1 # Example wpa_supplicant build time configuration
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cases, these lines should use += in order not
10 # to override previous values of the variables.
13 # Uncomment following two lines and fix the paths if you have installed OpenSSL
14 # or GnuTLS in non-default location
15 #CFLAGS += -I/usr/local/openssl/include
16 #LIBS += -L/usr/local/openssl/lib
18 # Some Red Hat versions seem to include kerberos header files from OpenSSL, but
19 # the kerberos files are not in the default include path. Following line can be
20 # used to fix build issues on such systems (krb5.h not found).
21 #CFLAGS += -I/usr/include/kerberos
23 # Example configuration for various cross-compilation platforms
25 #### sveasoft (e.g., for Linksys WRT54G) ######################################
27 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
29 #CPPFLAGS += -I../src/include -I../../src/router/openssl/include
30 #LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
31 ###############################################################################
33 #### openwrt (e.g., for Linksys WRT54G) #######################################
35 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
37 #CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
38 # -I../WRT54GS/release/src/include
40 ###############################################################################
43 # Driver interface for Host AP driver
44 CONFIG_DRIVER_HOSTAP=y
46 # Driver interface for Agere driver
47 #CONFIG_DRIVER_HERMES=y
48 # Change include directories to match with the local setup
49 #CFLAGS += -I../../hcf -I../../include -I../../include/hcf
50 #CFLAGS += -I../../include/wireless
52 # Driver interface for madwifi driver
53 #CONFIG_DRIVER_MADWIFI=y
54 # Set include directory to the madwifi source tree
55 #CFLAGS += -I../../madwifi
57 # Driver interface for Prism54 driver
58 # (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
59 # for developers only)
60 #CONFIG_DRIVER_PRISM54=y
62 # Driver interface for ndiswrapper
63 #CONFIG_DRIVER_NDISWRAPPER=y
65 # Driver interface for Atmel driver
68 # Driver interface for old Broadcom driver
69 # Please note that the newer Broadcom driver ("hybrid Linux driver") supports
70 # Linux wireless extensions and does not need (or even work) with the old
71 # driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
72 #CONFIG_DRIVER_BROADCOM=y
73 # Example path for wlioctl.h; change to match your configuration
74 #CFLAGS += -I/opt/WRT54GS/release/src/include
76 # Driver interface for Intel ipw2100/2200 driver
79 # Driver interface for Ralink driver
80 #CONFIG_DRIVER_RALINK=y
82 # Driver interface for generic Linux wireless extensions
85 # Driver interface for Linux drivers using the nl80211 kernel interface
86 #CONFIG_DRIVER_NL80211=y
88 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
90 #CFLAGS += -I/usr/local/include
91 #LIBS += -L/usr/local/lib
93 # Driver interface for Windows NDIS
95 #CFLAGS += -I/usr/include/w32api/ddk
96 #LIBS += -L/usr/local/lib
97 # For native build using mingw
98 #CONFIG_NATIVE_WINDOWS=y
99 # Additional directories for cross-compilation on Linux host for mingw target
100 #CFLAGS += -I/opt/mingw/mingw32/include/ddk
101 #LIBS += -L/opt/mingw/mingw32/lib
103 # By default, driver_ndis uses WinPcap for low-level operations. This can be
104 # replaced with the following option which replaces WinPcap calls with NDISUIO.
105 # However, this requires that WZC is disabled (net stop wzcsvc) before starting
107 # CONFIG_USE_NDISUIO=y
109 # Driver interface for development testing
110 #CONFIG_DRIVER_TEST=y
112 # Include client MLME (management frame processing) for test driver
113 # This can be used to test MLME operations in hostapd with the test interface.
115 #CONFIG_CLIENT_MLME=y
117 # Driver interface for wired Ethernet drivers
118 CONFIG_DRIVER_WIRED=y
120 # Driver interface for the Broadcom RoboSwitch family
121 #CONFIG_DRIVER_ROBOSWITCH=y
123 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
125 CONFIG_IEEE8021X_EAPOL=y
131 CONFIG_EAP_MSCHAPV2=y
143 # Note: Default OpenSSL package does not include support for all the
144 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
145 # the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
146 # to add the needed functions.
155 # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
158 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
167 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
170 # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
171 # This requires CONFIG_EAP_AKA to be enabled, too.
172 #CONFIG_EAP_AKA_PRIME=y
174 # Enable USIM simulator (Milenage) for EAP-AKA
175 #CONFIG_USIM_SIMULATOR=y
182 # Include support for optional SHA256 cipher suite in EAP-GPSK
183 #CONFIG_EAP_GPSK_SHA256=y
185 # EAP-TNC and related Trusted Network Connect support (experimental)
188 # Wi-Fi Protected Setup (WPS)
194 # PKCS#12 (PFX) support (used to read private key and certificate file from
195 # a file that usually has extension .p12 or .pfx)
198 # Smartcard support (i.e., private key on a smartcard), e.g., with openssl
202 # PC/SC interface for smartcards (USIM, GSM SIM)
203 # Enable this if EAP-SIM or EAP-AKA is included
206 # Development testing
209 # Select control interface backend for external programs, e.g, wpa_cli:
210 # unix = UNIX domain sockets (default for Linux/*BSD)
211 # udp = UDP sockets using localhost (127.0.0.1)
212 # named_pipe = Windows Named Pipe (default for Windows)
213 # y = use default (backwards compatibility)
214 # If this option is commented out, control interface is not included in the
218 # Include support for GNU Readline and History Libraries in wpa_cli.
219 # When building a wpa_cli binary for distribution, please note that these
220 # libraries are licensed under GPL and as such, BSD license may not apply for
221 # the resulting binary.
224 # Remove debugging code that is printing out debug message to stdout.
