1 ##### Example wpa_supplicant configuration file ###############################
3 # This file describes configuration file format and lists all available option.
4 # Please also take a look at simpler configuration examples in 'examples'
7 # Empty lines and lines starting with # are ignored
9 # NOTE! This file may contain password information and should probably be made
10 # readable only by root user on multiuser systems.
12 # Note: All file paths in this configuration file should use full (absolute,
13 # not relative to working directory) path in order to allow working directory
14 # to be changed. This can happen if wpa_supplicant is run in the background.
16 # Whether to allow wpa_supplicant to update (overwrite) configuration
18 # This option can be used to allow wpa_supplicant to overwrite configuration
19 # file whenever configuration is changed (e.g., new network block is added with
20 # wpa_cli or wpa_gui, or a password is changed). This is required for
21 # wpa_cli/wpa_gui to be able to store the configuration changes permanently.
22 # Please note that overwriting configuration file will remove the comments from
26 # global configuration (shared by all network blocks)
28 # Parameters for the control interface. If this is specified, wpa_supplicant
29 # will open a control interface that is available for external programs to
30 # manage wpa_supplicant. The meaning of this string depends on which control
31 # interface mechanism is used. For all cases, the existance of this parameter
32 # in configuration is used to determine whether the control interface is
35 # For UNIX domain sockets (default on Linux and BSD): This is a directory that
36 # will be created for UNIX domain sockets for listening to requests from
37 # external programs (CLI/GUI, etc.) for status information and configuration.
38 # The socket file will be named based on the interface name, so multiple
39 # wpa_supplicant processes can be run at the same time if more than one
41 # /var/run/wpa_supplicant is the recommended directory for sockets and by
42 # default, wpa_cli will use it when trying to connect with wpa_supplicant.
44 # Access control for the control interface can be configured by setting the
45 # directory to allow only members of a group to use sockets. This way, it is
46 # possible to run wpa_supplicant as root (since it needs to change network
47 # configuration and open raw sockets) and still allow GUI/CLI components to be
48 # run as non-root users. However, since the control interface can be used to
49 # change the network configuration, this access needs to be protected in many
50 # cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
51 # want to allow non-root users to use the control interface, add a new group
52 # and change this value to match with that group. Add users that should have
53 # control interface access to this group. If this variable is commented out or
54 # not included in the configuration file, group will not be changed from the
55 # value it got by default when the directory or socket was created.
57 # When configuring both the directory and group, use following format:
58 # DIR=/var/run/wpa_supplicant GROUP=wheel
59 # DIR=/var/run/wpa_supplicant GROUP=0
60 # (group can be either group name or gid)
62 # For UDP connections (default on Windows): The value will be ignored. This
63 # variable is just used to select that the control interface is to be created.
64 # The value can be set to, e.g., udp (ctrl_interface=udp)
66 # For Windows Named Pipe: This value can be used to set the security descriptor
67 # for controlling access to the control interface. Security descriptor can be
68 # set using Security Descriptor String Format (see http://msdn.microsoft.com/
69 # library/default.asp?url=/library/en-us/secauthz/security/
70 # security_descriptor_string_format.asp). The descriptor string needs to be
71 # prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty
72 # DACL (which will reject all connections). See README-Windows.txt for more
73 # information about SDDL string format.
75 ctrl_interface=/var/run/wpa_supplicant
77 # IEEE 802.1X/EAPOL version
78 # wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
79 # EAPOL version 2. However, there are many APs that do not handle the new
80 # version number correctly (they seem to drop the frames completely). In order
81 # to make wpa_supplicant interoperate with these APs, the version number is set
82 # to 1 by default. This configuration value can be used to set it to the new
86 # AP scanning/selection
87 # By default, wpa_supplicant requests driver to perform AP scanning and then
88 # uses the scan results to select a suitable AP. Another alternative is to
89 # allow the driver to take care of AP scanning and selection and use
90 # wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
91 # information from the driver.
92 # 1: wpa_supplicant initiates scanning and AP selection
93 # 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
94 # parameters (e.g., WPA IE generation); this mode can also be used with
95 # non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
96 # APs (i.e., external program needs to control association). This mode must
97 # also be used when using wired Ethernet drivers.
