-include config.mak
+include config-host.mak
CFLAGS=-Wall -O2 -g
LDFLAGS=-g
LIBS=
-DEFINES=-DHAVE_BYTESWAP_H
-
-ifeq ($(ARCH),i386)
-CFLAGS+=-fomit-frame-pointer
-OP_CFLAGS=$(CFLAGS) -mpreferred-stack-boundary=2
-ifeq ($(GCC_MAJOR),3)
-OP_CFLAGS+= -falign-functions=0
-else
-OP_CFLAGS+= -malign-functions=0
-endif
-endif
-
-ifeq ($(ARCH),ppc)
-OP_CFLAGS=$(CFLAGS)
-endif
-
-ifeq ($(ARCH),s390)
-OP_CFLAGS=$(CFLAGS)
-endif
-
-ifeq ($(GCC_MAJOR),3)
-# very important to generate a return at the end of every operation
-OP_CFLAGS+=-fno-reorder-blocks -fno-optimize-sibling-calls
-endif
-
-#########################################################
-
DEFINES+=-D_GNU_SOURCE
-LDSCRIPT=$(ARCH).ld
-LIBS+=-lm
-
-# profiling code
-ifdef TARGET_GPROF
-LDFLAGS+=-p
-main.o: CFLAGS+=-p
-endif
+TOOLS=qemu-mkcow
-OBJS= elfload.o main.o syscall.o signal.o
-SRCS:= $(OBJS:.o=.c)
-OBJS+= libqemu.a
+all: dyngen $(TOOLS) qemu-doc.html qemu.1
+ for d in $(TARGET_DIRS); do \
+ make -C $$d $@ || exit 1 ; \
+ done
-LIBOBJS+=thunk.o translate-i386.o op-i386.o exec-i386.o
-# NOTE: the disassembler code is only needed for debugging
-LIBOBJS+=i386-dis.o dis-buf.o
+qemu-mkcow: qemu-mkcow.o
+ $(HOST_CC) -o $@ $^ $(LIBS)
-all: qemu qemu-doc.html
-
-qemu: $(OBJS)
- $(CC) -Wl,-T,$(LDSCRIPT) $(LDFLAGS) -o $@ $^ $(LIBS)
-
-depend: $(SRCS)
- $(CC) -MM $(CFLAGS) $^ 1>.depend
-
-# libqemu
-
-libqemu.a: $(LIBOBJS)
- rm -f $@
- $(AR) rcs $@ $(LIBOBJS)
-
-dyngen: dyngen.c
- $(HOST_CC) -O2 -Wall -g $< -o $@
-
-translate-i386.o: translate-i386.c op-i386.h cpu-i386.h
-
-op-i386.h: op-i386.o dyngen
- ./dyngen -o $@ $<
-
-op-i386.o: op-i386.c opreg_template.h ops_template.h
- $(CC) $(OP_CFLAGS) $(DEFINES) -c -o $@ $<
+dyngen: dyngen.o
+ $(HOST_CC) -o $@ $^ $(LIBS)
%.o: %.c
- $(CC) $(CFLAGS) $(DEFINES) -c -o $@ $<
+ $(HOST_CC) $(CFLAGS) $(DEFINES) -c -o $@ $<
clean:
- $(MAKE) -C tests clean
- rm -f *.o *.a *~ qemu dyngen TAGS
+# avoid old build problems by removing potentially incorrect old files
+ rm -f config.mak config.h op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
+ rm -f *.o *.a $(TOOLS) dyngen TAGS qemu.pod
+ make -C tests clean
+ for d in $(TARGET_DIRS); do \
+ make -C $$d $@ || exit 1 ; \
+ done
distclean: clean
- rm -f config.mak config.h
-
-install: qemu
- install -m 755 -s qemu $(prefix)/bin
+ rm -f config-host.mak config-host.h
+ for d in $(TARGET_DIRS); do \
+ rm -rf $$d || exit 1 ; \
+ done
+
+install: all
+ mkdir -p $(prefix)/bin
+ install -m 755 -s $(TOOLS) $(prefix)/bin
+ mkdir -p $(sharedir)
+ install -m 644 pc-bios/bios.bin pc-bios/vgabios.bin \
+ pc-bios/linux_boot.bin $(sharedir)
+ mkdir -p $(mandir)/man1
+ install qemu.1 $(mandir)/man1
+ for d in $(TARGET_DIRS); do \
+ make -C $$d $@ || exit 1 ; \
+ done
# various test targets
-test speed: qemu
+test speed test2: all
make -C tests $@
TAGS:
- etags *.[ch] i386/*.[ch]
+ etags *.[ch] tests/*.[ch]
# documentation
qemu-doc.html: qemu-doc.texi
texi2html -monolithic -number $<
-FILES= \
-README README.distrib COPYING COPYING.LIB TODO Changelog VERSION \
-dyngen.c ioctls.h ops_template.h op_string.h syscall_types.h\
-Makefile elf.h linux_bin.h segment.h thunk.c\
-elfload.c main.c signal.c thunk.h\
-cpu-i386.h qemu.h op-i386.c opc-i386.h syscall-i386.h translate-i386.c\
-dis-asm.h gen-i386.h op-i386.h syscall.c\
-dis-buf.c i386-dis.c opreg_template.h syscall_defs.h\
-i386.ld ppc.ld s390.ld exec-i386.h exec-i386.c configure \
-tests/Makefile\
-tests/test-i386.c tests/test-i386-shift.h tests/test-i386.h\
-tests/test-i386-muldiv.h tests/test-i386-code16.S\
-tests/hello.c tests/hello tests/sha1.c \
-tests/testsig.c tests/testclone.c tests/testthread.c \
-tests/runcom.c tests/pi_10.com \
-qemu-doc.texi qemu-doc.html
-
-FILE=qemu-$(VERSION)
+qemu.1: qemu-doc.texi
+ ./texi2pod.pl $< qemu.pod
+ pod2man --section=1 --center=" " --release=" " qemu.pod > $@
+FILE=qemu-$(shell cat VERSION)
+
+# tar release (use 'make -k tar' on a checkouted tree)
tar:
rm -rf /tmp/$(FILE)
- mkdir -p /tmp/$(FILE)
- cp -P $(FILES) /tmp/$(FILE)
- ( cd /tmp ; tar zcvf ~/$(FILE).tar.gz $(FILE) )
+ cp -r . /tmp/$(FILE)
+ ( cd /tmp ; tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS )
rm -rf /tmp/$(FILE)
-# generate a binary distribution including the test binary environnment
-BINPATH=/usr/local/qemu-i386
-
+# generate a binary distribution
tarbin:
- tar zcvf /tmp/qemu-i386-glibc21.tar.gz \
- $(BINPATH)/etc $(BINPATH)/lib $(BINPATH)/bin
- tar zcvf /tmp/qemu-i386-wine.tar.gz \
- $(BINPATH)/X11R6 $(BINPATH)/wine
+ ( cd / ; tar zcvf ~/qemu-$(VERSION)-i386.tar.gz \
+ $(prefix)/bin/qemu $(prefix)/bin/qemu-fast \
+ $(prefix)/bin/qemu-i386 \
+ $(prefix)/bin/qemu-arm \
+ $(prefix)/bin/qemu-sparc \
+ $(prefix)/bin/qemu-ppc \
+ $(sharedir)/bios.bin \
+ $(sharedir)/vgabios.bin \
+ $(mandir)/man1/qemu.1 )
ifneq ($(wildcard .depend),)
include .depend
projects / qemu / blobdiff