--- /dev/null
+#ifndef __LINUX_NL80211_H
+#define __LINUX_NL80211_H
+/*
+ * 802.11 netlink interface public header
+ *
+ * Copyright 2006, 2007, 2008 Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
+ * Copyright 2008 Michael Buesch <mb@bu3sch.de>
+ * Copyright 2008 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/**
+ * DOC: Station handling
+ *
+ * Stations are added per interface, but a special case exists with VLAN
+ * interfaces. When a station is bound to an AP interface, it may be moved
+ * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
+ * The station is still assumed to belong to the AP interface it was added
+ * to.
+ *
+ * TODO: need more info?
+ */
+
+/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+ *
+ * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
+ * to get a list of all present wiphys.
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
+ * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or
+ * %NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET.
+ * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
+ * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
+ * %NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
+ * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
+ *
+ * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
+ * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
+ * on an %NL80211_ATTR_IFINDEX is supported.
+ * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
+ * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
+ * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
+ * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
+ * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
+ * be sent from userspace to request creation of a new virtual interface,
+ * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
+ * %NL80211_ATTR_IFNAME.
+ * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
+ * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
+ * userspace to request deletion of a virtual interface, then requires
+ * attribute %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
+ * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
+ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or
+ * %NL80211_ATTR_KEY_THRESHOLD.
+ * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
+ * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
+ * attributes.
+ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
+ * or %NL80211_ATTR_MAC.
+ *
+ * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
+ * %NL80222_CMD_NEW_BEACON message)
+ * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
+ * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
+ * %NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes.
+ * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
+ * parameters are like for %NL80211_CMD_SET_BEACON.
+ * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
+ *
+ * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
+ * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
+ * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
+ * the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
+ * or, if no MAC address given, all stations, on the interface identified
+ * by %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
+ * destination %NL80211_ATTR_MAC on the interface identified by
+ * %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
+ * destination %NL80211_ATTR_MAC on the interface identified by
+ * %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
+ * the interface identified by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
+ * or, if no MAC address given, all mesh paths, on the interface identified
+ * by %NL80211_ATTR_IFINDEX.
+ * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
+ * %NL80211_ATTR_IFINDEX.
+ *
+ * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
+ * after being queried by the kernel. CRDA replies by sending a regulatory
+ * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
+ * current alpha2 if it found a match. It also provides
+ * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
+ * regulatory rule is a nested set of attributes given by
+ * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
+ * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
+ * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
+ * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
+ * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
+ * store this as a valid request and then query userspace for it.
+ *
+ * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
+ * interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
+ * interface identified by %NL80211_ATTR_IFINDEX
+ *
+ * @NL80211_CMD_MAX: highest used command number
+ * @__NL80211_CMD_AFTER_LAST: internal use
+ */
+enum nl80211_commands {
+/* don't change the order or add anything inbetween, this is ABI! */
+ NL80211_CMD_UNSPEC,
+
+ NL80211_CMD_GET_WIPHY, /* can dump */
+ NL80211_CMD_SET_WIPHY,
+ NL80211_CMD_NEW_WIPHY,
+ NL80211_CMD_DEL_WIPHY,
+
+ NL80211_CMD_GET_INTERFACE, /* can dump */
+ NL80211_CMD_SET_INTERFACE,
+ NL80211_CMD_NEW_INTERFACE,
+ NL80211_CMD_DEL_INTERFACE,
+
+ NL80211_CMD_GET_KEY,
+ NL80211_CMD_SET_KEY,
+ NL80211_CMD_NEW_KEY,
+ NL80211_CMD_DEL_KEY,
+
+ NL80211_CMD_GET_BEACON,
+ NL80211_CMD_SET_BEACON,
+ NL80211_CMD_NEW_BEACON,
+ NL80211_CMD_DEL_BEACON,
+
+ NL80211_CMD_GET_STATION,
+ NL80211_CMD_SET_STATION,
+ NL80211_CMD_NEW_STATION,
+ NL80211_CMD_DEL_STATION,
+
+ NL80211_CMD_GET_MPATH,
+ NL80211_CMD_SET_MPATH,
+ NL80211_CMD_NEW_MPATH,
+ NL80211_CMD_DEL_MPATH,
+
+ NL80211_CMD_SET_BSS,
+
+ NL80211_CMD_SET_REG,
+ NL80211_CMD_REQ_SET_REG,
+
+ NL80211_CMD_GET_MESH_PARAMS,
+ NL80211_CMD_SET_MESH_PARAMS,
+
+ /* add new commands above here */
+
+ /* used to define NL80211_CMD_MAX below */
+ __NL80211_CMD_AFTER_LAST,
+ NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
+};
+
+/*
+ * Allow user space programs to use #ifdef on new commands by defining them
+ * here
+ */
+#define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
+
+/**
+ * enum nl80211_attrs - nl80211 netlink attributes
+ *
+ * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
+ *
+ * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
+ * /sys/class/ieee80211/<phyname>/index
+ * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
+ * @NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET: included with NL80211_ATTR_WIPHY_FREQ
+ * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
+ * NL80211_SEC_CHAN_NO_HT = HT not allowed (i.e., same as not including
+ * this attribute)
+ * NL80211_SEC_CHAN_DISABLED = HT20 only
+ * NL80211_SEC_CHAN_BELOW = secondary channel is below the primary channel
+ * NL80211_SEC_CHAN_ABOVE = secondary channel is above the primary channel
+ *
+ * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
+ * @NL80211_ATTR_IFNAME: network interface name
+ * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
+ *
+ * @NL80211_ATTR_MAC: MAC address (various uses)
+ *
+ * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
+ * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
+ * keys
+ * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
+ * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
+ * section 7.3.2.25.1, e.g. 0x000FAC04)
+ * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
+ * CCMP keys, each six bytes in little endian
+ *
+ * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
+ * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
+ * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
+ * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
+ *
+ * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
+ * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
+ * &enum nl80211_sta_flags.
+ * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
+ * IEEE 802.11 7.3.1.6 (u16).
+ * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
+ * rates as defined by IEEE 802.11 7.3.2.2 but without the length
+ * restriction (at most %NL80211_MAX_SUPP_RATES).
+ * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
+ * to, or the AP interface the station was originally added to to.
+ * @NL80211_ATTR_STA_INFO: information about a station, part of station info
+ * given for %NL80211_CMD_GET_STATION, nested attribute containing
+ * info as possible, see &enum nl80211_sta_info.
+ *
+ * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
+ * consisting of a nested array.
+ *
+ * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
+ * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
+ * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
+ * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
+ * &enum nl80211_mpath_info.
+ *
+ * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
+ * &enum nl80211_mntr_flags.
+ *
+ * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
+ * current regulatory domain should be set to or is already set to.
+ * For example, 'CR', for Costa Rica. This attribute is used by the kernel
+ * to query the CRDA to retrieve one regulatory domain. This attribute can
+ * also be used by userspace to query the kernel for the currently set
+ * regulatory domain. We chose an alpha2 as that is also used by the
+ * IEEE-802.11d country information element to identify a country.
+ * Users can also simply ask the wireless core to set regulatory domain
+ * to a specific alpha2.
+ * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
+ * rules.
+ *
+ * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
+ * (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
+ * (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ * restriction (at most %NL80211_MAX_SUPP_RATES).
+ *
+ * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
+ * association request when used with NL80211_CMD_NEW_STATION)
+ *
+ * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
+ * supported interface types, each a flag attribute with the number
+ * of the interface mode.
+ *
+ * @NL80211_ATTR_MAX: highest attribute number currently defined
+ * @__NL80211_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_attrs {
+/* don't change the order or add anything inbetween, this is ABI! */
+ NL80211_ATTR_UNSPEC,
+
+ NL80211_ATTR_WIPHY,
+ NL80211_ATTR_WIPHY_NAME,
+
+ NL80211_ATTR_IFINDEX,
+ NL80211_ATTR_IFNAME,
+ NL80211_ATTR_IFTYPE,
+
+ NL80211_ATTR_MAC,
+
+ NL80211_ATTR_KEY_DATA,
+ NL80211_ATTR_KEY_IDX,
+ NL80211_ATTR_KEY_CIPHER,
+ NL80211_ATTR_KEY_SEQ,
+ NL80211_ATTR_KEY_DEFAULT,
+
+ NL80211_ATTR_BEACON_INTERVAL,
+ NL80211_ATTR_DTIM_PERIOD,
+ NL80211_ATTR_BEACON_HEAD,
+ NL80211_ATTR_BEACON_TAIL,
+
+ NL80211_ATTR_STA_AID,
+ NL80211_ATTR_STA_FLAGS,
+ NL80211_ATTR_STA_LISTEN_INTERVAL,
+ NL80211_ATTR_STA_SUPPORTED_RATES,
+ NL80211_ATTR_STA_VLAN,
+ NL80211_ATTR_STA_INFO,
+
+ NL80211_ATTR_WIPHY_BANDS,
+
+ NL80211_ATTR_MNTR_FLAGS,
+
+ NL80211_ATTR_MESH_ID,
+ NL80211_ATTR_STA_PLINK_ACTION,
+ NL80211_ATTR_MPATH_NEXT_HOP,
+ NL80211_ATTR_MPATH_INFO,
+
+ NL80211_ATTR_BSS_CTS_PROT,
+ NL80211_ATTR_BSS_SHORT_PREAMBLE,
+ NL80211_ATTR_BSS_SHORT_SLOT_TIME,
+
+ NL80211_ATTR_HT_CAPABILITY,
+
+ NL80211_ATTR_SUPPORTED_IFTYPES,
+
+ NL80211_ATTR_REG_ALPHA2,
+ NL80211_ATTR_REG_RULES,
+
+ NL80211_ATTR_MESH_PARAMS,
+
+ NL80211_ATTR_BSS_BASIC_RATES,
+
+ NL80211_ATTR_WIPHY_TXQ_PARAMS,
+ NL80211_ATTR_WIPHY_FREQ,
+ NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET,
+
