# Makefile.in for GNUPLOT documentation
#
# Note that the top-level file for documentation is gnuplot.doc.
# See README.
#
# To print manual:
#
#   For LaTeX
#       make gnuplot.dvi
#       (print or view gnuplot.dvi)
#     or (requires pdflatex)
#       make pdf
#       (print or view gnuplot.pdf)
#     or
#       make ps
#       (print or view gnuplot.ps)
#
#   For groff (GNU troff}
#       make grotxt
#       (print or view gnuplot.txt)
#     or
#       make grodvi
#       (print or view gnuplot.dvi)
#     or
#       make grops
#       (print or view gnuplot.ps)
#
#   For nroff
#     make gnuplot.nroff
#     (print or view gnuplot.nroff)
#
#   For troff
#     make "TROFF=itroff" troff    (use your troff here)
#
#   For GNU info (texinfo)
#     make info
#

# default is what is needed for interactive gnuplot
all: gnuplot.gih

# this tells GNU make not to export variables into the environment
# But other makes dont understand its significance, so it must
# not be the first target in the file. So it is here, before
# any variables are created, but after the default target
.NOEXPORT:

SHELL = /bin/sh

prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
datadir = @datadir@
datarootdir = @datarootdir@
infodir = @infodir@
srcdir = @srcdir@
top_builddir = ..
top_srcdir = @top_srcdir@
VPATH = @srcdir@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :

INFO_DEPS = $(srcdir)/gnuplot.info

CC     = @CC@
CPP    = @CPP@
DEFS   = @DEFS@
DEFAULT_INCLUDES = -I. -I$(srcdir) -I.. -I$(top_builddir)
CPPFLAGS = @CPPFLAGS@
CFLAGS = @CFLAGS@
GIHDIR = @GIHDIR@
INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/term
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@

COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(CFLAGS) $(LDFLAGS) -o $@

.c.o:
	$(COMPILE) -c $<

# The makeinfo command from GNU texinfo
MAKEINFO = @MAKEINFO@

# Required for the temporary .info file fix
EMACS = @EMACS@

# substitute your troff command (and any flags) for this one
TROFF = @TROFF@

# LaTeX command, either latex or latex2e or no
LATEX = @LATEX@

# PlainTeX
PLAINTEX = @PLAINTEX@

# PDFLaTeX command
PDFLATEX = @PDFLATEX@

# substitute your DVI to PostScript conversion program here
DVIPS = @DVIPS@

T = $(top_srcdir)/term/
CORETERM = $(T)aed.trm $(T)ai.trm $(T)amiga.trm $(T)apollo.trm \
$(T)aquaterm.trm $(T)atariaes.trm $(T)atarivdi.trm $(T)be.trm $(T)cgi.trm \
$(T)cgm.trm $(T)corel.trm $(T)debug.trm $(T)djsvga.trm $(T)dumb.trm \
$(T)dxf.trm $(T)dxy.trm $(T)eepic.trm $(T)emf.trm $(T)emxvga.trm \
$(T)epson.trm $(T)excl.trm $(T)fg.trm $(T)fig.trm $(T)gd.trm \
$(T)ggi.trm $(T)gnugraph.trm $(T)gpic.trm $(T)gpr.trm \
$(T)grass.trm $(T)hp26.trm $(T)hp2648.trm $(T)hp500c.trm $(T)hpgl.trm \
$(T)hpljii.trm $(T)hppj.trm $(T)imagen.trm $(T)iris4d.trm $(T)kyo.trm \
$(T)latex.trm $(T)linux.trm $(T)mac.trm $(T)metafont.trm $(T)metapost.trm \
$(T)mgr.trm $(T)mif.trm $(T)multitos.trm $(T)next.trm $(T)openstep.trm \
$(T)pbm.trm $(T)pc.trm $(T)pdf.trm $(T)pm.trm $(T)post.trm \
$(T)pslatex.trm $(T)pstricks.trm $(T)qms.trm $(T)regis.trm $(T)rgip.trm \
$(T)sun.trm $(T)svg.trm $(T)t410x.trm $(T)tek.trm \
$(T)texdraw.trm $(T)tgif.trm $(T)tkcanvas.trm $(T)tpic.trm $(T)unixpc.trm \
$(T)unixplot.trm $(T)v384.trm $(T)vgagl.trm $(T)vws.trm $(T)win.trm \
$(T)wxt.trm $(T)x11.trm $(T)xlib.trm

