@item
Full system emulation. In this mode, QEMU emulates a full system (for
-example a PC), including a processor and various peripherals. It can
-be used to launch different Operating Systems without rebooting the
-PC or to debug system code.
+example a PC), including one or several processors and various
+peripherals. It can be used to launch different Operating Systems
+without rebooting the PC or to debug system code.
@item
User mode emulation (Linux host only). In this mode, QEMU can launch
For system emulation, the following hardware targets are supported:
@itemize
@item PC (x86 or x86_64 processor)
+@item ISA PC (old style PC without PCI bus)
@item PREP (PowerPC processor)
@item G3 BW PowerMac (PowerPC processor)
@item Mac99 PowerMac (PowerPC processor, in progress)
@item Sun4m (32-bit Sparc processor)
@item Sun4u (64-bit Sparc processor, in progress)
-@item Malta board (32-bit MIPS processor, in progress)
+@item Malta board (32-bit MIPS processor)
+@item ARM Integrator/CP (ARM926E or 1026E processor)
@end itemize
-For user emulation, x86, PowerPC, ARM, and Sparc32/64 CPUs are supported.
+For user emulation, x86, PowerPC, ARM, MIPS, and Sparc32/64 CPUs are supported.
@chapter Installation
@section Windows
Download the experimental binary installer at
-@url{http://www.freeoszoo.org/download.php}.
+@url{http://www.free.oszoo.org/download.html}.
@section Mac OS X
Download the experimental binary installer at
-@url{http://www.freeoszoo.org/download.php}.
+@url{http://www.free.oszoo.org/download.html}.
-@chapter QEMU PC System emulator invocation
+@chapter QEMU PC System emulator
@section Introduction
@c man begin DESCRIPTION
-The QEMU System emulator simulates the
-following PC peripherals:
+The QEMU PC System emulator simulates the
+following peripherals:
@itemize @minus
@item
PCI UHCI USB controller and a virtual USB hub.
@end itemize
+SMP is supported with up to 255 CPUs.
+
Note that adlib is only available when QEMU was configured with
-enable-adlib
@item -m megs
Set virtual RAM size to @var{megs} megabytes. Default is 128 MB.
+@item -smp n
+Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255
+CPUs are supported.
+
@item -nographic
Normally, QEMU uses SDL to display the VGA output. With this option,
The default is @code{en-us}.
-@item -enable-audio
-
-Will enable audio and all the sound hardware QEMU was built with.
-
@item -audio-help
Will show the audio subsystem help: list of drivers, tunable
parameters.
-@item -soundhw card1,card2,...
+@item -soundhw card1,card2,... or -soundhw all
Enable audio and selected sound hardware. Use ? to print all
available sound hardware.
@example
qemu -soundhw sb16,adlib hda
qemu -soundhw es1370 hda
+qemu -soundhw all hda
qemu -soundhw ?
@end example
@table @option
-@item -net nic[,vlan=n][,macaddr=addr]
+@item -net nic[,vlan=n][,macaddr=addr][,model=type]
Create a new Network Interface Card and connect it to VLAN @var{n} (@var{n}
= 0 is the default). The NIC is currently an NE2000 on the PC
target. Optionally, the MAC address can be changed. If no
@option{-net} option is specified, a single NIC is created.
+Qemu can emulate several different models of network card. Valid values for
+@var{type} are @code{ne2k_pci}, @code{ne2k_isa}, @code{rtl8139},
+@code{smc91c111} and @code{lance}. Not all devices are supported on all
+targets.
-@item -net user[,vlan=n]
+@item -net user[,vlan=n][,hostname=name]
Use the user mode network stack which requires no administrator
-priviledge to run. This is the default if no @option{-net} option is
-specified.
+priviledge to run. @option{hostname=name} can be used to specify the client
+hostname reported by the builtin DHCP server.
@item -net tap[,vlan=n][,fd=h][,ifname=name][,script=file]
Connect the host TAP network interface @var{name} to VLAN @var{n} and
@item -net none
Indicate that no network devices should be configured. It is used to
-override the default configuration which is activated if no
-@option{-net} options are provided.
