int cylinders, heads, sectors;
int64_t nb_sectors;
int mult_sectors;
+ int identify_set;
+ uint16_t identify_data[256];
SetIRQFunc *set_irq;
void *irq_opaque;
int irq;
/* ide regs */
uint8_t feature;
uint8_t error;
- uint16_t nsector; /* 0 is 256 to ease computations */
+ uint32_t nsector;
uint8_t sector;
uint8_t lcyl;
uint8_t hcyl;
+ /* other part of tf for lba48 support */
+ uint8_t hob_feature;
+ uint8_t hob_nsector;
+ uint8_t hob_sector;
+ uint8_t hob_lcyl;
+ uint8_t hob_hcyl;
+
uint8_t select;
uint8_t status;
+
/* 0x3f6 command, only meaningful for drive 0 */
uint8_t cmd;
+ /* set for lba48 access */
+ uint8_t lba48;
/* depends on bit 4 in select, only meaningful for drive 0 */
struct IDEState *cur_drive;
BlockDriverState *bs;
uint8_t *data_end;
uint8_t io_buffer[MAX_MULT_SECTORS*512 + 4];
QEMUTimer *sector_write_timer; /* only used for win2k instal hack */
+ uint32_t irq_count; /* counts IRQs when using win2k install hack */
} IDEState;
#define BM_STATUS_DMAING 0x01
unsigned int oldsize;
char buf[20];
+ if (s->identify_set) {
+ memcpy(s->io_buffer, s->identify_data, sizeof(s->identify_data));
+ return;
+ }
+
memset(s->io_buffer, 0, 512);
p = (uint16_t *)s->io_buffer;
put_le16(p + 0, 0x0040);
put_le16(p + 47, 0x8000 | MAX_MULT_SECTORS);
#endif
put_le16(p + 48, 1); /* dword I/O */
- put_le16(p + 49, 1 << 9 | 1 << 8); /* DMA and LBA supported */
+ put_le16(p + 49, (1 << 11) | (1 << 9) | (1 << 8)); /* DMA and LBA supported */
put_le16(p + 51, 0x200); /* PIO transfer cycle */
put_le16(p + 52, 0x200); /* DMA transfer cycle */
- put_le16(p + 53, 1 | 1 << 2); /* words 54-58,88 are valid */
+ put_le16(p + 53, 1 | (1 << 1) | (1 << 2)); /* words 54-58,64-70,88 are valid */
put_le16(p + 54, s->cylinders);
put_le16(p + 55, s->heads);
put_le16(p + 56, s->sectors);
put_le16(p + 59, 0x100 | s->mult_sectors);
put_le16(p + 60, s->nb_sectors);
put_le16(p + 61, s->nb_sectors >> 16);
- put_le16(p + 80, (1 << 1) | (1 << 2));
+ put_le16(p + 63, 0x07); /* mdma0-2 supported */
+ put_le16(p + 65, 120);
+ put_le16(p + 66, 120);
+ put_le16(p + 67, 120);
+ put_le16(p + 68, 120);
+ put_le16(p + 80, 0xf0); /* ata3 -> ata6 supported */
+ put_le16(p + 81, 0x16); /* conforms to ata5 */
put_le16(p + 82, (1 << 14));
- put_le16(p + 83, (1 << 14));
+ /* 13=flush_cache_ext,12=flush_cache,10=lba48 */
+ put_le16(p + 83, (1 << 14) | (1 << 13) | (1 <<12) | (1 << 10));
put_le16(p + 84, (1 << 14));
put_le16(p + 85, (1 << 14));
- put_le16(p + 86, 0);
+ /* 13=flush_cache_ext,12=flush_cache,10=lba48 */
+ put_le16(p + 86, (1 << 14) | (1 << 13) | (1 <<12) | (1 << 10));
put_le16(p + 87, (1 << 14));
- put_le16(p + 88, 0x1f | (1 << 13));
- put_le16(p + 93, 1 | (1 << 14) | 0x2000 | 0x4000);
+ put_le16(p + 88, 0x3f | (1 << 13)); /* udma5 set and supported */
+ put_le16(p + 93, 1 | (1 << 14) | 0x2000);
+ put_le16(p + 100, s->nb_sectors);
+ put_le16(p + 101, s->nb_sectors >> 16);
+ put_le16(p + 102, s->nb_sectors >> 32);
+ put_le16(p + 103, s->nb_sectors >> 48);
+
+ memcpy(s->identify_data, p, sizeof(s->identify_data));
+ s->identify_set = 1;
}
static void ide_atapi_identify(IDEState *s)
