TMPO="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.o"
TMPE="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}"
TMPS="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.S"
-TMPH="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.h"
# default parameters
prefix="/usr/local"
-interp_prefix="/usr/gnemul/qemu-i386"
+interp_prefix="/usr/gnemul/qemu-%M"
+static="no"
cross_prefix=""
cc="gcc"
host_cc="gcc"
make="make"
strip="strip"
cpu=`uname -m`
+target_list="i386-user i386 i386-softmmu arm-user sparc-user"
case "$cpu" in
i386|i486|i586|i686|i86pc|BePC)
- cpu="x86"
+ cpu="i386"
;;
armv4l)
cpu="armv4l"
s390)
cpu="s390"
;;
+ sparc)
+ cpu="sparc"
+ ;;
+ sparc64)
+ cpu="sparc64"
+ ;;
+ ia64)
+ cpu="ia64"
+ ;;
+ m68k)
+ cpu="m68k"
+ ;;
*)
cpu="unknown"
;;
*) ;;
esac
+##########################################
+# SDL probe
+
+cat > $TMPC << EOF
+#include <SDL.h>
+#undef main /* We don't want SDL to override our main() */
+int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }
+EOF
+
+sdl_too_old=no
+sdl=no
+if $cc -o $TMPE `sdl-config --cflags` $TMPC `sdl-config --libs` 2> /dev/null ; then
+_sdlversion=`sdl-config --version | sed 's/[^0-9]//g'`
+if test "$_sdlversion" -lt 121 ; then
+sdl_too_old=yes
+else
+sdl=yes
+fi
+fi
+
# find source path
# XXX: we assume an absolute path is given when launching configure,
# except in './configure' case.
;;
--cpu=*) cpu=`echo $opt | cut -d '=' -f 2`
;;
+ --target-list=*) target_list=${opt#--target-list=}
+ ;;
--enable-gprof) gprof="yes"
;;
+ --static) static="yes"
+ ;;
+ --disable-sdl) sdl="no"
+ ;;
esac
done
else
# if cross compiling, cannot launch a program, so make a static guess
-if test "$cpu" = "powerpc" -o "$cpu" = "mips" -o "$cpu" = "s390" ; then
+if test "$cpu" = "powerpc" -o "$cpu" = "mips" -o "$cpu" = "s390" -o "$cpu" = "sparc" -o "$cpu" = "sparc64" -o "$cpu" = "m68k"; then
bigendian="yes"
fi
fi
-# check gcc version
+# check gcc options support
cat > $TMPC <<EOF
int main(void) {
-#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 2)
-return 0;
-#else
-#error gcc < 3.2
-#endif
}
EOF
-gcc_major="2"
-if $cc -o $TMPO $TMPC 2> /dev/null ; then
- gcc_major="3"
+have_gcc3_options="no"
+if $cc -fno-reorder-blocks -fno-optimize-sibling-calls -o $TMPO $TMPC 2> /dev/null ; then
+ have_gcc3_options="yes"
fi
if test x"$1" = x"-h" -o x"$1" = x"--help" ; then
echo "Standard options:"
echo " --help print this message"
echo " --prefix=PREFIX install in PREFIX [$prefix]"
-echo " --interp-prefix=PREFIX where to find shared libraries, etc. [$interp_prefix]"
+echo " --interp-prefix=PREFIX where to find shared libraries, etc."