+override the default configuration (@option{-net nic -net user}) which
+is activated if no @option{-net} options are provided.
@item -tftp prefix
When using the user mode network stack, activate a built-in TFTP
@include qemu-img.texi
+@subsection Virtual FAT disk images
+
+QEMU can automatically create a virtual FAT disk image from a
+directory tree. In order to use it, just type:
+
+@example
+qemu linux.img -hdb fat:/my_directory
+@end example
+
+Then you access access to all the files in the @file{/my_directory}
+directory without having to copy them in a disk image or to export
+them via SAMBA or NFS. The default access is @emph{read-only}.
+
+Floppies can be emulated with the @code{:floppy:} option:
+
+@example
+qemu linux.img -fda fat:floppy:/my_directory
+@end example
+
+A read/write support is available for testing (beta stage) with the
+@code{:rw:} option:
+
+@example
+qemu linux.img -fda fat:floppy:rw:/my_directory
+@end example
+
+What you should @emph{never} do:
+@itemize
+@item use non-ASCII filenames ;
+@item use "-snapshot" together with ":rw:" ;
+@item expect it to work when loadvm'ing ;
+@item write to the FAT directory on the host system while accessing it with the guest system.
+@end itemize
+
@section Network emulation
QEMU can simulate several networks cards (NE2000 boards on the PC
from @url{http://www.vmware.com/software/dosidle210.zip} to solve this
problem.
-@chapter QEMU PowerPC System emulator invocation
+@chapter QEMU System emulator for non PC targets
+
+QEMU is a generic emulator and it emulates many non PC
+machines. Most of the options are similar to the PC emulator. The
+differences are mentionned in the following sections.
+
+@section QEMU PowerPC System emulator
Use the executable @file{qemu-system-ppc} to simulate a complete PREP
or PowerMac PowerPC system.
@end itemize
QEMU uses the Open Hack'Ware Open Firmware Compatible BIOS available at
-@url{http://site.voila.fr/jmayer/OpenHackWare/index.htm}.
-
-You can read the qemu PC system emulation chapter to have more
-informations about QEMU usage.
+@url{http://perso.magic.fr/l_indien/OpenHackWare/index.htm}.
@c man begin OPTIONS
More information is available at
-@url{http://jocelyn.mayer.free.fr/qemu-ppc/}.
+@url{http://perso.magic.fr/l_indien/qemu-ppc/}.
-@chapter Sparc32 System emulator invocation
+@section Sparc32 System emulator invocation
Use the executable @file{qemu-system-sparc} to simulate a JavaStation
(sun4m architecture). The emulation is somewhat complete.
@c man end
-@chapter Sparc64 System emulator invocation
+@section Sparc64 System emulator invocation
Use the executable @file{qemu-system-sparc64} to simulate a Sun4u machine.
The emulator is not usable for anything yet.
PC-compatible serial ports
@end itemize
-@chapter MIPS System emulator invocation
+@section MIPS System emulator invocation
Use the executable @file{qemu-system-mips} to simulate a MIPS machine.
-The emulator begins to launch a Linux kernel.
+The emulator is able to boot a Linux kernel and to run a Linux Debian
+installation from NFS. The following devices are emulated:
+
+@itemize @minus
+@item
+MIPS R4K CPU
+@item
+PC style serial port
+@item
+NE2000 network card
+@end itemize
+
+More information is available in the QEMU mailing-list archive.
+
+@section ARM System emulator invocation
+
+Use the executable @file{qemu-system-arm} to simulate a ARM
+machine. The ARM Integrator/CP board is emulated with the following
+devices:
+
+@itemize @minus
+@item
+ARM926E or ARM1026E CPU
+@item
+Two PL011 UARTs
+@item
+SMC 91c111 Ethernet adapter
+@end itemize
+
+A Linux 2.6 test image is available on the QEMU web site. More
+information is available in the QEMU mailing-list archive.
-@chapter QEMU User space emulator invocation
+@chapter QEMU Linux User space emulator
@section Quick Start