uint16_t *p;
char buf[20];
+ if (s->identify_set) {
+ memcpy(s->io_buffer, s->identify_data, sizeof(s->identify_data));
+ return;
+ }
+
memset(s->io_buffer, 0, 512);
p = (uint16_t *)s->io_buffer;
/* Removable CDROM, 50us response, 12 byte packets */
put_le16(p + 66, 0xb4); /* recommended DMA multiword tx cycle time */
put_le16(p + 67, 0x12c); /* minimum PIO cycle time without flow control */
put_le16(p + 68, 0xb4); /* minimum PIO cycle time with IORDY flow control */
-
+
put_le16(p + 71, 30); /* in ns */
put_le16(p + 72, 30); /* in ns */
put_le16(p + 80, 0x1e); /* support up to ATA/ATAPI-4 */
+
+ memcpy(s->identify_data, p, sizeof(s->identify_data));
+ s->identify_set = 1;
}
static void ide_set_signature(IDEState *s)
int64_t sector_num;
if (s->select & 0x40) {
/* lba */
- sector_num = ((s->select & 0x0f) << 24) | (s->hcyl << 16) |
- (s->lcyl << 8) | s->sector;
+ if (!s->lba48) {
+ sector_num = ((s->select & 0x0f) << 24) | (s->hcyl << 16) |
+ (s->lcyl << 8) | s->sector;
+ } else {
+ sector_num = ((int64_t)s->hob_hcyl << 40) |
+ ((int64_t) s->hob_lcyl << 32) |
+ ((int64_t) s->hob_sector << 24) |
+ ((int64_t) s->hcyl << 16) |
+ ((int64_t) s->lcyl << 8) | s->sector;
+ }
} else {
sector_num = ((s->hcyl << 8) | s->lcyl) * s->heads * s->sectors +
- (s->select & 0x0f) * s->sectors +
- (s->sector - 1);
+ (s->select & 0x0f) * s->sectors + (s->sector - 1);
}
return sector_num;
}
{
unsigned int cyl, r;
if (s->select & 0x40) {
- s->select = (s->select & 0xf0) | (sector_num >> 24);
- s->hcyl = (sector_num >> 16);
- s->lcyl = (sector_num >> 8);
- s->sector = (sector_num);
+ if (!s->lba48) {
+ s->select = (s->select & 0xf0) | (sector_num >> 24);
+ s->hcyl = (sector_num >> 16);
+ s->lcyl = (sector_num >> 8);
+ s->sector = (sector_num);
+ } else {
+ s->sector = sector_num;
+ s->lcyl = sector_num >> 8;
+ s->hcyl = sector_num >> 16;
+ s->hob_sector = sector_num >> 24;
+ s->hob_lcyl = sector_num >> 32;
+ s->hob_hcyl = sector_num >> 40;
+ }
} else {
cyl = sector_num / (s->heads * s->sectors);
r = sector_num % (s->heads * s->sectors);
ide_set_sector(s, sector_num + n);
#ifdef TARGET_I386
- if (win2k_install_hack) {
+ if (win2k_install_hack && ((++s->irq_count % 16) == 0)) {
/* It seems there is a bug in the Windows 2000 installer HDD
IDE driver which fills the disk with empty logs when the
IDE write IRQ comes too early. This hack tries to correct
if (n == 0) {
/* end of transfer */
s->status = READY_STAT | SEEK_STAT;
- ide_set_irq(s);
+#ifdef TARGET_I386
+ if (win2k_install_hack && ((++s->irq_count % 16) == 0)) {
+ /* It seems there is a bug in the Windows 2000 installer
+ HDD IDE driver which fills the disk with empty logs
+ when the IDE write IRQ comes too early. This hack tries
+ to correct that at the expense of slower write
+ performances. Use this option _only_ to install Windows
+ 2000. You must disable it for normal use. */
+ qemu_mod_timer(s->sector_write_timer,
+ qemu_get_clock(vm_clock) + (ticks_per_sec / 1000));
+ } else
+#endif
+ ide_set_irq(s);
return 0;
}
if (n > MAX_MULT_SECTORS)
s->nb_sectors = nb_sectors;
}
+static void ide_cmd_lba48_transform(IDEState *s, int lba48)