+echo " use %M for cpu name [$interp_prefix]"
+echo " --target-list=LIST set target list [$target_list]"
echo ""
echo "Advanced options (experts only):"
echo " --source-path=PATH path of source code [$source_path]"
echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]"
echo " --cc=CC use C compiler CC [$cc]"
echo " --make=MAKE use specified make [$make]"
+echo " --static enable static build [$static]"
echo ""
echo "NOTE: The object files are build at the place where configure is launched"
exit 1
fi
-echo "Install prefix $prefix"
-echo "Source path $source_path"
-echo "C compiler $cc"
-echo "make $make"
-echo "CPU $cpu"
-echo "Big Endian $bigendian"
-echo "gprof enabled $gprof"
-
-echo "Creating config.mak and config.h"
-
-echo "# Automatically generated by configure - do not modify" > config.mak
-echo "/* Automatically generated by configure - do not modify */" > $TMPH
-
-echo "prefix=$prefix" >> config.mak
-echo "#define CONFIG_QEMU_PREFIX \"$interp_prefix\"" >> $TMPH
-echo "MAKE=$make" >> config.mak
-echo "CC=$cc" >> config.mak
-echo "GCC_MAJOR=$gcc_major" >> config.mak
-echo "HOST_CC=$host_cc" >> config.mak
-echo "AR=$ar" >> config.mak
-echo "STRIP=$strip -s -R .comment -R .note" >> config.mak
-echo "CFLAGS=$CFLAGS" >> config.mak
-echo "LDFLAGS=$LDFLAGS" >> config.mak
-if test "$cpu" = "x86" ; then
- echo "ARCH=i386" >> config.mak
- echo "#define HOST_I386 1" >> $TMPH
+mandir="$prefix/share/man"
+sharedir="$prefix/share/qemu"
+
+echo "Install prefix $prefix"
+echo "Manual directory $mandir"
+echo "BIOS directory $sharedir"
+echo "ELF interp prefix $interp_prefix"
+echo "Source path $source_path"
+echo "C compiler $cc"
+echo "make $make"
+echo "host CPU $cpu"
+echo "host big endian $bigendian"
+echo "target list $target_list"
+echo "gprof enabled $gprof"
+echo "static build $static"
+echo "SDL support $sdl"
+if test $sdl_too_old = "yes"; then
+echo "-> Your SDL version is too old - please upgrade to have FFplay/SDL support"
+fi
+
+config_mak="config-host.mak"
+config_h="config-host.h"
+
+echo "Creating $config_mak and $config_h"
+
+echo "# Automatically generated by configure - do not modify" > $config_mak
+echo "/* Automatically generated by configure - do not modify */" > $config_h
+
+echo "prefix=$prefix" >> $config_mak
+echo "mandir=$mandir" >> $config_mak
+echo "sharedir=$sharedir" >> $config_mak
+echo "#define CONFIG_QEMU_SHAREDIR \"$sharedir\"" >> $config_h
+echo "MAKE=$make" >> $config_mak
+echo "CC=$cc" >> $config_mak
+if test "$have_gcc3_options" = "yes" ; then
+ echo "HAVE_GCC3_OPTIONS=yes" >> $config_mak
+fi
+echo "HOST_CC=$host_cc" >> $config_mak
+echo "AR=$ar" >> $config_mak
+echo "STRIP=$strip -s -R .comment -R .note" >> $config_mak
+echo "CFLAGS=$CFLAGS" >> $config_mak
+echo "LDFLAGS=$LDFLAGS" >> $config_mak
+if test "$cpu" = "i386" ; then
+ echo "ARCH=i386" >> $config_mak
+ echo "#define HOST_I386 1" >> $config_h
elif test "$cpu" = "armv4l" ; then
- echo "ARCH=arm" >> config.mak
- echo "#define HOST_ARM 1" >> $TMPH
+ echo "ARCH=arm" >> $config_mak
+ echo "#define HOST_ARM 1" >> $config_h
elif test "$cpu" = "powerpc" ; then
- echo "ARCH=ppc" >> config.mak
- echo "#define HOST_PPC 1" >> $TMPH
+ echo "ARCH=ppc" >> $config_mak
+ echo "#define HOST_PPC 1" >> $config_h
elif test "$cpu" = "mips" ; then
- echo "ARCH=mips" >> config.mak
- echo "#define HOST_MIPS 1" >> $TMPH
+ echo "ARCH=mips" >> $config_mak
+ echo "#define HOST_MIPS 1" >> $config_h
elif test "$cpu" = "s390" ; then
- echo "ARCH=s390" >> config.mak
- echo "#define HOST_S390 1" >> $TMPH
+ echo "ARCH=s390" >> $config_mak
+ echo "#define HOST_S390 1" >> $config_h
elif test "$cpu" = "alpha" ; then
- echo "ARCH=alpha" >> config.mak
- echo "#define HOST_ALPHA 1" >> $TMPH
+ echo "ARCH=alpha" >> $config_mak
+ echo "#define HOST_ALPHA 1" >> $config_h
+elif test "$cpu" = "sparc" ; then
+ echo "ARCH=sparc" >> $config_mak
+ echo "#define HOST_SPARC 1" >> $config_h
+elif test "$cpu" = "sparc64" ; then
+ echo "ARCH=sparc64" >> $config_mak
+ echo "#define HOST_SPARC64 1" >> $config_h