DIST_COMMON = README Makefile.in

SOURCES = checkdoc.c doc2gih.c doc2hlp.c doc2ipf.c doc2ms.c doc2rnh.c \
doc2rtf.c doc2tex.c termdoc.c xref.c

TERM_H = $(top_srcdir)/src/term.h

BUILT_SOURCES = allterm.h 

HEADERS = doc2x.h xref.h

EXTRA_DIST = doc2texi.el gnuplot.doc gnuplot.texi gpcard.tex makefile.ami \
makefile.dst titlepag.ipf titlepag.ms titlepag.tex toc_entr.sty old psdoc \
faq-ja.tex gnuplot-ja.doc README.ja term-ja.diff

CLEANFILES = doc2tex gnuplot.tex gnuplot.dvi gnuplot.aux gnuplot.log \
gnuplot.toc gnuplot.pdf gnuplot.ps gpcard.dvi gpcard.log gpcard.ps alldoc2gih \
doc2gih gnuplot.gih doc2hlp gnuplot.hlp gnuplot.idx gnuplot.ilg gnuplot.ind \
gnuplot.info* gnuplot.out doc2ipf gnuplot.ipf doc2ms gnuplot.ms doc2rnh \
gnuplot.rnh doc2rtf gnuplot.rtf gnuplot.nroff checkdoc gnuplot.txt

DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(EXTRA_DIST)

allterm.h: $(CORETERM)
	@echo "Building allterm.h"
	@for e in `egrep "^[ 	]*START_HELP" $(CORETERM) |\
	     LC_ALL=C sort -f -t':' -k2` ; do \
	  f=`echo $$e |cut -d\: -f1` ; s=`echo $$e | cut -d\: -f2` ;\
	  sed -n "/^[ 	]*$$s/,/^[ 	]*END_HELP/p" $$f ; \
	done >$@

# HBB 20041111: commented out, since it's no longer used.
#term.h: $(CORETERM)
#	@echo "Building term.h"
#	@cat ../config.h $(CORETERM) > term.c
#	$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) -DTERM_DRIVER_H -DTERM_HELP term.c | \
#	  sed '/^ *$$/d;/^#/d' >$@
#	@rm -f term.c

# for debugging
alldoc: check dvi gih hlp html info ipf ms nroff pdf ps rnh rtf

### [tn]roff documentation
troff: gnuplot.ms titlepag.ms
	@if [ "$(srcdir)" = "$(top_builddir)" ] ; then \
	    tbl gnuplot.ms | eqn | $(TROFF) -ms ; \
	else \
	    < gnuplot.ms sed "s,titlepag\.ms,$(srcdir)/titlepag\.ms," |\
	      tbl | eqn | $(TROFF) -ms ; \
	fi

nroff: gnuplot.nroff

gnuplot.nroff: gnuplot.ms titlepag.ms
	@if [ "$(srcdir)" = "$(top_builddir)" ] ; then \
	    tbl gnuplot.ms | neqn | nroff -ms | col > gnuplot.nroff ; \
	else \
	    < gnuplot.ms sed "s,titlepag\.ms,$(srcdir)/titlepag\.ms," |\
	      tbl | neqn | nroff -ms | col > gnuplot.nroff ; \
	fi