+{
+ s->lba48 = lba48;
+
+ /* handle the 'magic' 0 nsector count conversion here. to avoid
+ * fiddling with the rest of the read logic, we just store the
+ * full sector count in ->nsector and ignore ->hob_nsector from now
+ */
+ if (!s->lba48) {
+ if (!s->nsector)
+ s->nsector = 256;
+ } else {
+ if (!s->nsector && !s->hob_nsector)
+ s->nsector = 65536;
+ else {
+ int lo = s->nsector;
+ int hi = s->hob_nsector;
+
+ s->nsector = (hi << 8) | lo;
+ }
+ }
+}
+
+static void ide_clear_hob(IDEState *ide_if)
+{
+ /* any write clears HOB high bit of device control register */
+ ide_if[0].select &= ~(1 << 7);
+ ide_if[1].select &= ~(1 << 7);
+}
+
static void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val)
{
IDEState *ide_if = opaque;
IDEState *s;
int unit, n;
+ int lba48 = 0;
#ifdef DEBUG_IDE
printf("IDE: write addr=0x%x val=0x%02x\n", addr, val);
#endif
+
addr &= 7;
switch(addr) {
case 0:
break;
case 1:
+ ide_clear_hob(ide_if);
/* NOTE: data is written to the two drives */
+ ide_if[0].hob_feature = ide_if[0].feature;
+ ide_if[1].hob_feature = ide_if[1].feature;
ide_if[0].feature = val;
ide_if[1].feature = val;
break;
case 2:
- if (val == 0)
- val = 256;
+ ide_clear_hob(ide_if);
+ ide_if[0].hob_nsector = ide_if[0].nsector;
+ ide_if[1].hob_nsector = ide_if[1].nsector;
ide_if[0].nsector = val;
ide_if[1].nsector = val;
break;
case 3:
+ ide_clear_hob(ide_if);
+ ide_if[0].hob_sector = ide_if[0].sector;
+ ide_if[1].hob_sector = ide_if[1].sector;
ide_if[0].sector = val;
ide_if[1].sector = val;
break;
case 4:
+ ide_clear_hob(ide_if);
+ ide_if[0].hob_lcyl = ide_if[0].lcyl;
+ ide_if[1].hob_lcyl = ide_if[1].lcyl;
ide_if[0].lcyl = val;
ide_if[1].lcyl = val;
break;
case 5:
+ ide_clear_hob(ide_if);
+ ide_if[0].hob_hcyl = ide_if[0].hcyl;
+ ide_if[1].hob_hcyl = ide_if[1].hcyl;
ide_if[0].hcyl = val;
ide_if[1].hcyl = val;
break;
case 6:
+ /* FIXME: HOB readback uses bit 7 */
ide_if[0].select = (val & ~0x10) | 0xa0;
ide_if[1].select = (val | 0x10) | 0xa0;
/* select drive */
/* ignore commands to non existant slave */
if (s != ide_if && !s->bs)
break;
+
switch(val) {
case WIN_IDENTIFY:
if (s->bs && !s->is_cdrom) {
}
ide_set_irq(s);
break;
+ case WIN_VERIFY_EXT:
+ lba48 = 1;
case WIN_VERIFY:
case WIN_VERIFY_ONCE:
/* do sector number check ? */
+ ide_cmd_lba48_transform(s, lba48);
s->status = READY_STAT;
ide_set_irq(s);
break;
+ case WIN_READ_EXT:
+ lba48 = 1;
case WIN_READ:
case WIN_READ_ONCE:
if (!s->bs)
goto abort_cmd;
+ ide_cmd_lba48_transform(s, lba48);
s->req_nb_sectors = 1;
ide_sector_read(s);
break;
+ case WIN_WRITE_EXT:
+ lba48 = 1;
case WIN_WRITE:
case WIN_WRITE_ONCE:
+ ide_cmd_lba48_transform(s, lba48);
s->error = 0;
s->status = SEEK_STAT | READY_STAT;
s->req_nb_sectors = 1;
ide_transfer_start(s, s->io_buffer, 512, ide_sector_write);
break;
+ case WIN_MULTREAD_EXT:
+ lba48 = 1;
case WIN_MULTREAD:
if (!s->mult_sectors)
goto abort_cmd;
+ ide_cmd_lba48_transform(s, lba48);
s->req_nb_sectors = s->mult_sectors;
ide_sector_read(s);
break;
+ case WIN_MULTWRITE_EXT:
+ lba48 = 1;
case WIN_MULTWRITE:
if (!s->mult_sectors)
goto abort_cmd;