98 # 2: like 0, but associate with APs using security policy and SSID (but not
99 # BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
100 # enable operation with hidden SSIDs and optimized roaming; in this mode,
101 # the network blocks in the configuration file are tried one by one until
102 # the driver reports successful association; each network block should have
103 # explicit security policy (i.e., only one option in the lists) for
104 # key_mgmt, pairwise, group, proto variables
107 # EAP fast re-authentication
108 # By default, fast re-authentication is enabled for all EAP methods that
109 # support it. This variable can be used to disable fast re-authentication.
110 # Normally, there is no need to disable this.
113 # OpenSSL Engine support
114 # These options can be used to load OpenSSL engines.
115 # The two engines that are supported currently are shown below:
116 # They are both from the opensc project (http://www.opensc.org/)
117 # By default no engines are loaded.
118 # make the opensc engine available
119 #opensc_engine_path=/usr/lib/opensc/engine_opensc.so
120 # make the pkcs11 engine available
121 #pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
122 # configure the path to the pkcs11 module required by the pkcs11 engine
123 #pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
125 # Dynamic EAP methods
126 # If EAP methods were built dynamically as shared object files, they need to be
127 # loaded here before being used in the network blocks. By default, EAP methods
128 # are included statically in the build, so these lines are not needed
129 #load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
130 #load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
132 # Driver interface parameters
133 # This field can be used to configure arbitrary driver interace parameters. The
134 # format is specific to the selected driver interface. This field is not used
136 #driver_param="field=value"
139 # The ISO/IEC alpha2 country code for the country in which this device is
140 # currently operating.
143 # Maximum lifetime for PMKSA in seconds; default 43200
144 #dot11RSNAConfigPMKLifetime=43200
145 # Threshold for reauthentication (percentage of PMK lifetime); default 70
146 #dot11RSNAConfigPMKReauthThreshold=70
147 # Timeout for security association negotiation in seconds; default 60
148 #dot11RSNAConfigSATimeout=60
150 # Wi-Fi Protected Setup (WPS) parameters
152 # Universally Unique IDentifier (UUID; see RFC 4122) of the device
153 # If not configured, UUID will be generated based on the local MAC address.
154 #uuid=12345678-9abc-def0-1234-56789abcdef0
157 # User-friendly description of device; up to 32 octets encoded in UTF-8
158 #device_name=Wireless Client
161 # The manufacturer of the device (up to 64 ASCII characters)
162 #manufacturer=Company
165 # Model of the device (up to 32 ASCII characters)
169 # Additional device description (up to 32 ASCII characters)
173 # Serial number of the device (up to 32 characters)
176 # Primary Device Type
177 # Used format: <categ>-<OUI>-<subcateg>
178 # categ = Category as an integer value
179 # OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for
181 # subcateg = OUI-specific Sub Category as an integer value
183 # 1-0050F204-1 (Computer / PC)
184 # 1-0050F204-2 (Computer / Server)
185 # 5-0050F204-1 (Storage / NAS)
186 # 6-0050F204-1 (Network Infrastructure / AP)
187 #device_type=1-0050F204-1
190 # 4-octet operating system version number (hex string)
193 # Credential processing
194 # 0 = process received credentials internally (default)
195 # 1 = do not process received credentials; just pass them over ctrl_iface to
196 # external program(s)
197 # 2 = process received credentials internally and pass them over ctrl_iface
198 # to external program(s)
199 #wps_cred_processing=0
203 # Each network (usually AP's sharing the same SSID) is configured as a separate
204 # block in this configuration file. The network blocks are in preference order
205 # (the first match is used).
207 # network block fields:
210 # 0 = this network can be used (default)
211 # 1 = this network block is disabled (can be enabled through ctrl_iface,
212 # e.g., with wpa_cli or wpa_gui)
214 # id_str: Network identifier string for external scripts. This value is passed
215 # to external action script through wpa_cli as WPA_ID_STR environment
216 # variable to make it easier to do network specific configuration.
218 # ssid: SSID (mandatory); either as an ASCII string with double quotation or
219 # as hex string; network name
222 # 0 = do not scan this SSID with specific Probe Request frames (default)
223 # 1 = scan with SSID-specific Probe Request frames (this can be used to
224 # find APs that do not accept broadcast SSID or use multiple SSIDs;
225 # this will add latency to scanning, so enable this only when needed)
227 # bssid: BSSID (optional); if set, this network block is used only when
228 # associating with the AP using the configured BSSID
230 # priority: priority group (integer)
231 # By default, all networks will get same priority group (0). If some of the
232 # networks are more desirable, this field can be used to change the order in
233 # which wpa_supplicant goes through the networks when selecting a BSS. The
234 # priority groups will be iterated in decreasing priority (i.e., the larger the
235 # priority value, the sooner the network is matched against the scan results).
