host_cc="gcc"
ar="ar"
make="make"
+install="install"
strip="strip"
cpu=`uname -m`
target_list=""
s390)
cpu="s390"
;;
- sparc)
+ sparc|sun4[muv])
cpu="sparc"
;;
sparc64)
fmod="no"
fmod_lib=""
fmod_inc=""
+bsd="no"
linux="no"
kqemu="no"
profiler="no"
cocoa="no"
check_gfx="yes"
check_gcc="yes"
+softmmu="yes"
+user="no"
+build_docs="no"
# OS specific
targetos=`uname -s`
bsd="yes"
darwin="yes"
;;
+SunOS)
+solaris="yes"
+;;
*)
oss="yes"
linux="yes"
+user="yes"
if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
kqemu="yes"
fi
esac
if [ "$bsd" = "yes" ] ; then
- if [ ! "$darwin" = "yes" ] ; then
+ if [ "$darwin" != "yes" ] ; then
make="gmake"
fi
fi
+if [ "$solaris" = "yes" ] ; then
+ make="gmake"
+ install="ginstall"
+ solarisrev=`uname -r | cut -f2 -d.`
+fi
+
# find source path
-# XXX: we assume an absolute path is given when launching configure,
-# except in './configure' case.
-source_path=${0%configure}
-source_path=${source_path%/}
-source_path_used="yes"
-if test -z "$source_path" -o "$source_path" = "." ; then
+source_path=`dirname "$0"`
+if [ -z "$source_path" ]; then
source_path=`pwd`
+else
+ source_path=`cd "$source_path"; pwd`
+fi
+if test "$source_path" = `pwd` ; then
source_path_used="no"
+else
+ source_path_used="yes"
fi
for opt do
+ optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'`
case "$opt" in
--help|-h) show_help=yes
;;
- --prefix=*) prefix=`echo $opt | cut -d '=' -f 2`
+ --prefix=*) prefix="$optarg"
+ ;;
+ --interp-prefix=*) interp_prefix="$optarg"
;;
- --interp-prefix=*) interp_prefix=`echo $opt | cut -d '=' -f 2`
+ --source-path=*) source_path="$optarg"
+ source_path_used="yes"
;;
- --source-path=*) source_path=`echo $opt | cut -d '=' -f 2`
+ --cross-prefix=*) cross_prefix="$optarg"
;;
- --cross-prefix=*) cross_prefix=`echo $opt | cut -d '=' -f 2`
+ --cc=*) cc="$optarg"
;;
- --cc=*) cc=`echo $opt | cut -d '=' -f 2`
+ --host-cc=*) host_cc="$optarg"
;;
- --host-cc=*) host_cc=`echo $opt | cut -d '=' -f 2`
+ --make=*) make="$optarg"
;;
- --make=*) make=`echo $opt | cut -d '=' -f 2`
+ --install=*) install="$optarg"
;;
- --extra-cflags=*) CFLAGS="${opt#--extra-cflags=}"
+ --extra-cflags=*) CFLAGS="$optarg"
;;
- --extra-ldflags=*) LDFLAGS="${opt#--extra-ldflags=}"
+ --extra-ldflags=*) LDFLAGS="$optarg"
;;
- --cpu=*) cpu=`echo $opt | cut -d '=' -f 2`
+ --cpu=*) cpu="$optarg"
;;
- --target-list=*) target_list=${opt#--target-list=}
+ --target-list=*) target_list="$optarg"
;;
--enable-gprof) gprof="yes"
;;
;;
--enable-fmod) fmod="yes"
;;
- --fmod-lib=*) fmod_lib=${opt#--fmod-lib=}
+ --fmod-lib=*) fmod_lib="$optarg"
;;
- --fmod-inc=*) fmod_inc=${opt#--fmod-inc=}
+ --fmod-inc=*) fmod_inc="$optarg"
;;
--enable-mingw32) mingw32="yes" ; cross_prefix="i386-mingw32-"
;;
;;
--enable-profiler) profiler="yes"
;;
- --kernel-path=*) kernel_path=${opt#--kernel-path=}
+ --kernel-path=*) kernel_path="$optarg"
;;
--enable-cocoa) cocoa="yes" ; coreaudio="yes" ; sdl="no"
;;
;;
--disable-gcc-check) check_gcc="no"
;;
+ --disable-system) softmmu="no"
+ ;;
+ --enable-system) softmmu="yes"
+ ;;
+ --disable-user) user="no"
+ ;;
+ --enable-user) user="yes"
+ ;;
esac
done
CFLAGS="-O2"
fi
+if test x"$show_help" = x"yes" ; then
+cat << EOF
+
+Usage: configure [options]
+Options: [defaults in brackets after descriptions]
+
+EOF
+echo "Standard options:"
+echo " --help print this message"
+echo " --prefix=PREFIX install in PREFIX [$prefix]"
+echo " --interp-prefix=PREFIX where to find shared libraries, etc."
