#define EN0_CRDAHI 0x09 /* high byte, current remote dma address RD */
#define EN0_RSARHI 0x09 /* Remote start address reg 1 */
#define EN0_RCNTLO 0x0a /* Remote byte count reg WR */
+#define EN0_RTL8029ID0 0x0a /* Realtek ID byte #1 RD */
#define EN0_RCNTHI 0x0b /* Remote byte count reg WR */
+#define EN0_RTL8029ID1 0x0b /* Realtek ID byte #2 RD */
#define EN0_RSR 0x0c /* rx status reg RD */
#define EN0_RXCR 0x0c /* RX configuration reg WR */
#define EN0_TXCR 0x0d /* TX configuration reg WR */
#define EN2_STARTPG 0x21 /* Starting page of ring bfr RD */
#define EN2_STOPPG 0x22 /* Ending page +1 of ring bfr RD */
+#define EN3_CONFIG0 0x33
+#define EN3_CONFIG1 0x34
+#define EN3_CONFIG2 0x35
+#define EN3_CONFIG3 0x36
+
/* Register accessed at EN_CMD, the 8390 base addr. */
#define E8390_STOP 0x01 /* Stop and reset the chip */
#define E8390_START 0x02 /* Start the chip, clear reset */
return (crc >> 26);
}
-/* return the max buffer size if the NE2000 can receive more data */
-static int ne2000_can_receive(void *opaque)
+static int ne2000_buffer_full(NE2000State *s)
{
- NE2000State *s = opaque;
int avail, index, boundary;
-
- if (s->cmd & E8390_STOP)
- return 0;
+
index = s->curpag << 8;
boundary = s->boundary << 8;
- if (index < boundary)
+ if (index <= boundary)
avail = boundary - index;
else
avail = (s->stop - s->start) - (index - boundary);
if (avail < (MAX_ETH_FRAME_SIZE + 4))
- return 0;
- return MAX_ETH_FRAME_SIZE;
+ return 1;
+ return 0;
+}
+
+static int ne2000_can_receive(void *opaque)
+{
+ NE2000State *s = opaque;
+
+ if (s->cmd & E8390_STOP)
+ return 1;
+ return !ne2000_buffer_full(s);
}
#define MIN_BUF_SIZE 60
printf("NE2000: received len=%d\n", size);
#endif
- if (!ne2000_can_receive(s))
+ if (s->cmd & E8390_STOP || ne2000_buffer_full(s))
return;
/* XXX: check this */
case EN2_STOPPG:
ret = s->stop >> 8;
break;
+ case EN0_RTL8029ID0:
+ ret = 0x50;
+ break;
+ case EN0_RTL8029ID1:
+ ret = 0x43;
+ break;
+ case EN3_CONFIG0:
+ ret = 0; /* 10baseT media */
+ break;
+ case EN3_CONFIG2:
+ ret = 0x40; /* 10baseT active */
+ break;
+ case EN3_CONFIG3:
+ ret = 0x40; /* Full duplex */
+ break;
default:
ret = 0x00;
break;
{
NE2000State* s=(NE2000State*)opaque;
+ qemu_put_8s(f, &s->rxcr);
+
qemu_put_8s(f, &s->cmd);
qemu_put_be32s(f, &s->start);
qemu_put_be32s(f, &s->stop);
{
NE2000State* s=(NE2000State*)opaque;
- if (version_id != 1)
+ if (version_id == 2) {
+ qemu_get_8s(f, &s->rxcr);
+ } else if (version_id == 1) {
+ s->rxcr = 0x0c;
+ } else {
return -EINVAL;
+ }
qemu_get_8s(f, &s->cmd);
qemu_get_be32s(f, &s->start);
ne2000_reset(s);
- s->vc = qemu_new_vlan_client(nd->vlan, ne2000_receive, s);
+ s->vc = qemu_new_vlan_client(nd->vlan, ne2000_receive,
+ ne2000_can_receive, s);
snprintf(s->vc->info_str, sizeof(s->vc->info_str),
"ne2000 macaddr=%02x:%02x:%02x:%02x:%02x:%02x",
s->macaddr[4],
s->macaddr[5]);
- register_savevm("ne2000", 0, 1, ne2000_save, ne2000_load, s);
+ register_savevm("ne2000", 0, 2, ne2000_save, ne2000_load, s);
}
/***********************************************************/
s->pci_dev = (PCIDevice *)d;
memcpy(s->macaddr, nd->macaddr, 6);
ne2000_reset(s);
- s->vc = qemu_new_vlan_client(nd->vlan, ne2000_receive, s);
+ s->vc = qemu_new_vlan_client(nd->vlan, ne2000_receive,
+ ne2000_can_receive, s);
snprintf(s->vc->info_str, sizeof(s->vc->info_str),
"ne2000 pci macaddr=%02x:%02x:%02x:%02x:%02x:%02x",
s->macaddr[5]);
/* XXX: instance number ? */
- register_savevm("ne2000", 0, 1, ne2000_save, ne2000_load, s);
+ register_savevm("ne2000", 0, 2, ne2000_save, ne2000_load, s);
register_savevm("ne2000_pci", 0, 1, generic_pci_save, generic_pci_load,
&d->dev);
}