236 # Within each priority group, networks will be selected based on security
237 # policy, signal strength, etc.
238 # Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not
239 # using this priority to select the order for scanning. Instead, they try the
240 # networks in the order that used in the configuration file.
242 # mode: IEEE 802.11 operation mode
243 # 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
244 # 1 = IBSS (ad-hoc, peer-to-peer)
245 # Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
246 # and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
247 # to be set to 2 for IBSS. WPA-None requires following network block options:
248 # proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
249 # both), and psk must also be set.
251 # frequency: Channel frequency in megahertz (MHz) for IBSS, e.g.,
252 # 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial
253 # channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode.
254 # In addition, this value is only used by the station that creates the IBSS. If
255 # an IBSS network with the configured SSID is already present, the frequency of
256 # the network will be used instead of this configured value.
258 # proto: list of accepted protocols
259 # WPA = WPA/IEEE 802.11i/D3.0
260 # RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
261 # If not set, this defaults to: WPA RSN
263 # key_mgmt: list of accepted authenticated key management protocols
264 # WPA-PSK = WPA pre-shared key (this requires 'psk' field)
265 # WPA-EAP = WPA using EAP authentication
266 # IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
268 # NONE = WPA is not used; plaintext or static WEP could be used
269 # WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms
270 # WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms
271 # If not set, this defaults to: WPA-PSK WPA-EAP
273 # auth_alg: list of allowed IEEE 802.11 authentication algorithms
274 # OPEN = Open System authentication (required for WPA/WPA2)
275 # SHARED = Shared Key authentication (requires static WEP keys)
276 # LEAP = LEAP/Network EAP (only used with LEAP)
277 # If not set, automatic selection is used (Open System with LEAP enabled if
278 # LEAP is allowed as one of the EAP methods).
280 # pairwise: list of accepted pairwise (unicast) ciphers for WPA
281 # CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
282 # TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
283 # NONE = Use only Group Keys (deprecated, should not be included if APs support
285 # If not set, this defaults to: CCMP TKIP
287 # group: list of accepted group (broadcast/multicast) ciphers for WPA
288 # CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
289 # TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
290 # WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
291 # WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
292 # If not set, this defaults to: CCMP TKIP WEP104 WEP40
294 # psk: WPA preshared key; 256-bit pre-shared key
295 # The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
296 # 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
297 # generated using the passphrase and SSID). ASCII passphrase must be between
298 # 8 and 63 characters (inclusive).
299 # This field is not needed, if WPA-EAP is used.
300 # Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
301 # from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
302 # startup and reconfiguration time can be optimized by generating the PSK only
303 # only when the passphrase or SSID has actually changed.
305 # eapol_flags: IEEE 802.1X/EAPOL options (bit field)
306 # Dynamic WEP key required for non-WPA mode
307 # bit0 (1): require dynamically generated unicast WEP key
308 # bit1 (2): require dynamically generated broadcast WEP key
309 # (3 = require both keys; default)
310 # Note: When using wired authentication, eapol_flags must be set to 0 for the
311 # authentication to be completed successfully.
313 # mixed_cell: This option can be used to configure whether so called mixed
314 # cells, i.e., networks that use both plaintext and encryption in the same
315 # SSID, are allowed when selecting a BSS form scan results.
316 # 0 = disabled (default)
319 # proactive_key_caching:
320 # Enable/disable opportunistic PMKSA caching for WPA2.
321 # 0 = disabled (default)
324 # wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or
325 # hex without quotation, e.g., 0102030405)
326 # wep_tx_keyidx: Default WEP key index (TX) (0..3)
328 # peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is
329 # allowed. This is only used with RSN/WPA2.
330 # 0 = disabled (default)
334 # wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to
335 # enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies.
337 # Following fields are only used with internal EAP implementation.