+echo " use %M for cpu name [$interp_prefix]"
+echo " --target-list=LIST set target list [$target_list]"
+echo ""
+echo "kqemu kernel acceleration support:"
+echo " --disable-kqemu disable kqemu support"
+echo " --kernel-path=PATH set the kernel path (configure probes it)"
+echo ""
+echo "Advanced options (experts only):"
+echo " --source-path=PATH path of source code [$source_path]"
+echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]"
+echo " --cc=CC use C compiler CC [$cc]"
+echo " --host-cc=CC use C compiler CC [$host_cc] for dyngen etc."
+echo " --make=MAKE use specified make [$make]"
+echo " --install=INSTALL use specified install [$install]"
+echo " --static enable static build [$static]"
+echo " --enable-cocoa enable COCOA (Mac OS X only)"
+echo " --enable-mingw32 enable Win32 cross compilation with mingw32"
+echo " --enable-adlib enable Adlib emulation"
+echo " --enable-coreaudio enable Coreaudio audio driver"
+echo " --enable-alsa enable ALSA audio driver"
+echo " --enable-fmod enable FMOD audio driver"
+echo " --enabled-dsound enable DirectSound audio driver"
+echo " --enable-system enable all system emulation targets"
+echo " --disable-system disable all system emulation targets"
+echo " --enable-user enable all linux usermode emulation targets"
+echo " --disable-user disable all linux usermode emulation targets"
+echo " --fmod-lib path to FMOD library"
+echo " --fmod-inc path to FMOD includes"
+echo ""
+echo "NOTE: The object files are build at the place where configure is launched"
+exit 1
+fi
+
cc="${cross_prefix}${cc}"
ar="${cross_prefix}${ar}"
strip="${cross_prefix}${strip}"
+# check that the C compiler works.
+cat > $TMPC <<EOF
+int main(void) {}
+EOF
+
+if $cc -c -o $TMPO $TMPC 2>/dev/null ; then
+ : C compiler works ok
+else
+ echo "ERROR: \"$cc\" either does not exist or does not work"
+ exit 1
+fi
+
if test "$mingw32" = "yes" ; then
linux="no"
EXESUF=".exe"
fi
fi
+#
+# Solaris specific configure tool chain decisions
+#
+if test "$solaris" = "yes" ; then
+ #
+ # gcc for solaris 10/fcs in /usr/sfw/bin doesn't compile qemu correctly
+ # override the check with --disable-gcc-check
+ #
+ if test "$solarisrev" -eq 10 -a "$check_gcc" = "yes" ; then
+ solgcc=`which $cc`
+ if test "$solgcc" = "/usr/sfw/bin/gcc" ; then
+ echo "Solaris 10/FCS gcc in /usr/sfw/bin will not compiled qemu correctly."
+ echo "please get gcc-3.4.3 or later, from www.blastwave.org using pkg-get -i gcc3"
+ echo "or get the latest patch from SunSolve for gcc"
+ exit 1
+ fi
+ fi
+ solinst=`which $install 2> /dev/null | /usr/bin/grep -v "no $install in"`
+ if test -z "$solinst" ; then
+ echo "Solaris install program not found. Use --install=/usr/ucb/install or"
+ echo "install fileutils from www.blastwave.org using pkg-get -i fileutils"
+ echo "to get ginstall which is used by default (which lives in /opt/csw/bin)"
+ exit 1
+ fi
+ if test "$solinst" = "/usr/sbin/install" ; then
+ echo "Error: Solaris /usr/sbin/install is not an appropriate install program."