+ /* add attributes here, update the policy in nl80211.c */
+
+ __NL80211_ATTR_AFTER_LAST,
+ NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
+};
+
+/*
+ * Allow user space programs to use #ifdef on new attributes by defining them
+ * here
+ */
+#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
+#define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
+#define NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET
+
+#define NL80211_MAX_SUPP_RATES 32
+#define NL80211_MAX_SUPP_REG_RULES 32
+#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
+#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
+#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
+#define NL80211_HT_CAPABILITY_LEN 26
+
+/**
+ * enum nl80211_iftype - (virtual) interface types
+ *
+ * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
+ * @NL80211_IFTYPE_ADHOC: independent BSS member
+ * @NL80211_IFTYPE_STATION: managed BSS member
+ * @NL80211_IFTYPE_AP: access point
+ * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
+ * @NL80211_IFTYPE_WDS: wireless distribution interface
+ * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
+ * @NL80211_IFTYPE_MESH_POINT: mesh point
+ * @NL80211_IFTYPE_MAX: highest interface type number currently defined
+ * @__NL80211_IFTYPE_AFTER_LAST: internal use
+ *
+ * These values are used with the %NL80211_ATTR_IFTYPE
+ * to set the type of an interface.
+ *
+ */
+enum nl80211_iftype {
+ NL80211_IFTYPE_UNSPECIFIED,
+ NL80211_IFTYPE_ADHOC,
+ NL80211_IFTYPE_STATION,
+ NL80211_IFTYPE_AP,
+ NL80211_IFTYPE_AP_VLAN,
+ NL80211_IFTYPE_WDS,
+ NL80211_IFTYPE_MONITOR,
+ NL80211_IFTYPE_MESH_POINT,
+
+ /* keep last */
+ __NL80211_IFTYPE_AFTER_LAST,
+ NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_flags - station flags
+ *
+ * Station flags. When a station is added to an AP interface, it is
+ * assumed to be already associated (and hence authenticated.)
+ *
+ * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
+ * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
+ * with short barker preamble
+ * @NL80211_STA_FLAG_WME: station is WME/QoS capable
+ */
+enum nl80211_sta_flags {
+ __NL80211_STA_FLAG_INVALID,
+ NL80211_STA_FLAG_AUTHORIZED,
+ NL80211_STA_FLAG_SHORT_PREAMBLE,
+ NL80211_STA_FLAG_WME,
+
+ /* keep last */
+ __NL80211_STA_FLAG_AFTER_LAST,
+ NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_sta_info - station information
+ *
+ * These attribute types are used with %NL80211_ATTR_STA_INFO
+ * when getting information about a station.
+ *
+ * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ */
+enum nl80211_sta_info {
+ __NL80211_STA_INFO_INVALID,
+ NL80211_STA_INFO_INACTIVE_TIME,
+ NL80211_STA_INFO_RX_BYTES,
+ NL80211_STA_INFO_TX_BYTES,
+ NL80211_STA_INFO_LLID,
+ NL80211_STA_INFO_PLID,
+ NL80211_STA_INFO_PLINK_STATE,
+
+ /* keep last */
+ __NL80211_STA_INFO_AFTER_LAST,
+ NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_mpath_flags - nl80211 mesh path flags
+ *
+ * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
+ * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
+ * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN
+ * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
+ * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
+ */
+enum nl80211_mpath_flags {
+ NL80211_MPATH_FLAG_ACTIVE = 1<<0,
+ NL80211_MPATH_FLAG_RESOLVING = 1<<1,
+ NL80211_MPATH_FLAG_DSN_VALID = 1<<2,
+ NL80211_MPATH_FLAG_FIXED = 1<<3,
+ NL80211_MPATH_FLAG_RESOLVED = 1<<4,
+};
+
+/**
+ * enum nl80211_mpath_info - mesh path information
+ *
+ * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
+ * information about a mesh path.