338 # eap: space-separated list of accepted EAP methods
339 # MD5 = EAP-MD5 (unsecure and does not generate keying material ->
340 # cannot be used with WPA; to be used as a Phase 2 method
341 # with EAP-PEAP or EAP-TTLS)
342 # MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
343 # as a Phase 2 method with EAP-PEAP or EAP-TTLS)
344 # OTP = EAP-OTP (cannot be used separately with WPA; to be used
345 # as a Phase 2 method with EAP-PEAP or EAP-TTLS)
346 # GTC = EAP-GTC (cannot be used separately with WPA; to be used
347 # as a Phase 2 method with EAP-PEAP or EAP-TTLS)
348 # TLS = EAP-TLS (client and server certificate)
349 # PEAP = EAP-PEAP (with tunnelled EAP authentication)
350 # TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
352 # If not set, all compiled in methods are allowed.
354 # identity: Identity string for EAP
355 # This field is also used to configure user NAI for
356 # EAP-PSK/PAX/SAKE/GPSK.
357 # anonymous_identity: Anonymous identity string for EAP (to be used as the
358 # unencrypted identity with EAP types that support different tunnelled
359 # identity, e.g., EAP-TTLS)
360 # password: Password string for EAP. This field can include either the
361 # plaintext password (using ASCII or hex string) or a NtPasswordHash
362 # (16-byte MD4 hash of password) in hash:<32 hex digits> format.
363 # NtPasswordHash can only be used when the password is for MSCHAPv2 or
364 # MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP).
365 # EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit
366 # PSK) is also configured using this field. For EAP-GPSK, this is a
367 # variable length PSK.
368 # ca_cert: File path to CA certificate file (PEM/DER). This file can have one
369 # or more trusted CA certificates. If ca_cert and ca_path are not
370 # included, server certificate will not be verified. This is insecure and
371 # a trusted CA certificate should always be configured when using
372 # EAP-TLS/TTLS/PEAP. Full path should be used since working directory may
373 # change when wpa_supplicant is run in the background.
374 # On Windows, trusted CA certificates can be loaded from the system
375 # certificate store by setting this to cert_store://<name>, e.g.,
376 # ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".
377 # Note that when running wpa_supplicant as an application, the user
378 # certificate store (My user account) is used, whereas computer store
379 # (Computer account) is used when running wpasvc as a service.
380 # ca_path: Directory path for CA certificate files (PEM). This path may
381 # contain multiple CA certificates in OpenSSL format. Common use for this
382 # is to point to system trusted CA list which is often installed into
383 # directory like /etc/ssl/certs. If configured, these certificates are
384 # added to the list of trusted CAs. ca_cert may also be included in that
385 # case, but it is not required.
386 # client_cert: File path to client certificate file (PEM/DER)
387 # Full path should be used since working directory may change when
388 # wpa_supplicant is run in the background.
389 # Alternatively, a named configuration blob can be used by setting this
390 # to blob://<blob name>.
391 # private_key: File path to client private key file (PEM/DER/PFX)
392 # When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
393 # commented out. Both the private key and certificate will be read from
394 # the PKCS#12 file in this case. Full path should be used since working
395 # directory may change when wpa_supplicant is run in the background.
396 # Windows certificate store can be used by leaving client_cert out and
397 # configuring private_key in one of the following formats:
398 # cert://substring_to_match
399 # hash://certificate_thumbprint_in_hex
400 # for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
401 # Note that when running wpa_supplicant as an application, the user
402 # certificate store (My user account) is used, whereas computer store
403 # (Computer account) is used when running wpasvc as a service.
404 # Alternatively, a named configuration blob can be used by setting this
405 # to blob://<blob name>.
406 # private_key_passwd: Password for private key file (if left out, this will be
407 # asked through control interface)
408 # dh_file: File path to DH/DSA parameters file (in PEM format)
409 # This is an optional configuration file for setting parameters for an
410 # ephemeral DH key exchange. In most cases, the default RSA
411 # authentication does not use this configuration. However, it is possible
412 # setup RSA to use ephemeral DH key exchange. In addition, ciphers with
413 # DSA keys always use ephemeral DH keys. This can be used to achieve
414 # forward secrecy. If the file is in DSA parameters format, it will be
415 # automatically converted into DH params.
416 # subject_match: Substring to be matched against the subject of the
417 # authentication server certificate. If this string is set, the server
418 # sertificate is only accepted if it contains this string in the subject.
419 # The subject string is in following format:
420 # /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
421 # altsubject_match: Semicolon separated string of entries to be matched against
422 # the alternative subject name of the authentication server certificate.
423 # If this string is set, the server sertificate is only accepted if it
424 # contains one of the entries in an alternative subject name extension.