+ echo "try ginstall from the GNU fileutils available from www.blastwave.org"
+ echo "using pkg-get -i fileutils, or use --install=/usr/ucb/install"
+ exit 1
+ fi
+ sol_ar=`which ar 2> /dev/null | /usr/bin/grep -v "no ar in"`
+ if test -z "$sol_ar" ; then
+ echo "Error: No path includes ar"
+ if test -f /usr/ccs/bin/ar ; then
+ echo "Add /usr/ccs/bin to your path and rerun configure"
+ fi
+ exit 1
+ fi
+fi
+
+
if test -z "$target_list" ; then
# these targets are portable
- target_list="i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu mips-softmmu arm-softmmu"
+ if [ "$softmmu" = "yes" ] ; then
+ target_list="i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu mips-softmmu mipsel-softmmu arm-softmmu"
+ fi
# the following are Linux specific
- if [ "$linux" = "yes" ] ; then
+ if [ "$user" = "yes" ] ; then
target_list="i386-user arm-user armeb-user sparc-user ppc-user mips-user mipsel-user $target_list"
fi
else
- target_list=$(echo "$target_list" | sed -e 's/,/ /g')
+ target_list=`echo "$target_list" | sed -e 's/,/ /g'`
+fi
+if test -z "$target_list" ; then
+ echo "No targets enabled"
+ exit 1
fi
if test -z "$cross_prefix" ; then
have_gcc3_options="yes"
fi
-# Check for gcc4
+# Check for gcc4, error if pre-gcc4
if test "$check_gcc" = "yes" ; then
cat > $TMPC <<EOF
-#if __GNUC__ >= 4
-#error gcc4
+#if __GNUC__ < 4
+#error gcc3
#endif
int main(){return 0;}
EOF
- if ! $cc -o $TMPO $TMPC 2>/dev/null ; then
+ if $cc -o $TMPO $TMPC 2>/dev/null ; then
echo "ERROR: \"$cc\" looks like gcc 4.x"
echo "QEMU is known to have problems when compiled with gcc 4.x"
echo "It is recommended that you use gcc 3.x to build QEMU"
fi # cross compilation
fi # -z $sdl
-if test x"$show_help" = x"yes" ; then
-cat << EOF
-
-Usage: configure [options]
-Options: [defaults in brackets after descriptions]
-
-EOF
-echo "Standard options:"
-echo " --help print this message"
-echo " --prefix=PREFIX install in PREFIX [$prefix]"
-echo " --interp-prefix=PREFIX where to find shared libraries, etc."
-echo " use %M for cpu name [$interp_prefix]"
-echo " --target-list=LIST set target list [$target_list]"
-echo ""
-echo "kqemu kernel acceleration support:"
-echo " --disable-kqemu disable kqemu support"
-echo " --kernel-path=PATH set the kernel path (configure probes it)"
-echo ""
-echo "Advanced options (experts only):"
-echo " --source-path=PATH path of source code [$source_path]"
-echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]"
-echo " --cc=CC use C compiler CC [$cc]"
-echo " --host-cc=CC use C compiler CC [$host_cc] for dyngen etc."
-echo " --make=MAKE use specified make [$make]"
-echo " --static enable static build [$static]"
-echo " --enable-cocoa enable COCOA (Mac OS X only)"
-echo " --enable-mingw32 enable Win32 cross compilation with mingw32"
-echo " --enable-adlib enable Adlib emulation"
-echo " --enable-coreaudio enable Coreaudio audio driver"
-echo " --enable-alsa enable ALSA audio driver"
-echo " --enable-fmod enable FMOD audio driver"
-echo " --enabled-dsound enable DirectSound audio driver"
-echo " --fmod-lib path to FMOD library"
-echo " --fmod-inc path to FMOD includes"
-echo ""
-echo "NOTE: The object files are build at the place where configure is launched"
-exit 1
+# Check if tools are available to build documentation.
+if [ -x "`which texi2html`" ] && [ -x "`which pod2man`" ]; then
+ build_docs="yes"
fi
if test "$mingw32" = "yes" ; then
echo "C compiler $cc"
echo "Host C compiler $host_cc"
echo "make $make"
+echo "install $install"
echo "host CPU $cpu"
echo "host big endian $bigendian"
echo "target list $target_list"
echo "CoreAudio support $coreaudio"
echo "ALSA support $alsa"
echo "DSound support $dsound"
-echo -n "FMOD support $fmod"
if test "$fmod" = "yes"; then
if test -z $fmod_lib || test -z $fmod_inc; then
echo
echo
exit 1
fi
- echo -n " (lib='$fmod_lib' include='$fmod_inc')"
+ fmod_support=" (lib='$fmod_lib' include='$fmod_inc')"
+else
+ fmod_support=""
fi
-echo ""
+echo "FMOD support $fmod $fmod_support"
echo "kqemu support $kqemu"
+echo "Documentation $build_docs"
if test $sdl_too_old = "yes"; then
