1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 # -*- mode: Makefile; c-basic-offset: 4; tab-width: 4; indent-tabs-mode: t -*-
20 # Conky, a system monitor, based on torsmo
22 # Any original torsmo code is licensed under the BSD license
24 # All code written since the fork of torsmo is licensed under the GPL
26 # Please see COPYING for details
28 # Copyright (c) 2004, Hannu Saransaari and Lauri Hakkarainen
29 # Copyright (c) 2005-2010 Brenden Matthews, Philip Kovacs, et. al. (see AUTHORS)
30 # All rights reserved.
32 # This program is free software: you can redistribute it and/or modify
33 # it under the terms of the GNU General Public License as published by
34 # the Free Software Foundation, either version 3 of the License, or
35 # (at your option) any later version.
37 # This program is distributed in the hope that it will be useful,
38 # but WITHOUT ANY WARRANTY; without even the implied warranty of
39 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
40 # GNU General Public License for more details.
41 # You should have received a copy of the GNU General Public License
42 # along with this program. If not, see <http://www.gnu.org/licenses/>.
46 pkgdatadir = $(datadir)/@PACKAGE@
47 pkgincludedir = $(includedir)/@PACKAGE@
48 pkglibdir = $(libdir)/@PACKAGE@
49 pkglibexecdir = $(libexecdir)/@PACKAGE@
50 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
51 install_sh_DATA = $(install_sh) -c -m 644
52 install_sh_PROGRAM = $(install_sh) -c
53 install_sh_SCRIPT = $(install_sh) -c
54 INSTALL_HEADER = $(INSTALL_DATA)
55 transform = $(program_transform_name)
62 build_triplet = @build@
65 DIST_COMMON = $(dist_config_DATA) $(srcdir)/Makefile.am \
67 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
68 am__aclocal_m4_deps = $(top_srcdir)/m4/pkg.m4 \
69 $(top_srcdir)/configure.ac
70 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
72 mkinstalldirs = $(install_sh) -d
73 CONFIG_HEADER = $(top_builddir)/src/config.h
75 CONFIG_CLEAN_VPATH_FILES =
78 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
79 am__vpath_adj = case $$p in \
80 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
83 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
85 am__nobase_strip_setup = \
86 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
88 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
89 am__nobase_list = $(am__nobase_strip_setup); \
90 for p in $$list; do echo "$$p $$p"; done | \
91 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
92 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
93 if (++n[$$2] == $(am__install_max)) \
94 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
95 END { for (dir in files) print dir, files[dir] }'
97 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
98 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
99 am__installdirs = "$(DESTDIR)$(configdir)"
100 DATA = $(dist_config_DATA)
101 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
105 AUTOCONF = @AUTOCONF@
106 AUTOHEADER = @AUTOHEADER@
107 AUTOMAKE = @AUTOMAKE@
109 Audacious_CFLAGS = @Audacious_CFLAGS@
110 Audacious_LIBS = @Audacious_LIBS@
111 BMPx_CFLAGS = @BMPx_CFLAGS@
112 BMPx_LIBS = @BMPx_LIBS@
113 BUILD_ARCH = @BUILD_ARCH@
114 BUILD_DATE = @BUILD_DATE@
116 CCDEPMODE = @CCDEPMODE@
119 CPPFLAGS = @CPPFLAGS@
120 CYGPATH_W = @CYGPATH_W@
123 DSYMUTIL = @DSYMUTIL@
131 GLib2_CFLAGS = @GLib2_CFLAGS@
132 GLib2_LIBS = @GLib2_LIBS@
134 HAVE_PKGCONFIG = @HAVE_PKGCONFIG@
136 INSTALL_DATA = @INSTALL_DATA@
137 INSTALL_PROGRAM = @INSTALL_PROGRAM@
138 INSTALL_SCRIPT = @INSTALL_SCRIPT@
139 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
140 Imlib2_CFLAGS = @Imlib2_CFLAGS@
141 Imlib2_LIBS = @Imlib2_LIBS@
144 LIBICONV = @LIBICONV@
150 LTLIBICONV = @LTLIBICONV@
151 LTLIBOBJS = @LTLIBOBJS@
152 LUA51_CFLAGS = @LUA51_CFLAGS@
153 LUA51_LIBS = @LUA51_LIBS@
154 LUA_CFLAGS = @LUA_CFLAGS@