+ *
+ * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
+ * @NL80211_ATTR_MPATH_DSN: destination sequence number
+ * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
+ * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
+ * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
+ * &enum nl80211_mpath_flags;
+ * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
+ * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries
+ */
+enum nl80211_mpath_info {
+ __NL80211_MPATH_INFO_INVALID,
+ NL80211_MPATH_INFO_FRAME_QLEN,
+ NL80211_MPATH_INFO_DSN,
+ NL80211_MPATH_INFO_METRIC,
+ NL80211_MPATH_INFO_EXPTIME,
+ NL80211_MPATH_INFO_FLAGS,
+ NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
+ NL80211_MPATH_INFO_DISCOVERY_RETRIES,
+
+ /* keep last */
+ __NL80211_MPATH_INFO_AFTER_LAST,
+ NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_band_attr - band attributes
+ * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
+ * an array of nested frequency attributes
+ * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
+ * an array of nested bitrate attributes
+ * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
+ * defined in 802.11n
+ * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
+ * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ */
+enum nl80211_band_attr {
+ __NL80211_BAND_ATTR_INVALID,
+ NL80211_BAND_ATTR_FREQS,
+ NL80211_BAND_ATTR_RATES,
+
+ NL80211_BAND_ATTR_HT_MCS_SET,
+ NL80211_BAND_ATTR_HT_CAPA,
+ NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
+ NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
+
+ /* keep last */
+ __NL80211_BAND_ATTR_AFTER_LAST,
+ NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+
+/**
+ * enum nl80211_frequency_attr - frequency attributes
+ * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
+ * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
+ * regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
+ * permitted on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
+ * (100 * dBm).
+ */
+enum nl80211_frequency_attr {
+ __NL80211_FREQUENCY_ATTR_INVALID,
+ NL80211_FREQUENCY_ATTR_FREQ,
+ NL80211_FREQUENCY_ATTR_DISABLED,
+ NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
+ NL80211_FREQUENCY_ATTR_NO_IBSS,
+ NL80211_FREQUENCY_ATTR_RADAR,
+ NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
+
+ /* keep last */
+ __NL80211_FREQUENCY_ATTR_AFTER_LAST,
+ NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
+};
+
+#define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
+
+/**
+ * enum nl80211_bitrate_attr - bitrate attributes
+ * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
+ * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
+ * in 2.4 GHz band.
+ */
+enum nl80211_bitrate_attr {
+ __NL80211_BITRATE_ATTR_INVALID,
+ NL80211_BITRATE_ATTR_RATE,
+ NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
+
+ /* keep last */
+ __NL80211_BITRATE_ATTR_AFTER_LAST,
+ NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_reg_rule_attr - regulatory rule attributes
+ * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
+ * considerations for a given frequency range. These are the
+ * &enum nl80211_reg_rule_flags.
+ * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
+ * rule in KHz. This is not a center of frequency but an actual regulatory
+ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
+ * in KHz. This is not a center a frequency but an actual regulatory
+ * band edge.
+ * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
+ * frequency range, in KHz.
+ * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
+ * for a given frequency range. The value is in mBi (100 * dBi).
+ * If you don't have one then don't send this.
+ * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
+ * a given frequency range. The value is in mBm (100 * dBm).
+ */
+enum nl80211_reg_rule_attr {
+ __NL80211_REG_RULE_ATTR_INVALID,
+ NL80211_ATTR_REG_RULE_FLAGS,
+
+ NL80211_ATTR_FREQ_RANGE_START,
+ NL80211_ATTR_FREQ_RANGE_END,
+ NL80211_ATTR_FREQ_RANGE_MAX_BW,
+
+ NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
+ NL80211_ATTR_POWER_RULE_MAX_EIRP,
+
+ /* keep last */
+ __NL80211_REG_RULE_ATTR_AFTER_LAST,
+ NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_reg_rule_flags - regulatory rule flags
+ *
+ * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
+ * @NL80211_RRF_NO_CCK: CCK modulation not allowed
+ * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
+ * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
+ * @NL80211_RRF_DFS: DFS support is required to be used
+ * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
+ * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
+ * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
+ * @NL80211_RRF_NO_IBSS: no IBSS is allowed
+ */
+enum nl80211_reg_rule_flags {
+ NL80211_RRF_NO_OFDM = 1<<0,
+ NL80211_RRF_NO_CCK = 1<<1,
+ NL80211_RRF_NO_INDOOR = 1<<2,
+ NL80211_RRF_NO_OUTDOOR = 1<<3,
+ NL80211_RRF_DFS = 1<<4,
+ NL80211_RRF_PTP_ONLY = 1<<5,
+ NL80211_RRF_PTMP_ONLY = 1<<6,
+ NL80211_RRF_PASSIVE_SCAN = 1<<7,
+ NL80211_RRF_NO_IBSS = 1<<8,
+};
+
+/**
+ * enum nl80211_mntr_flags - monitor configuration flags
+ *
+ * Monitor configuration flags.