+elif test "$cpu" = "ia64" ; then
+ echo "ARCH=ia64" >> $config_mak
+ echo "#define HOST_IA64 1" >> $config_h
+elif test "$cpu" = "m68k" ; then
+ echo "ARCH=m68k" >> config.mak
+ echo "#define HOST_M68K 1" >> $TMPH
else
echo "Unsupported CPU"
exit 1
fi
if test "$bigendian" = "yes" ; then
- echo "WORDS_BIGENDIAN=yes" >> config.mak
- echo "#define WORDS_BIGENDIAN 1" >> $TMPH
+ echo "WORDS_BIGENDIAN=yes" >> $config_mak
+ echo "#define WORDS_BIGENDIAN 1" >> $config_h
fi
+echo "#define HAVE_BYTESWAP_H 1" >> $config_h
if test "$gprof" = "yes" ; then
- echo "TARGET_GPROF=yes" >> config.mak
- echo "#define HAVE_GPROF 1" >> $TMPH
+ echo "TARGET_GPROF=yes" >> $config_mak
+ echo "#define HAVE_GPROF 1" >> $config_h
+fi
+if test "$static" = "yes" ; then
+ echo "CONFIG_STATIC=yes" >> $config_mak
fi
-echo -n "VERSION=" >>config.mak
-head $source_path/VERSION >>config.mak
-echo "" >>config.mak
-echo -n "#define QEMU_VERSION \"" >> $TMPH
-head $source_path/VERSION >> $TMPH
-echo "\"" >> $TMPH
+if test "$sdl" = "yes" ; then
+ echo "CONFIG_SDL=yes" >> $config_mak
+ echo "#define CONFIG_SDL 1" >> $config_h
+ echo "SDL_LIBS=`sdl-config --libs`" >> $config_mak
+ echo "SDL_CFLAGS=`sdl-config --cflags`" >> $config_mak
+fi
+echo -n "VERSION=" >>$config_mak
+head $source_path/VERSION >>$config_mak
+echo "" >>$config_mak
+echo -n "#define QEMU_VERSION \"" >> $config_h
+head $source_path/VERSION >> $config_h
+echo "\"" >> $config_h
+
+echo "SRC_PATH=$source_path" >> $config_mak
+echo "TARGET_DIRS=$target_list" >> $config_mak
+
+for target in $target_list; do
+
+target_dir="$target"
+config_mak=$target_dir/config.mak
+config_h=$target_dir/config.h
+target_cpu=`echo $target | cut -d '-' -f 1`
+target_bigendian="no"
+[ "$target_cpu" = "sparc" ] && target_bigendian=yes
+target_softmmu="no"
+if expr $target : '.*-softmmu' > /dev/null ; then
+ target_softmmu="yes"
+fi
+target_user_only="no"
+if expr $target : '.*-user' > /dev/null ; then
+ target_user_only="yes"
+fi
+
+echo "Creating $config_mak, $config_h and $target_dir/Makefile"
+
+mkdir -p $target_dir
+ln -sf $source_path/Makefile.target $target_dir/Makefile
+
+echo "# Automatically generated by configure - do not modify" > $config_mak
+echo "/* Automatically generated by configure - do not modify */" > $config_h
+
+
+echo "include ../config-host.mak" >> $config_mak
+echo "#include \"../config-host.h\"" >> $config_h
+
+interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_cpu/g"`
+echo "#define CONFIG_QEMU_PREFIX \"$interp_prefix1\"" >> $config_h
+
+if test "$target_cpu" = "i386" ; then
+ echo "TARGET_ARCH=i386" >> $config_mak
+ echo "#define TARGET_ARCH \"i386\"" >> $config_h
+ echo "#define TARGET_I386 1" >> $config_h
+elif test "$target_cpu" = "arm" ; then
+ echo "TARGET_ARCH=arm" >> $config_mak
+ echo "#define TARGET_ARCH \"arm\"" >> $config_h
+ echo "#define TARGET_ARM 1" >> $config_h
+elif test "$target_cpu" = "sparc" ; then
+ echo "TARGET_ARCH=sparc" >> $config_mak
+ echo "#define TARGET_ARCH \"sparc\"" >> $config_h
+ echo "#define TARGET_SPARC 1" >> $config_h
+else
+ echo "Unsupported target CPU"
+ exit 1
+fi
+if test "$target_bigendian" = "yes" ; then
+ echo "TARGET_WORDS_BIGENDIAN=yes" >> $config_mak
+ echo "#define TARGET_WORDS_BIGENDIAN 1" >> $config_h
+fi
+if test "$target_softmmu" = "yes" ; then
+ echo "CONFIG_SOFTMMU=yes" >> $config_mak
+ echo "#define CONFIG_SOFTMMU 1" >> $config_h
+fi
+if test "$target_user_only" = "yes" ; then
+ echo "CONFIG_USER_ONLY=yes" >> $config_mak
+ echo "#define CONFIG_USER_ONLY 1" >> $config_h
+fi
+
+done # for target in $targets
# build tree in object directory if source path is different from current one
if test "$source_path_used" = "yes" ; then
ln -sf $source_path/$f $f
done
fi
-echo "SRC_PATH=$source_path" >> config.mak
-
-diff $TMPH config.h >/dev/null 2>&1
-if test $? -ne 0 ; then
- mv -f $TMPH config.h
-else
- echo "config.h is unchanged"
-fi
-rm -f $TMPO $TMPC $TMPE $TMPS $TMPH
+rm -f $TMPO $TMPC $TMPE $TMPS
projects / qemu / blobdiff