155 LUA_LIBS = @LUA_LIBS@
156 MAKEINFO = @MAKEINFO@
165 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
166 PACKAGE_NAME = @PACKAGE_NAME@
167 PACKAGE_STRING = @PACKAGE_STRING@
168 PACKAGE_TARNAME = @PACKAGE_TARNAME@
169 PACKAGE_URL = @PACKAGE_URL@
170 PACKAGE_VERSION = @PACKAGE_VERSION@
171 PATH_SEPARATOR = @PATH_SEPARATOR@
172 PKG_CONFIG = @PKG_CONFIG@
175 SET_MAKE = @SET_MAKE@
179 X11_CFLAGS = @X11_CFLAGS@
180 X11_LIBS = @X11_LIBS@
181 XDamage_CFLAGS = @XDamage_CFLAGS@
182 XDamage_LIBS = @XDamage_LIBS@
184 XMMS2_CFLAGS = @XMMS2_CFLAGS@
185 XMMS2_LIBS = @XMMS2_LIBS@
186 X_CFLAGS = @X_CFLAGS@
187 X_EXTRA_LIBS = @X_EXTRA_LIBS@
189 X_PRE_LIBS = @X_PRE_LIBS@
190 Xext_CFLAGS = @Xext_CFLAGS@
191 Xext_LIBS = @Xext_LIBS@
192 Xft_CFLAGS = @Xft_CFLAGS@
193 Xft_LIBS = @Xft_LIBS@
194 abs_builddir = @abs_builddir@
195 abs_srcdir = @abs_srcdir@
196 abs_top_builddir = @abs_top_builddir@
197 abs_top_srcdir = @abs_top_srcdir@
198 ac_ct_CC = @ac_ct_CC@
199 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
200 am__include = @am__include@
201 am__leading_dot = @am__leading_dot@
202 am__quote = @am__quote@
204 am__untar = @am__untar@
207 build_alias = @build_alias@
208 build_cpu = @build_cpu@
209 build_os = @build_os@
210 build_vendor = @build_vendor@
211 builddir = @builddir@
212 cairo_CFLAGS = @cairo_CFLAGS@
213 cairo_LIBS = @cairo_LIBS@
214 cairo_xlib_CFLAGS = @cairo_xlib_CFLAGS@
215 cairo_xlib_LIBS = @cairo_xlib_LIBS@
216 conky_CFLAGS = @conky_CFLAGS@
217 conky_LIBS = @conky_LIBS@
219 datarootdir = @datarootdir@
220 db2x_manxml_cmd = @db2x_manxml_cmd@
221 db2x_xsltproc_cmd = @db2x_xsltproc_cmd@
224 exec_prefix = @exec_prefix@
226 host_alias = @host_alias@
227 host_cpu = @host_cpu@
229 host_vendor = @host_vendor@
231 includedir = @includedir@
233 install_sh = @install_sh@
234 libcurl_CFLAGS = @libcurl_CFLAGS@
235 libcurl_LIBS = @libcurl_LIBS@
237 libexecdir = @libexecdir@
238 libxml2_CFLAGS = @libxml2_CFLAGS@
239 libxml2_LIBS = @libxml2_LIBS@
240 localedir = @localedir@
241 localstatedir = @localstatedir@
245 oldincludedir = @oldincludedir@
248 program_transform_name = @program_transform_name@
251 sharedstatedir = @sharedstatedir@
253 sysconfdir = @sysconfdir@
254 target_alias = @target_alias@
255 tolua_CFLAGS = @tolua_CFLAGS@
256 tolua_LIBS = @tolua_LIBS@
258 top_build_prefix = @top_build_prefix@
259 top_builddir = @top_builddir@
260 top_srcdir = @top_srcdir@
261 xsltproc_cmd = @xsltproc_cmd@
262 configdir = ${sysconfdir}/conky
263 dist_config_DATA = bargraph_eng.lua box.lua conky.conf conky.conf.nolua graph.lua LoadAll.lua luatraverse.lua misc.lua n950-kobol.jpg piechart.lua strict.lua testCairo.lua text.lua
267 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
269 case '$(am__configure_deps)' in \
271 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
272 && { if test -f $@; then exit 0; else break; fi; }; \
276 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu data/Makefile'; \
277 $(am__cd) $(top_srcdir) && \
278 $(AUTOMAKE) --gnu data/Makefile
280 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
283 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
285 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
286 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
289 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
290 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
292 $(top_srcdir)/configure: $(am__configure_deps)
293 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
294 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
295 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
296 $(am__aclocal_m4_deps):
303 install-dist_configDATA: $(dist_config_DATA)
305 test -z "$(configdir)" || $(MKDIR_P) "$(DESTDIR)$(configdir)"
306 @list='$(dist_config_DATA)'; test -n "$(configdir)" || list=; \
307 for p in $$list; do \
308 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
