by passing arguments to this
object. Arguments are: "host user pass [-i interval (in
seconds)] [-f 'folder'] [-p port] [-e 'command'] [-r retries]".
Default port is 143, default folder is 'INBOX', default
<option>(device)</option>
</term>
<listitem>Prints the mixer value as reported by the OS.
- Default mixer is "vol", but you can specify one of the
- following optional arguments: "vol", "bass", "treble",
- "synth", "pcm", "speaker", "line", "mic", "cd", "mix",
- "pcm2", "rec", "igain", "ogain", "line1", "line2", "line3",
- "dig1", "dig2", "dig3", "phin", "phout", "video", "radio",
- "monitor". Refer to the definition of SOUND_DEVICE_NAMES in
- <linux/soundcard.h> (on Linux), <soundcard.h>
- (on OpenBSD), or <sys/soundcard.h> to find the exact
- options available on your system.
+ Default mixer is "Master", but you can specify one of the
+ available ALSA Simple mixer controls.
+ You can find the list of those available on your system
+ using amixer.
<para /></listitem>
</varlistentry>
<varlistentry>
<listitem>Hostname
<para /></listitem>
</varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>nodename_short</option>
+ </command>
+ </term>
+ <listitem>Short hostname (same as 'hostname -s' shell command).
+ <para /></listitem>
+ </varlistentry>
<varlistentry>
<term>
<command>
</member>
<member>
<command>imagequality</command>
- <option>Which imagequality should be choosen by
+ <option>Which imagequality should be chosen by
OpenGL applications</option>
</member>
</simplelist>
<varlistentry>
<term>
<command>
+ <option>pid_chroot</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Directory used as rootdirectory by the process
+ (this will be "/" unless the process did a chroot syscall)
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
<option>pid_cmdline</option>
</command>
<option>pid</option>
<varlistentry>
<term>
<command>
+ <option>pid_environ</option>
+ </command>
+ <option>pid varname</option>
+ </term>
+ <listitem>Contents of a environment-var of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_environ_list</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>List of environment-vars that the process can see
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_exe</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Path to executed command that started the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_nice</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The nice value of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_openfiles</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>List of files that the process has open
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_parent</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The pid of the parent of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_priority</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The priority of the process (see 'priority' in "man 5 proc")
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_read</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Total number of bytes read by the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_state</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>State of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_state_short</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>One of the chars in "RSDZTW" representing the state
+ of the process where R is running, S is sleeping in an
+ interruptible wait, D is waiting in uninterruptible disk sleep,
+ Z is zombie, T is traced or stopped (on a signal), and W is paging
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_stderr</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Filedescriptor binded to the STDERR of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_stdin</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Filedescriptor binded to the STDIN of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_stdout</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Filedescriptor binded to the STDOUT of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_threads</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Number of threads in process containing this thread
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_thread_list</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>List with pid's from threads from this process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_time_kernelmode</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Amount of time that the process has been scheduled in kernel mode in seconds
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_time_usermode</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Amount of time that the process has been scheduled in user mode in seconds
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_time</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Sum of $pid_time_kernelmode and $pid_time_usermode
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_uid</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The real uid of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_euid</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The effective uid of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_suid</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The saved set uid of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_fsuid</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The file system uid of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_gid</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The real gid of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_egid</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The effective gid of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_sgid</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The saved set gid of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_fsgid</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>The