425 # altSubjectName string is in following format: TYPE:VALUE
426 # Example: EMAIL:server@example.com
427 # Example: DNS:server.example.com;DNS:server2.example.com
428 # Following types are supported: EMAIL, DNS, URI
429 # phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
430 # (string with field-value pairs, e.g., "peapver=0" or
431 # "peapver=1 peaplabel=1")
432 # 'peapver' can be used to force which PEAP version (0 or 1) is used.
433 # 'peaplabel=1' can be used to force new label, "client PEAP encryption",
434 # to be used during key derivation when PEAPv1 or newer. Most existing
435 # PEAPv1 implementation seem to be using the old label, "client EAP
436 # encryption", and wpa_supplicant is now using that as the default value.
437 # Some servers, e.g., Radiator, may require peaplabel=1 configuration to
438 # interoperate with PEAPv1; see eap_testing.txt for more details.
439 # 'peap_outer_success=0' can be used to terminate PEAP authentication on
440 # tunneled EAP-Success. This is required with some RADIUS servers that
441 # implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
442 # Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
443 # include_tls_length=1 can be used to force wpa_supplicant to include
444 # TLS Message Length field in all TLS messages even if they are not
446 # sim_min_num_chal=3 can be used to configure EAP-SIM to require three
447 # challenges (by default, it accepts 2 or 3)
448 # result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use
449 # protected result indication.
450 # 'crypto_binding' option can be used to control PEAPv0 cryptobinding
452 # * 0 = do not use cryptobinding (default)
453 # * 1 = use cryptobinding if server supports it
454 # * 2 = require cryptobinding
455 # EAP-WSC (WPS) uses following options: pin=<Device Password> or
457 # phase2: Phase2 (inner authentication with TLS tunnel) parameters
458 # (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
459 # "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
460 # Following certificate/private key fields are used in inner Phase2
461 # authentication when using EAP-TTLS or EAP-PEAP.
462 # ca_cert2: File path to CA certificate file. This file can have one or more
463 # trusted CA certificates. If ca_cert2 and ca_path2 are not included,
464 # server certificate will not be verified. This is insecure and a trusted
465 # CA certificate should always be configured.
466 # ca_path2: Directory path for CA certificate files (PEM)
467 # client_cert2: File path to client certificate file
468 # private_key2: File path to client private key file
469 # private_key2_passwd: Password for private key file
470 # dh_file2: File path to DH/DSA parameters file (in PEM format)
471 # subject_match2: Substring to be matched against the subject of the
472 # authentication server certificate.
473 # altsubject_match2: Substring to be matched against the alternative subject
474 # name of the authentication server certificate.
476 # fragment_size: Maximum EAP fragment size in bytes (default 1398).
477 # This value limits the fragment size for EAP methods that support
478 # fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set
479 # small enough to make the EAP messages fit in MTU of the network
480 # interface used for EAPOL. The default value is suitable for most
483 # EAP-FAST variables:
484 # pac_file: File path for the PAC entries. wpa_supplicant will need to be able
485 # to create this file and write updates to it when PAC is being
486 # provisioned or refreshed. Full path to the file should be used since
487 # working directory may change when wpa_supplicant is run in the
488 # background. Alternatively, a named configuration blob can be used by
489 # setting this to blob://<blob name>
490 # phase1: fast_provisioning option can be used to enable in-line provisioning
491 # of EAP-FAST credentials (PAC):
493 # 1 = allow unauthenticated provisioning,
494 # 2 = allow authenticated provisioning,
495 # 3 = allow both unauthenticated and authenticated provisioning
496 # fast_max_pac_list_len=<num> option can be used to set the maximum
497 # number of PAC entries to store in a PAC list (default: 10)
498 # fast_pac_format=binary option can be used to select binary format for
499 # storing PAC entries in order to save some space (the default
500 # text format uses about 2.5 times the size of minimal binary
503 # wpa_supplicant supports number of "EAP workarounds" to work around
504 # interoperability issues with incorrectly behaving authentication servers.
505 # These are enabled by default because some of the issues are present in large
506 # number of authentication servers. Strict EAP conformance mode can be
507 # configured by disabling workarounds with eap_workaround=0.
511 # Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
514 psk="very secret passphrase"
518 # Same as previous, but request SSID-specific scanning (for APs that reject
523 psk="very secret passphrase"
527 # Only WPA-PSK is used. Any valid cipher combination is accepted.