### groff documentation

groff: grotxt grodvi grops

grotxt: gnuplot.ms titlepag.ms
	@if [ "$(srcdir)" = "$(top_builddir)" ] ; then \
	    groff -s -p -t -e -ms -Tlatin1 gnuplot.ms > gnuplot.txt ; \
	else \
	    sed "s,titlepag\.ms,$(srcdir)/titlepag\.ms," gnuplot.ms |\
	      groff -s -p -t -e -ms -Tlatin1 gnuplot.ms > gnuplot.txt ; \
	fi

grodvi: gnuplot.ms titlepag.ms
	@if [ "$(srcdir)" = "$(top_builddir)" ] ; then \
	    groff -s -p -t -e -ms -Tdvi gnuplot.ms > gnuplot.dvi ; \
	else \
	    sed "s,titlepag\.ms,$(srcdir)/titlepag\.ms," gnuplot.ms |\
	      groff -s -p -t -e -ms -Tdvi gnuplot.ms > gnuplot.dvi ; \
	fi

grops: gnuplot.ms titlepag.ms
	@if [ "$(srcdir)" = "$(top_builddir)" ] ; then \
	    groff -s -p -t -e -ms -Tps gnuplot.ms > gnuplot.ps ; \
	else \
	    sed "s,titlepag\.ms,$(srcdir)/titlepag\.ms," gnuplot.ms |\
	      groff -s -p -t -e -ms -Tps gnuplot.ms > gnuplot.ps ; \
	fi

### doc2xxx dependencies
ms: gnuplot.ms

gnuplot.ms: doc2ms $(srcdir)/gnuplot.doc
	./doc2ms $(srcdir)/gnuplot.doc gnuplot.ms

doc2ms: doc2ms.o termdoc.o
	$(LINK) doc2ms.o termdoc.o $(LIBS)

doc2ms.o: doc2ms.c $(BUILT_SOURCES)
	$(COMPILE) -DALL_TERM_DOC -c $(srcdir)/doc2ms.c

### html
html: htmldocs/gnuplot.html

# requires makeinfo (GNU texinfo) 4.0 or better
# htmldocs/gnuplot.html: $(srcdir)/gnuplot.texi 
#	$(MAKEINFO) --html -I$(srcdir) $(srcdir)/gnuplot.texi --no-split --output=$@

# TeX itself does a better job these days, and doesn't depend on having
# emacs around to do lisp pre-processing
htmldocs/gnuplot.html: $(srcdir)/gnuplot.tex
	mkdir -p htmldocs
	latex2html -dir htmldocs -local_icons gnuplot

### PDF documentation
pdf: gnuplot.pdf

gnuplot.pdf: gnuplot.tex
	@if test $(PDFLATEX) != no ; then \
	  rm -f gnuplot.idx ; \
	  touch gnuplot.idx ; \
	  TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(PDFLATEX) gnuplot ; \
	  TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(PDFLATEX) gnuplot ; \
	  TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(PDFLATEX) gnuplot ; \
	  makeindex gnuplot ; \
	  TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(PDFLATEX) gnuplot ; \
	else \
	  echo pdflatex not found - cannot build pdf file ; \
	fi

### LaTeX documentation
tex: gnuplot.tex

gnuplot.tex: doc2tex $(srcdir)/gnuplot.doc
	./doc2tex $(srcdir)/gnuplot.doc gnuplot.tex

doc2tex: doc2tex.o termdoc.o
	$(LINK) doc2tex.o termdoc.o $(LIBS)

doc2tex.o: doc2tex.c $(BUILT_SOURCES)
	$(COMPILE) -DALL_TERM_DOC -c $(srcdir)/doc2tex.c

# this is how to make DVI files
dvi: gnuplot.dvi gpcard.dvi

gnuplot.dvi: gnuplot.tex titlepag.tex toc_entr.sty
	@if test $(LATEX) != no ; then \
	  rm -f gnuplot.idx ; \
	  touch gnuplot.idx ; \
	  TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(LATEX) gnuplot ; \
	  TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(LATEX) gnuplot ; \
	  TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(LATEX) gnuplot ; \
	  makeindex gnuplot ; \
	  TEXINPUTS=.:$(srcdir):$(top_srcdir):${TEXINPUTS}: $(LATEX) gnuplot ; \
	else \
	  echo "latex not found - cannot build dvi file" ; \
	fi

gpcard.dvi: gpcard.tex
	@if test $(PLAINTEX) != no ; then \
              TEXINPUTS=.:$(srcdir):$(top_srcdir): tex gpcard ; \
	else \
	  echo "plaintex not found - cannot build dvi file" ; \
	fi