+ *
+ * @__NL80211_MNTR_FLAG_INVALID: reserved
+ *
+ * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
+ * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
+ * @NL80211_MNTR_FLAG_CONTROL: pass control frames
+ * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
+ * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
+ * overrides all other flags.
+ *
+ * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
+ * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
+ */
+enum nl80211_mntr_flags {
+ __NL80211_MNTR_FLAG_INVALID,
+ NL80211_MNTR_FLAG_FCSFAIL,
+ NL80211_MNTR_FLAG_PLCPFAIL,
+ NL80211_MNTR_FLAG_CONTROL,
+ NL80211_MNTR_FLAG_OTHER_BSS,
+ NL80211_MNTR_FLAG_COOK_FRAMES,
+
+ /* keep last */
+ __NL80211_MNTR_FLAG_AFTER_LAST,
+ NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_meshconf_params - mesh configuration parameters
+ *
+ * Mesh configuration parameters
+ *
+ * @__NL80211_MESHCONF_INVALID: internal use
+ *
+ * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
+ * millisecond units, used by the Peer Link Open message
+ *
+ * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
+ * millisecond units, used by the peer link management to close a peer link
+ *
+ * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
+ * millisecond units
+ *
+ * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
+ * on this mesh interface
+ *
+ * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
+ * open retries that can be sent to establish a new peer link instance in a
+ * mesh
+ *
+ * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
+ * point.
+ *
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
+ * open peer links when we detect compatible mesh peers.
+ *
+ * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
+ * containing a PREQ that an MP can send to a particular destination (path
+ * target)
+ *
+ * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
+ * (in milliseconds)
+ *
+ * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
+ * until giving up on a path discovery (in milliseconds)
+ *
+ * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
+ * points receiving a PREQ shall consider the forwarding information from the
+ * root to be valid. (TU = time unit)
+ *
+ * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
+ * TUs) during which an MP can send only one action frame containing a PREQ
+ * reference element
+ *
+ * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
+ * that it takes for an HWMP information element to propagate across the mesh
+ *
+ * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
+ *
+ * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_meshconf_params {
+ __NL80211_MESHCONF_INVALID,
+ NL80211_MESHCONF_RETRY_TIMEOUT,
+ NL80211_MESHCONF_CONFIRM_TIMEOUT,
+ NL80211_MESHCONF_HOLDING_TIMEOUT,
+ NL80211_MESHCONF_MAX_PEER_LINKS,
+ NL80211_MESHCONF_MAX_RETRIES,
+ NL80211_MESHCONF_TTL,
+ NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+ NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+ NL80211_MESHCONF_PATH_REFRESH_TIME,
+ NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+ NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+ NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+ NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+
+ /* keep last */
+ __NL80211_MESHCONF_ATTR_AFTER_LAST,
+ NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+ * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ * disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+ * 2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
+ * 2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
+ */
+enum nl80211_txq_attr {
+ __NL80211_TXQ_ATTR_INVALID,
+ NL80211_TXQ_ATTR_QUEUE,
+ NL80211_TXQ_ATTR_TXOP,
+ NL80211_TXQ_ATTR_CWMIN,
+ NL80211_TXQ_ATTR_CWMAX,
+ NL80211_TXQ_ATTR_AIFS,
+
+ /* keep last */
+ __NL80211_TXQ_ATTR_AFTER_LAST,
+ NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+};
+
+enum nl80211_txq_q {
+ NL80211_TXQ_Q_VO,
+ NL80211_TXQ_Q_VI,
+ NL80211_TXQ_Q_BE,
+ NL80211_TXQ_Q_BK
+};
+
+enum nl80211_sec_chan_offset {
+ NL80211_SEC_CHAN_NO_HT /* No HT */,
+ NL80211_SEC_CHAN_DISABLED /* HT20 only */,
+ NL80211_SEC_CHAN_BELOW /* HT40- */,
+ NL80211_SEC_CHAN_ABOVE /* HT40+ */
+};
+#endif /* __LINUX_NL80211_H */
projects / wpasupplicant / commitdiff