310 done | $(am__base_list) | \
311 while read files; do \
312 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(configdir)'"; \
313 $(INSTALL_DATA) $$files "$(DESTDIR)$(configdir)" || exit $$?; \
316 uninstall-dist_configDATA:
318 @list='$(dist_config_DATA)'; test -n "$(configdir)" || list=; \
319 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
320 test -n "$$files" || exit 0; \
321 echo " ( cd '$(DESTDIR)$(configdir)' && rm -f" $$files ")"; \
322 cd "$(DESTDIR)$(configdir)" && rm -f $$files
330 distdir: $(DISTFILES)
331 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
332 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
333 list='$(DISTFILES)'; \
334 dist_files=`for file in $$list; do echo $$file; done | \
335 sed -e "s|^$$srcdirstrip/||;t" \
336 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
337 case $$dist_files in \
338 */*) $(MKDIR_P) `echo "$$dist_files" | \
339 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
342 for file in $$dist_files; do \
343 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
344 if test -d $$d/$$file; then \
345 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
346 if test -d "$(distdir)/$$file"; then \
347 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
349 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
350 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
351 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
353 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
355 test -f "$(distdir)/$$file" \
356 || cp -p $$d/$$file "$(distdir)/$$file" \
362 all-am: Makefile $(DATA)
364 for dir in "$(DESTDIR)$(configdir)"; do \
365 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
368 install-exec: install-exec-am
369 install-data: install-data-am
370 uninstall: uninstall-am
373 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
375 installcheck: installcheck-am
377 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
378 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
379 `test -z '$(STRIP)' || \
380 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
386 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
387 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
389 maintainer-clean-generic:
390 @echo "This command is intended for maintainers to use"
391 @echo "it deletes files that may require special tools to rebuild."
394 clean-am: clean-generic clean-libtool mostlyclean-am
396 distclean: distclean-am
398 distclean-am: clean-am distclean-generic
412 install-data-am: install-dist_configDATA
414 install-dvi: install-dvi-am
420 install-html: install-html-am
424 install-info: install-info-am
430 install-pdf: install-pdf-am
434 install-ps: install-ps-am
440 maintainer-clean: maintainer-clean-am
442 maintainer-clean-am: distclean-am maintainer-clean-generic
444 mostlyclean: mostlyclean-am
446 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
456 uninstall-am: uninstall-dist_configDATA
458 .MAKE: install-am install-strip
460 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
461 distclean distclean-generic distclean-libtool distdir dvi \
462 dvi-am html html-am info info-am install install-am \
463 install-data install-data-am install-dist_configDATA \
464 install-dvi install-dvi-am install-exec install-exec-am \
465 install-html install-html-am install-info install-info-am \
466 install-man install-pdf install-pdf-am install-ps \
467 install-ps-am install-strip installcheck installcheck-am \
468 installdirs maintainer-clean maintainer-clean-generic \
469 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
470 ps ps-am uninstall uninstall-am uninstall-dist_configDATA
473 # vi:set ts=4 sw=4 noet ai nocindent syntax=automake:
475 # Tell versions [3.59,3.63) of GNU make to not export all variables.
476 # Otherwise a system limit (for SysV at least) may be exceeded.