echo "-> Your SDL version is too old - please upgrade to have SDL support"
#if test "$sdl_static" = "no"; then
# echo "WARNING: cannot compile statically with SDL - qemu-fast won't have a graphical output"
#fi
-
config_mak="config-host.mak"
config_h="config-host.h"
#echo "Creating $config_mak and $config_h"
echo "# Automatically generated by configure - do not modify" > $config_mak
+echo "# Configured with: $0 $@" >> $config_mak
echo "/* Automatically generated by configure - do not modify */" > $config_h
echo "prefix=$prefix" >> $config_mak
echo "docdir=$docdir" >> $config_mak
echo "#define CONFIG_QEMU_SHAREDIR \"$datadir\"" >> $config_h
echo "MAKE=$make" >> $config_mak
+echo "INSTALL=$install" >> $config_mak
echo "CC=$cc" >> $config_mak
if test "$have_gcc3_options" = "yes" ; then
echo "HAVE_GCC3_OPTIONS=yes" >> $config_mak
echo "CONFIG_DARWIN=yes" >> $config_mak
echo "#define CONFIG_DARWIN 1" >> $config_h
fi
+if test "$solaris" = "yes" ; then
+ echo "CONFIG_SOLARIS=yes" >> $config_mak
+ echo "#define HOST_SOLARIS $solarisrev" >> $config_h
+fi
if test "$gdbstub" = "yes" ; then
echo "CONFIG_GDBSTUB=yes" >> $config_mak
echo "#define CONFIG_GDBSTUB 1" >> $config_h
echo "CONFIG_FMOD_INC=$fmod_inc" >> $config_mak
echo "#define CONFIG_FMOD 1" >> $config_h
fi
-echo -n "VERSION=" >>$config_mak
-head $source_path/VERSION >>$config_mak
-echo "" >>$config_mak
-echo -n "#define QEMU_VERSION \"" >> $config_h
-head $source_path/VERSION >> $config_h
-echo "\"" >> $config_h
+qemu_version=`head $source_path/VERSION`
+echo "VERSION=$qemu_version" >>$config_mak
+echo "#define QEMU_VERSION \"$qemu_version\"" >> $config_h
echo "SRC_PATH=$source_path" >> $config_mak
+if [ "$source_path_used" = "yes" ]; then
+ echo "VPATH=$source_path" >> $config_mak
+fi
echo "TARGET_DIRS=$target_list" >> $config_mak
+if [ "$build_docs" = "yes" ] ; then
+ echo "BUILD_DOCS=yes" >> $config_mak
+fi
# XXX: suppress that
if [ "$bsd" = "yes" ] ; then
fi
for target in $target_list; do
-
target_dir="$target"
config_mak=$target_dir/config.mak
config_h=$target_dir/config.h
if test "$target_user_only" = "no" -a "$check_gfx" = "yes" \
-a "$sdl" = "no" -a "$cocoa" = "no" ; then
echo "ERROR: QEMU requires SDL or Cocoa for graphical output"
- echo "To build QEMU with graphical output configure with --disable-gfx-check"
+ echo "To build QEMU without graphical output configure with --disable-gfx-check"
echo "Note that this will disable all output from the virtual graphics card."
exit 1;
fi
mkdir -p $target_dir/slirp
fi
-ln -sf $source_path/Makefile.target $target_dir/Makefile
+#
+# don't use ln -sf as not all "ln -sf" over write the file/link
+#
+rm -f $target_dir/Makefile
+ln -s $source_path/Makefile.target $target_dir/Makefile
+
echo "# Automatically generated by configure - do not modify" > $config_mak
echo "/* Automatically generated by configure - do not modify */" > $config_h
echo "#define TARGET_X86_64 1" >> $config_h
if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "x86_64" ; then
echo "#define USE_KQEMU 1" >> $config_h
- if test $kqemu_profile = "yes" ; then
- echo "#define CONFIG_KQEMU_PROFILE 1" >> $config_h
- fi
fi
elif test "$target_cpu" = "mips" -o "$target_cpu" = "mipsel" ; then
echo "TARGET_ARCH=mips" >> $config_mak
echo "#define TARGET_ARCH \"mips\"" >> $config_h
echo "#define TARGET_MIPS 1" >> $config_h
+elif test "$target_cpu" = "sh4" ; then
+ echo "TARGET_ARCH=sh4" >> $config_mak
+ echo "#define TARGET_ARCH \"sh4\"" >> $config_h
+ echo "#define TARGET_SH4 1" >> $config_h
else
echo "Unsupported target CPU"
exit 1
else
echo "SDL_LIBS=`$sdl_config --libs`" >> $config_mak
fi
- echo -n "SDL_CFLAGS=`$sdl_config --cflags`" >> $config_mak
if [ "${aa}" = "yes" ] ; then
- echo -n " `aalib-config --cflags`" >> $config_mak ;
+ echo "SDL_CFLAGS=`$sdl_config --cflags` `aalib-config --cflags`" >> $config_mak
+ else
+ echo "SDL_CFLAGS=`$sdl_config --cflags`" >> $config_mak
fi
- echo "" >> $config_mak
fi
fi
for dir in $DIRS ; do
mkdir -p $dir
done
+ # remove the link and recreate it, as not all "ln -sf" overwrite the link
for f in $FILES ; do
- ln -sf $source_path/$f $f
+ rm -f $f
+ ln -s $source_path/$f $f
done
fi