+ ide_cmd_lba48_transform(s, lba48);
s->error = 0;
s->status = SEEK_STAT | READY_STAT;
s->req_nb_sectors = s->mult_sectors;
n = s->req_nb_sectors;
ide_transfer_start(s, s->io_buffer, 512 * n, ide_sector_write);
break;
+ case WIN_READDMA_EXT:
+ lba48 = 1;
case WIN_READDMA:
case WIN_READDMA_ONCE:
if (!s->bs)
goto abort_cmd;
+ ide_cmd_lba48_transform(s, lba48);
ide_sector_read_dma(s);
break;
+ case WIN_WRITEDMA_EXT:
+ lba48 = 1;
case WIN_WRITEDMA:
case WIN_WRITEDMA_ONCE:
if (!s->bs)
goto abort_cmd;
+ ide_cmd_lba48_transform(s, lba48);
ide_sector_write_dma(s);
break;
+ case WIN_READ_NATIVE_MAX_EXT:
+ lba48 = 1;
case WIN_READ_NATIVE_MAX:
+ ide_cmd_lba48_transform(s, lba48);
ide_set_sector(s, s->nb_sectors - 1);
s->status = READY_STAT;
ide_set_irq(s);
/* XXX: valid for CDROM ? */
switch(s->feature) {
case 0x02: /* write cache enable */
- case 0x03: /* set transfer mode */
case 0x82: /* write cache disable */
case 0xaa: /* read look-ahead enable */
case 0x55: /* read look-ahead disable */
s->status = READY_STAT | SEEK_STAT;
ide_set_irq(s);
break;
+ case 0x03: { /* set transfer mode */
+ uint8_t val = s->nsector & 0x07;
+
+ switch (s->nsector >> 3) {
+ case 0x00: /* pio default */
+ case 0x01: /* pio mode */
+ put_le16(s->identify_data + 63,0x07);
+ put_le16(s->identify_data + 88,0x3f);
+ break;
+ case 0x04: /* mdma mode */
+ put_le16(s->identify_data + 63,0x07 | (1 << (val + 8)));
+ put_le16(s->identify_data + 88,0x3f);
+ break;
+ case 0x08: /* udma mode */
+ put_le16(s->identify_data + 63,0x07);
+ put_le16(s->identify_data + 88,0x3f | (1 << (val + 8)));
+ break;
+ default:
+ goto abort_cmd;
+ }
+ s->status = READY_STAT | SEEK_STAT;
+ ide_set_irq(s);
+ break;
+ }
default:
goto abort_cmd;
}
break;
+ case WIN_FLUSH_CACHE:
+ case WIN_FLUSH_CACHE_EXT:
case WIN_STANDBYNOW1:
case WIN_IDLEIMMEDIATE:
- case WIN_FLUSH_CACHE:
s->status = READY_STAT;
ide_set_irq(s);
break;
case WIN_PIDENTIFY:
if (s->is_cdrom) {
ide_atapi_identify(s);
- s->status = READY_STAT;
+ s->status = READY_STAT | SEEK_STAT;
ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop);
} else {
ide_abort_command(s);
IDEState *ide_if = opaque;
IDEState *s = ide_if->cur_drive;
uint32_t addr;
- int ret;
+ int ret, hob;
addr = addr1 & 7;
+ /* FIXME: HOB readback uses bit 7, but it's always set right now */
+ //hob = s->select & (1 << 7);
+ hob = 0;
switch(addr) {
case 0:
ret = 0xff;
case 1:
if (!ide_if[0].bs && !ide_if[1].bs)
ret = 0;
- else
+ else if (!hob)
ret = s->error;
+ else
+ ret = s->hob_feature;
break;
case 2:
if (!ide_if[0].bs && !ide_if[1].bs)
ret = 0;
- else
+ else if (!hob)
ret = s->nsector & 0xff;
+ else
+ ret = s->hob_nsector;
break;
case 3:
if (!ide_if[0].bs && !ide_if[1].bs)
ret = 0;
- else
+ else if (!hob)
ret = s->sector;
+ else
+ ret = s->hob_sector;
break;
case 4:
if (!ide_if[0].bs && !ide_if[1].bs)
ret = 0;
- else
+ else if (!hob)
ret = s->lcyl;
+ else
+ ret = s->hob_lcyl;
break;
case 5:
if (!ide_if[0].bs && !ide_if[1].bs)
ret = 0;
- else
+ else if (!hob)
ret = s->hcyl;
+ else
+ ret = s->hob_hcyl;
break;
case 6:
if (!ide_if[0].bs && !ide_if[1].bs)
projects / qemu / blobdiff