### Postscript format
# if pslatex has been installed, add "times" to titlepage.tex
ps: gnuplot.ps gpcard.ps

gnuplot.ps: gnuplot.dvi
	@if test $(DVIPS) != no ; then \
	   $(DVIPS) gnuplot.dvi -o gnuplot.ps ; \
	else \
	   echo "dvips not found - cannot build PS file" ; \
	fi

gpcard.ps: gpcard.dvi
	@if test $(DVIPS) != no ; then \
            $(DVIPS) gpcard.dvi -o gpcard.ps ; \
	else \
	   echo "dvips not found - cannot build PS file" ; \
	fi


# this is how to make gnuplot.hlp
hlp: gnuplot.hlp

gnuplot.hlp: doc2hlp $(srcdir)/gnuplot.doc
	./doc2hlp $(srcdir)/gnuplot.doc gnuplot.hlp

doc2hlp: doc2hlp.o termdoc.o
	$(LINK) doc2hlp.o termdoc.o $(LIBS)

### gnuplot interactive help format
gih: gnuplot.gih

gnuplot.gih: doc2gih $(srcdir)/gnuplot.doc
	@rm -f alldoc2gih
	./doc2gih $(srcdir)/gnuplot.doc gnuplot.gih

doc2gih: doc2gih.o termdoc.o
	$(LINK) doc2gih.o termdoc.o $(LIBS)

# To include all terminals in the .gih file
allgih: alldoc2gih $(srcdir)/gnuplot.doc
	@rm -f doc2gih
	./alldoc2gih $(srcdir)/gnuplot.doc gnuplot.gih

alldoc2gih: alldoc2gih.o termdoc.o
	$(LINK) alldoc2gih.o termdoc.o $(LIBS)

alldoc2gih.o: doc2gih.c $(BUILT_SOURCES)
	$(COMPILE) -DALL_TERM_DOC -c $(srcdir)/doc2gih.c
	@mv doc2gih.o alldoc2gih.o

### GNU info format
info: gnuplot.info

gnuplot.info: $(srcdir)/gnuplot.texi
	$(MAKEINFO) -I$(srcdir) $(srcdir)/gnuplot.texi --no-split --output=$@

# Thanks to Bruce Ravel for doc2texi.el!
$(srcdir)/gnuplot.texi: $(srcdir)/doc2texi.el $(srcdir)/gnuplot.doc
	@echo "Creating texinfo"
	@if test "$(EMACS)" != no; then \
	   cd $(srcdir) ;  \
	   $(EMACS) -batch -l doc2texi.el -f d2t-doc-to-texi ; \
	else \
	   echo "No emacs found - cannot create texinfo file" ; \
	fi

# this is how to make OS/2 ipfc documentation
ipf: gnuplot.ipf

gnuplot.ipf: doc2ipf $(srcdir)/gnuplot.doc
	./doc2ipf $(srcdir)/gnuplot.doc gnuplot.ipf

doc2ipf: doc2ipf.o termdoc.o xref.o
	$(LINK) doc2ipf.o termdoc.o xref.o $(LIBS)

### Rich Text Format
rtf: gnuplot.rtf

gnuplot.rtf: doc2rtf $(srcdir)/gnuplot.doc
	./doc2rtf $(srcdir)/gnuplot.doc gnuplot.rtf

doc2rtf: doc2rtf.o termdoc.o xref.o
	$(LINK) doc2rtf.o termdoc.o xref.o $(LIBS)