file system gid of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_vmpeak</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Peak virtual memory size of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_vmsize</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Virtual memory size of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_vmlck</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Locked memory size of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_vmhwm</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Peak resident set size ("high water mark") of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_vmrss</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Resident set size of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_vmdata</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Data segment size of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_vmstk</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Stack segment size of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_vmexe</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Text segment size of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_vmlib</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Shared library code size of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_vmpte</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Page table entries size of the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>pid_write</option>
+ </command>
+ <option>pid</option>
+ </term>
+ <listitem>Total number of bytes written by the process
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
<option>platform</option>
</command>
<option>(dev) type n (factor offset)</option>
</term>
<listitem>Displays the number of unseen messages in your
global POP3 inbox by default. You can define individual
- POP3 inboxes seperately by passing arguments to this
+ POP3 inboxes separately by passing arguments to this
object. Arguments are: "host user pass [-i interval (in
seconds)] [-p port] [-e 'command'] [-r retries]". Default
port is 110, default interval is 5 minutes, and default
</term>
<listitem>Displays the amount of space (in MiB, 2^20) used
in your global POP3 inbox by default. You can define
- individual POP3 inboxes seperately by passing arguments to
+ individual POP3 inboxes separately by passing arguments to
this object. Arguments are: "host user pass [-i interval
(in seconds)] [-p port] [-e 'command'] [-r retries]". Default
port is 110, default interval is 5 minutes, and default
this action and spaces_in_front is given conky places
that many spaces in front of each item). This object is
threaded, and once a thread is created it can't be
- explicitely destroyed. One thread will run for each URI
+ explicitly destroyed. One thread will run for each URI
specified. You can use any protocol that Curl
supports.</para>
</listitem>
<varlistentry>
<term>
<command>
+ <option>running_threads</option>
+ </command>
+ </term>
+ <listitem>Number of running (runnable) threads. Linux only.
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
<option>scroll</option>
</command>
<option>length (step) text</option>
then the lines are placed behind each other separated with
a '|'-sign. If you change the textcolor inside $scroll it
will automatically have it's old value back at the end of
- $scroll. The end and the start of text will be seperated by
+ $scroll. The end and the start of text will be separated by
'length' number of spaces.
<para /></listitem>
</varlistentry>
<option>tcp_portmon</option>
</command>
<option>port_begin port_end item (index)</option>
- <emphasis>(ip4 only at present)</emphasis>
</term>
<listitem>
- <para>TCP port monitor for specified local ports. Port
- numbers must be in the range 1 to 65535. Valid items
- are:</para>
+ <para>TCP port (both IPv6 and IPv4) monitor for
+ specified local ports. Port numbers must be in
+ the range 1 to 65535. Valid items are:</para>
<simplelist>
<member>
<command>count</command>
</row>
<row>
<entry>
- <programlisting>${template1
+ ${template1
${template2\ disk\ root}
- /}</programlisting>
+ /}
</entry>
<entry>
- <programlisting>disk root:
+ disk root:
${fs_free /} / ${fs_size
- /}</programlisting>
+ /}
</entry>
</row>
</tbody>
<varlistentry>
<term>
<command>
+ <option>gid_name</option>
+ </command>
+ <option>gid</option>
+ </term>
+ <listitem>Name of group with this gid
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
+ <option>uid_name</option>
+ </command>
+ <option>uid</option>
+ </term>
+ <listitem>Username of user with this uid
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
<option>unflagged_mails</option>
</command>
<option>(maildir)</option>
<varlistentry>
<term>
<command>
+ <option>user_time</option>
+ </command>
+ <option>console</option>
+ </term>
+ <listitem>Lists how long the user for the given console has been
+ logged in for
+ <para /></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <command>
<option>utime</option>
</command>
<option>(format)</option>
<para>'delay_in_minutes' (optional, default 30) cannot
be less than 30 minutes.</para>
<para>This object is threaded, and once a thread is
- created it can't be explicitely destroyed. One thread
+ created it can't be explicitly destroyed. One thread
will run for each URI specified.</para>
<para>Note that these variables are still EXPERIMENTAL
and can be subject to many future changes.</para>
<para>'delay_in_minutes' (optional, default 210) cannot
be lower than 210 min.</para>
<para>This object is threaded, and once a thread is
- created it can't be explicitely destroyed. One thread
+ created it can't be explicitly destroyed. One thread
will run for each URI specified. You can use any
protocol that Curl supports.</para>
<para>Note that these variables are still EXPERIMENTAL
projects / monky / blobdiff