include config.mak
-VPATH=$(SRC_PATH)
+TARGET_PATH=$(SRC_PATH)/target-$(TARGET_ARCH)
+VPATH=$(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw
+DEFINES=-I. -I$(TARGET_PATH) -I$(SRC_PATH)
+ifdef CONFIG_USER_ONLY
+VPATH+=:$(SRC_PATH)/linux-user
+DEFINES+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ARCH)
+endif
CFLAGS=-Wall -O2 -g
LDFLAGS=-g
LIBS=
-DEFINES=-I.
HELPER_CFLAGS=$(CFLAGS)
-DYNGEN=../dyngen
+DYNGEN=../dyngen$(EXESUF)
+# user emulator name
+QEMU_USER=qemu-$(TARGET_ARCH)
+# system emulator name
+ifdef CONFIG_SOFTMMU
+QEMU_SYSTEM=qemu$(EXESUF)
+else
+QEMU_SYSTEM=qemu-fast
+endif
+
+ifdef CONFIG_USER_ONLY
+PROGS=$(QEMU_USER)
+else
+ifeq ($(TARGET_ARCH), i386)
+
+ifeq ($(ARCH), i386)
+PROGS+=$(QEMU_SYSTEM)
ifndef CONFIG_SOFTMMU
-PROGS=qemu
+CONFIG_STATIC=y
+endif
+else
+# the system emulator using soft mmu is portable
+ifdef CONFIG_SOFTMMU
+PROGS+=$(QEMU_SYSTEM)
+endif
+endif # ARCH != i386
+
+endif # TARGET_ARCH = i386
+
+ifeq ($(TARGET_ARCH), ppc)
+
+ifeq ($(ARCH), ppc)
+PROGS+=$(QEMU_SYSTEM)
endif
+ifeq ($(ARCH), i386)
+ifdef CONFIG_SOFTMMU
+PROGS+=$(QEMU_SYSTEM)
+endif
+endif # ARCH = i386
+
+endif # TARGET_ARCH = ppc
+endif # !CONFIG_USER_ONLY
+
ifdef CONFIG_STATIC
LDFLAGS+=-static
endif
else
OP_CFLAGS+= -malign-functions=0
endif
+
ifdef TARGET_GPROF
+USE_I386_LD=y
+endif
+ifdef CONFIG_STATIC
+USE_I386_LD=y
+endif
+ifdef USE_I386_LD
LDFLAGS+=-Wl,-T,$(SRC_PATH)/i386.ld
else
# WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
# is the simplest way to make it self virtualizable!
LDFLAGS+=-Wl,-shared
endif
-ifeq ($(TARGET_ARCH), i386)
-PROGS+=vl
endif
+
+ifeq ($(ARCH),amd64)
+OP_CFLAGS=$(CFLAGS) -falign-functions=0
+LDFLAGS+=-Wl,-T,$(SRC_PATH)/amd64.ld
endif
ifeq ($(ARCH),ppc)
DEFINES+=-D_GNU_SOURCE
LIBS+=-lm
+ifdef CONFIG_WIN32
+LIBS+=-lwinmm
+endif
# profiling code
ifdef TARGET_GPROF
main.o: CFLAGS+=-p
endif
-OBJS= elfload.o main.o syscall.o mmap.o signal.o path.o
+OBJS= elfload.o main.o syscall.o mmap.o signal.o path.o osdep.o thunk.o
ifeq ($(TARGET_ARCH), i386)
OBJS+= vm86.o
endif
+ifeq ($(TARGET_ARCH), arm)
+OBJS+=nwfpe/softfloat.o nwfpe/fpa11.o nwfpe/fpa11_cpdo.o \
+nwfpe/fpa11_cpdt.o nwfpe/fpa11_cprt.o nwfpe/fpopcode.o nwfpe/single_cpdo.o \
+ nwfpe/double_cpdo.o nwfpe/extended_cpdo.o
+endif
SRCS:= $(OBJS:.o=.c)
OBJS+= libqemu.a
# cpu emulator library
-LIBOBJS=thunk.o exec.o translate.o cpu-exec.o gdbstub.o
+LIBOBJS=exec.o translate-all.o cpu-exec.o\
+ translate.o op.o
ifeq ($(TARGET_ARCH), i386)
-LIBOBJS+=translate-i386.o op-i386.o helper-i386.o helper2-i386.o
+LIBOBJS+=helper.o helper2.o
+ifeq ($(ARCH), i386)
+LIBOBJS+=translate-copy.o
endif
-ifeq ($(TARGET_ARCH), arm)
-LIBOBJS+=translate-arm.o op-arm.o
+endif
+
+ifeq ($(TARGET_ARCH), ppc)
+LIBOBJS+= op_helper.o helper.o
endif
# NOTE: the disassembler code is only needed for debugging
LIBOBJS+=disas.o
ifeq ($(findstring i386, $(TARGET_ARCH) $(ARCH)),i386)
+USE_I386_DIS=y
+endif
+ifeq ($(findstring amd64, $(TARGET_ARCH) $(ARCH)),amd64)
+USE_I386_DIS=y
+endif
+ifdef USE_I386_DIS
LIBOBJS+=i386-dis.o
endif