225 # This can be used to reduce the size of the wpa_supplicant considerably
226 # if debugging code is not needed. The size reduction can be around 35%
228 #CONFIG_NO_STDOUT_DEBUG=y
230 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
231 # 35-50 kB in code size.
234 # Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
235 # save about 1 kB in code size when building only WPA-Personal (no EAP support)
236 # or 6 kB if building for WPA-Enterprise.
239 # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
240 # This option can be used to reduce code size by removing support for
241 # converting ASCII passphrases into PSK. If this functionality is removed, the
242 # PSK can only be configured as the 64-octet hexstring (e.g., from
243 # wpa_passphrase). This saves about 0.5 kB in code size.
244 #CONFIG_NO_WPA_PASSPHRASE=y
246 # Remove AES extra functions. This can be used to reduce code size by about
247 # 1.5 kB by removing extra AES modes that are not needed for commonly used
248 # client configurations (they are needed for some EAP types).
249 #CONFIG_NO_AES_EXTRAS=y
251 # Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
252 # This can be used if ap_scan=1 mode is never enabled.
253 #CONFIG_NO_SCAN_PROCESSING=y
255 # Select configuration backend:
256 # file = text file (e.g., wpa_supplicant.conf; note: the configuration file
257 # path is given on command line, not here; this option is just used to
258 # select the backend that allows configuration files to be used)
259 # winreg = Windows registry (see win_example.reg for an example)
262 # Remove configuration write functionality (i.e., to allow the configuration
263 # file to be updated based on runtime configuration changes). The runtime
264 # configuration can still be changed, the changes are just not going to be
265 # persistent over restarts. This option can be used to reduce code size by
267 #CONFIG_NO_CONFIG_WRITE=y
269 # Remove support for configuration blobs to reduce code size by about 1.5 kB.
270 #CONFIG_NO_CONFIG_BLOBS=y
272 # Select program entry point implementation:
273 # main = UNIX/POSIX like main() function (default)
274 # main_winsvc = Windows service (read parameters from registry)
275 # main_none = Very basic example (development use only)
278 # Select wrapper for operatins system and C library specific functions
279 # unix = UNIX/POSIX like systems (default)
280 # win32 = Windows systems
281 # none = Empty template
284 # Select event loop implementation
285 # eloop = select() loop (default)
286 # eloop_win = Windows events and WaitForMultipleObject() loop
287 # eloop_none = Empty template
290 # Select layer 2 packet implementation
291 # linux = Linux packet socket (default)
292 # pcap = libpcap/libdnet/WinPcap
293 # freebsd = FreeBSD libpcap
294 # winpcap = WinPcap with receive thread
295 # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
296 # none = Empty template
297 #CONFIG_L2_PACKET=linux
299 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
302 # IEEE 802.11w (management frame protection)
303 # This version is an experimental implementation based on IEEE 802.11w/D1.0
304 # draft and is subject to change since the standard has not yet been finalized.
305 # Driver support is also needed for IEEE 802.11w.
308 # Select TLS implementation
309 # openssl = OpenSSL (default)
310 # gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
311 # internal = Internal TLSv1 implementation (experimental)
312 # none = Empty template
315 # Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
316 # You need CONFIG_TLS=gnutls for this to have any effect. Please note that
317 # even though the core GnuTLS library is released under LGPL, this extra
318 # library uses GPL and as such, the terms of GPL apply to the combination
319 # of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
320 # apply for distribution of the resulting binary.
321 #CONFIG_GNUTLS_EXTRA=y
323 # If CONFIG_TLS=internal is used, additional library and include paths are
324 # needed for LibTomMath. Alternatively, an integrated, minimal version of
325 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
326 # and drawbacks of this option.
327 #CONFIG_INTERNAL_LIBTOMMATH=y
328 #ifndef CONFIG_INTERNAL_LIBTOMMATH
329 #LTM_PATH=/usr/src/libtommath-0.39
330 #CFLAGS += -I$(LTM_PATH)
331 #LIBS += -L$(LTM_PATH)
332 #LIBS_p += -L$(LTM_PATH)
334 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
335 # can be configured to include faster routines for exptmod, sqr, and div to
336 # speed up DH and RSA calculation considerably
337 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y
339 # Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
340 # This is only for Windows builds and requires WMI-related header files and
341 # WbemUuid.Lib from Platform SDK even when building with MinGW.
342 #CONFIG_NDIS_EVENTS_INTEGRATED=y
343 #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
345 # Add support for DBus control interface
346 #CONFIG_CTRL_IFACE_DBUS=y
348 # Add support for loading EAP methods dynamically as shared libraries.
349 # When this option is enabled, each EAP method can be either included
350 # statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
351 # Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
352 # be loaded in the beginning of the wpa_supplicant configuration file
353 # (see load_dynamic_eap parameter in the example file) before being used in
354 # the network blocks.
356 # Note that some shared parts of EAP methods are included in the main program
357 # and in order to be able to use dynamic EAP methods using these parts, the
358 # main program must have been build with the EAP method enabled (=y or =dyn).
359 # This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
360 # unless at least one of them was included in the main build to force inclusion
361 # of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
362 # in the main build to be able to load these methods dynamically.
364 # Please also note that using dynamic libraries will increase the total binary
365 # size. Thus, it may not be the best option for targets that have limited
366 # amount of memory/flash.
367 #CONFIG_DYNAMIC_EAP_METHODS=y
369 # IEEE Std 802.11r-2008 (Fast BSS Transition)
372 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
375 # Enable privilege separation (see README 'Privilege separation' for details)
378 # Enable mitigation against certain attacks against TKIP by delaying Michael
379 # MIC error reports by a random amount of time between 0 and 60 seconds
380 #CONFIG_DELAYED_MIC_ERROR_REPORT=y