# this is how to make rnh documentation (VMS help format)
rnh: gnuplot.rnh

gnuplot.rnh: doc2rnh $(srcdir)/gnuplot.doc
	./doc2rnh $(srcdir)/gnuplot.doc gnuplot.rnh

doc2rnh: doc2rnh.o termdoc.o
	$(LINK) doc2rnh.o termdoc.o $(LIBS)

### AmigaGuide(R) format
## requires the GG version of makeinfo
#guide: gnuplot.guide
#
#gnuplot.guide: $(srcdir)/gnuplot.texi $(srcdir)/gnuplot.doc
#	$(MAKEINFO) --amiga -I$(srcdir) $(srcdir)/gnuplot.texi --no-split --output=$@
#
# end doc2xxx section

# this is how to check the gnuplot.doc file
check: all checkdoc
	@./checkdoc < $(srcdir)/gnuplot.doc; \
	if test $$? -eq 0; then \
	  echo "PASS: gnuplot.doc"; \
	else \
	  :; \
	fi

checkdoc: checkdoc.o termdoc.o $(srcdir)/gnuplot.doc
	$(LINK) checkdoc.o termdoc.o $(LIBS)

checkdoc.o: checkdoc.c $(BUILT_SOURCES)
	$(COMPILE) -DALL_TERM_DOC -c $(srcdir)/checkdoc.c

# install section
install: install-gih install-info

install-gih: gnuplot.gih
	$(top_srcdir)/mkinstalldirs $(DESTDIR)$(GIHDIR)
	$(INSTALL_DATA) gnuplot.gih $(DESTDIR)$(GIHDIR)/gnuplot.gih

install-info: gnuplot.info
	$(top_srcdir)/mkinstalldirs $(DESTDIR)$(infodir)
	$(INSTALL_DATA) gnuplot.info $(DESTDIR)$(infodir)/gnuplot.info
	@if (install-info --version && \
	     install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
	  echo "install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/gnuplot.info";\
	  install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/gnuplot.info || :;\
	else : ; fi

installcheck:

install-exec:

# uninstall section
uninstall: uninstall-gih uninstall-info

uninstall-gih:
	rm -f $(DESTDIR)$(GIHDIR)/gnuplot.gih

uninstall-info:
	$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile"; \
	    install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if cd $(DESTDIR)$(infodir); then \
	     echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

# for VMS only
install-vms: gnuplot.hlp
	$(INSTALL_DATA) gnuplot.hlp $(datadir)/gnuplot.hlp

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = docs


distdir: $(DISTFILES)
	distdir=`cd $(distdir) && pwd`
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done

clean-local:
	@test "$(top_srcdir)" = "$(top_builddir)" || rm -f gnuplot.texi

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
	-test -d htmldocs && rm -rf htmldocs

clean-compile:
	rm -f *.o core *.core

clean: clean-local clean-generic clean-compile
	-rm -f *.exe *~

mostlyclean: clean

distclean: clean
	-rm -f Makefile

realclean: distclean
	-rm -f TAGS

Makefile: Makefile.in ../config.status
	cd .. \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status

### Dependencies - do not edit!

# all doc2somethings depend on termdoc and either ../term.h or
# allterm.h, maybe this would be better as separate object file
# (but then we have to change all the other makefiles). Plus then
# we cannot make some doc2* filters use allterm.h and others use term.h

checkdoc.o: checkdoc.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h allterm.h
alldoc2gih.o: doc2gih.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h allterm.h
doc2gih.o: doc2gih.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h $(TERM_H)
doc2hlp.o: doc2hlp.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h $(TERM_H)
doc2ipf.o: doc2ipf.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h $(TERM_H)
doc2ms.o: doc2ms.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h allterm.h
doc2rnh.o: doc2rnh.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h $(TERM_H)
doc2rtf.o: doc2rtf.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h $(TERM_H)
doc2tex.o: doc2tex.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h allterm.h
termdoc.o: termdoc.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h
xref.o: xref.c ../config.h $(top_srcdir)/src/syscfg.h \
		$(top_srcdir)/src/stdfn.h doc2x.h xref.h

#the end