ifeq ($(findstring alpha, $(TARGET_ARCH) $(ARCH)),alpha)
OBJS += ia64-syscall.o
endif
-all: $(PROGS) qemu-doc.html
+all: $(PROGS)
-qemu: $(OBJS)
+$(QEMU_USER): $(OBJS)
$(CC) $(LDFLAGS) -o $@ $^ $(LIBS)
ifeq ($(ARCH),alpha)
# Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
endif
# must use static linking to avoid leaving stuff in virtual address space
-VL_OBJS=vl.o block.o vga.o
+VL_OBJS=vl.o osdep.o block.o monitor.o \
+ ide.o ne2000.o pckbd.o vga.o sb16.o dma.o oss.o \
+ fdc.o mc146818rtc.o serial.o i8259.o i8254.o pc.o
+ifdef CONFIG_GDBSTUB
+VL_OBJS+=gdbstub.o
+endif
+ifeq ($(TARGET_ARCH), ppc)
+VL_OBJS+= hw.o
+endif
ifdef CONFIG_SDL
VL_OBJS+=sdl.o
-SDL_LIBS+=-L/usr/X11R6/lib -lX11 -lXext -lXv -ldl -lm
+ifdef CONFIG_STATIC
+SDL_LIBS:=$(SDL_STATIC_LIBS)
+endif
endif
-vl: $(VL_OBJS) libqemu.a
- $(CC) -static -Wl,-T,$(SRC_PATH)/i386-vl.ld -o $@ $^ $(LIBS) $(SDL_LIBS)
+VL_LDFLAGS=
+# specific flags are needed for non soft mmu emulator
+ifdef CONFIG_STATIC
+VL_LDFLAGS+=-static
+endif
+ifndef CONFIG_SOFTMMU
+VL_LDFLAGS+=-Wl,-T,$(SRC_PATH)/i386-vl.ld
+endif
+ifndef CONFIG_WIN32
+VL_LIBS=-lutil
+endif
+
+$(QEMU_SYSTEM): $(VL_OBJS) libqemu.a
+ $(CC) $(VL_LDFLAGS) -o $@ $^ $(LIBS) $(SDL_LIBS) $(VL_LIBS)
sdl.o: sdl.c
$(CC) $(CFLAGS) $(DEFINES) $(SDL_CFLAGS) -c -o $@ $<
depend: $(SRCS)
- $(CC) -MM $(CFLAGS) $^ 1>.depend
+ $(CC) -MM $(CFLAGS) $(DEFINES) $^ 1>.depend
# libqemu
rm -f $@
$(AR) rcs $@ $(LIBOBJS)
-translate-$(TARGET_ARCH).o: translate-$(TARGET_ARCH).c gen-op-$(TARGET_ARCH).h opc-$(TARGET_ARCH).h cpu-$(TARGET_ARCH).h
+translate.o: translate.c gen-op.h opc.h cpu.h
-translate.o: translate.c op-$(TARGET_ARCH).h opc-$(TARGET_ARCH).h cpu-$(TARGET_ARCH).h
+translate-all.o: translate-all.c op.h opc.h cpu.h
-op-$(TARGET_ARCH).h: op-$(TARGET_ARCH).o $(DYNGEN)
+op.h: op.o $(DYNGEN)
$(DYNGEN) -o $@ $<
-opc-$(TARGET_ARCH).h: op-$(TARGET_ARCH).o $(DYNGEN)
+opc.h: op.o $(DYNGEN)
$(DYNGEN) -c -o $@ $<
-gen-op-$(TARGET_ARCH).h: op-$(TARGET_ARCH).o $(DYNGEN)
+gen-op.h: op.o $(DYNGEN)
$(DYNGEN) -g -o $@ $<
-op-$(TARGET_ARCH).o: op-$(TARGET_ARCH).c
+op.o: op.c
$(CC) $(OP_CFLAGS) $(DEFINES) -c -o $@ $<
-helper-$(TARGET_ARCH).o: helper-$(TARGET_ARCH).c
+helper.o: helper.c
$(CC) $(HELPER_CFLAGS) $(DEFINES) -c -o $@ $<
-op-i386.o: op-i386.c opreg_template.h ops_template.h ops_template_mem.h ops_mem.h
+ifeq ($(TARGET_ARCH), i386)
+op.o: op.c opreg_template.h ops_template.h ops_template_mem.h ops_mem.h
+endif
+
+ifeq ($(TARGET_ARCH), arm)
+op.o: op.c op_template.h
+endif
+
+ifeq ($(TARGET_ARCH), sparc)
+op.o: op.c op_template.h
+endif
-op-arm.o: op-arm.c op-arm-template.h
+ifeq ($(TARGET_ARCH), ppc)
+op.o: op.c op_template.h op_mem.h
+op_helper.o: op_helper_mem.h
+endif
%.o: %.c
$(CC) $(CFLAGS) $(DEFINES) -c -o $@ $<
+%.o: %.S
+ $(CC) $(DEFINES) -c -o $@ $<
+
clean:
- rm -f *.o *.a *~ $(PROGS) \
- gen-op-$(TARGET_ARCH).h opc-$(TARGET_ARCH).h op-$(TARGET_ARCH).h
+ rm -f *.o *.a *~ $(PROGS) gen-op.h opc.h op.h nwfpe/*.o
+
+install: all
+ifneq ($(PROGS),)
+ install -m 755 -s $(PROGS) "$(bindir)"
+endif
ifneq ($(wildcard .depend),)
include .depend