533 group=CCMP TKIP WEP104 WEP40
534 psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
538 # WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying
545 psk="not so secure passphrase"
549 # Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
550 # or WEP40 as the group cipher will not be accepted.
558 identity="user@example.com"
559 ca_cert="/etc/cert/ca.pem"
560 client_cert="/etc/cert/user.pem"
561 private_key="/etc/cert/user.prv"
562 private_key_passwd="password"
566 # EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
572 identity="user@example.com"
574 ca_cert="/etc/cert/ca.pem"
576 phase2="auth=MSCHAPV2"
580 # EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
581 # unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
586 identity="user@example.com"
587 anonymous_identity="anonymous@example.com"
589 ca_cert="/etc/cert/ca.pem"
593 # EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
594 # use. Real identity is sent only within an encrypted TLS tunnel.
599 identity="user@example.com"
600 anonymous_identity="anonymous@example.com"
602 ca_cert="/etc/cert/ca.pem"
603 phase2="auth=MSCHAPV2"
606 # WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
612 # Phase1 / outer authentication
613 anonymous_identity="anonymous@example.com"
614 ca_cert="/etc/cert/ca.pem"
615 # Phase 2 / inner authentication
617 ca_cert2="/etc/cert/ca2.pem"
618 client_cert2="/etc/cer/user.pem"
619 private_key2="/etc/cer/user.prv"
620 private_key2_passwd="password"
624 # Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
628 bssid=00:11:22:33:44:55
630 key_mgmt=WPA-PSK WPA-EAP
633 psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
636 # Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
637 # and all valid ciphers.
640 psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
644 # EAP-SIM with a GSM SIM or USIM
659 anonymous_identity="eap_psk_user"
660 password=06b4be19da289f475aa46a33cb793029
661 identity="eap_psk_user@example.com"
665 # IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
666 # EAP-TLS for authentication and key generation; require both unicast and
667 # broadcast WEP keys.
672 identity="user@example.com"
673 ca_cert="/etc/cert/ca.pem"
674 client_cert="/etc/cert/user.pem"
675 private_key="/etc/cert/user.prv"
676 private_key_passwd="password"
681 # LEAP with dynamic WEP keys
690 # EAP-IKEv2 using shared secrets for both server and peer authentication
699 # EAP-FAST with WPA (WPA or WPA2)
704 anonymous_identity="FAST-000102030405"
707 phase1="fast_provisioning=1"
708 pac_file="/etc/wpa_supplicant.eap-fast-pac"
715 anonymous_identity="FAST-000102030405"
718 phase1="fast_provisioning=1"
719 pac_file="blob://eap-fast-pac"
722 # Plaintext connection (no WPA, no IEEE 802.1X)
724 ssid="plaintext-test"
729 # Shared WEP key connection (no WPA, no IEEE 802.1X)
731 ssid="static-wep-test"
735 wep_key2="1234567890123"
741 # Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
742 # IEEE 802.11 authentication
744 ssid="static-wep-test2"
748 wep_key2="1234567890123"
755 # IBSS/ad-hoc network with WPA-None/TKIP.
764 psk="secret passphrase"
768 # Catch all example that allows more or less all configuration modes
772 key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
774 group=CCMP TKIP WEP104 WEP40
775 psk="very secret passphrase"
777 identity="user@example.com"
779 ca_cert="/etc/cert/ca.pem"
780 client_cert="/etc/cert/user.pem"
781 private_key="/etc/cert/user.prv"
782 private_key_passwd="password"
786 # Example of EAP-TLS with smartcard (openssl engine)
794 identity="user@example.com"
795 ca_cert="/etc/cert/ca.pem"
796 client_cert="/etc/cert/user.pem"
800 # The engine configured here must be available. Look at
801 # OpenSSL engine support in the global section.
802 # The key available through the engine must be the private key
803 # matching the client certificate configured above.
805 # use the opensc engine
809 # use the pkcs11 engine
813 # Optional PIN configuration; this can be left out and PIN will be
814 # asked through the control interface
818 # Example configuration showing how to use an inlined blob as a CA certificate
819 # data instead of using external file
824 identity="user@example.com"
825 anonymous_identity="anonymous@example.com"
827 ca_cert="blob://exampleblob"
831 blob-base64-exampleblob={
836 # Wildcard match for SSID (plaintext APs only). This example select any
837 # open AP regardless of its SSID.