+sendkey ctrl-alt-f1
+@end example
+
+This command is useful to send keys that your graphical user interface
+intercepts at low level, such as @code{ctrl-alt-f1} in X Window.
+
+@item system_reset
+
+Reset the system.
+
+@item usb_add devname
+
+Plug the USB device devname to the QEMU virtual USB hub. @var{devname}
+is either a virtual device name (for example @code{mouse}) or a host
+USB device identifier. Host USB device identifiers have the following
+syntax: @code{host:bus.addr} or @code{host:vendor_id:product_id}.
+
+@item usb_del devname
+
+Remove the USB device @var{devname} from the QEMU virtual USB
+hub. @var{devname} has the syntax @code{bus.addr}. Use the monitor
+command @code{info usb} to see the devices you can remove.
+
+@end table
+
+@subsection Integer expressions
+
+The monitor understands integers expressions for every integer
+argument. You can use register names to get the value of specifics
+CPU registers by prefixing them with @emph{$}.
+
+@node disk_images
+@section Disk Images
+
+Since version 0.6.1, QEMU supports many disk image formats, including
+growable disk images (their size increase as non empty sectors are
+written), compressed and encrypted disk images.
+
+@menu
+* disk_images_quickstart:: Quick start for disk image creation
+* disk_images_snapshot_mode:: Snapshot mode
+* qemu_img_invocation:: qemu-img Invocation
+* disk_images_fat_images:: Virtual FAT disk images
+@end menu
+
+@node disk_images_quickstart
+@subsection Quick start for disk image creation
+
+You can create a disk image with the command:
+@example
+qemu-img create myimage.img mysize
+@end example
+where @var{myimage.img} is the disk image filename and @var{mysize} is its
+size in kilobytes. You can add an @code{M} suffix to give the size in
+megabytes and a @code{G} suffix for gigabytes.
+
+See @ref{qemu_img_invocation} for more information.
+
+@node disk_images_snapshot_mode
+@subsection Snapshot mode
+
+If you use the option @option{-snapshot}, all disk images are
+considered as read only. When sectors in written, they are written in
+a temporary file created in @file{/tmp}. You can however force the
+write back to the raw disk images by using the @code{commit} monitor
+command (or @key{C-a s} in the serial console).
+
+@node qemu_img_invocation
+@subsection @code{qemu-img} Invocation
+
+@include qemu-img.texi
+
+@node disk_images_fat_images
+@subsection Virtual FAT disk images
+
+QEMU can automatically create a virtual FAT disk image from a
+directory tree. In order to use it, just type:
+
+@example
+qemu linux.img -hdb fat:/my_directory
+@end example
+
+Then you access access to all the files in the @file{/my_directory}
+directory without having to copy them in a disk image or to export
+them via SAMBA or NFS. The default access is @emph{read-only}.
+
+Floppies can be emulated with the @code{:floppy:} option:
+
+@example
+qemu linux.img -fda fat:floppy:/my_directory
+@end example
+
+A read/write support is available for testing (beta stage) with the
+@code{:rw:} option:
+
+@example
+qemu linux.img -fda fat:floppy:rw:/my_directory
+@end example
+
+What you should @emph{never} do:
+@itemize
+@item use non-ASCII filenames ;
+@item use "-snapshot" together with ":rw:" ;
+@item expect it to work when loadvm'ing ;
+@item write to the FAT directory on the host system while accessing it with the guest system.
+@end itemize
+
+@node pcsys_network
+@section Network emulation
+
+QEMU can simulate several networks cards (NE2000 boards on the PC
+target) and can connect them to an arbitrary number of Virtual Local
+Area Networks (VLANs). Host TAP devices can be connected to any QEMU
+VLAN. VLAN can be connected between separate instances of QEMU to
+simulate large networks. For simpler usage, a non priviledged user mode
+network stack can replace the TAP device to have a basic network
+connection.
+
+@subsection VLANs
+
+QEMU simulates several VLANs. A VLAN can be symbolised as a virtual
+connection between several network devices. These devices can be for
+example QEMU virtual Ethernet cards or virtual Host ethernet devices
+(TAP devices).
+
+@subsection Using TAP network interfaces
+
+This is the standard way to connect QEMU to a real network. QEMU adds
+a virtual network device on your host (called @code{tapN}), and you
+can then configure it as if it was a real ethernet card.
+
+As an example, you can download the @file{linux-test-xxx.tar.gz}
+archive and copy the script @file{qemu-ifup} in @file{/etc} and
+configure properly @code{sudo} so that the command @code{ifconfig}
+contained in @file{qemu-ifup} can be executed as root. You must verify
+that your host kernel supports the TAP network interfaces: the
+device @file{/dev/net/tun} must be present.
+
+See @ref{direct_linux_boot} to have an example of network use with a
+Linux distribution and @ref{sec_invocation} to have examples of
+command lines using the TAP network interfaces.
+
+@subsection Using the user mode network stack
+
+By using the option @option{-net user} (default configuration if no
+@option{-net} option is specified), QEMU uses a completely user mode
+network stack (you don't need root priviledge to use the virtual
+network). The virtual network configuration is the following:
+
+@example
+
+ QEMU VLAN <------> Firewall/DHCP server <-----> Internet
+ | (10.0.2.2)
+ |
+ ----> DNS server (10.0.2.3)
+ |
+ ----> SMB server (10.0.2.4)
+@end example
+
+The QEMU VM behaves as if it was behind a firewall which blocks all
+incoming connections. You can use a DHCP client to automatically
+configure the network in the QEMU VM. The DHCP server assign addresses
+to the hosts starting from 10.0.2.15.
+
+In order to check that the user mode network is working, you can ping
+the address 10.0.2.2 and verify that you got an address in the range
+10.0.2.x from the QEMU virtual DHCP server.
+
+Note that @code{ping} is not supported reliably to the internet as it
+would require root priviledges. It means you can only ping the local
+router (10.0.2.2).
+
+When using the built-in TFTP server, the router is also the TFTP
+server.
+
+When using the @option{-redir} option, TCP or UDP connections can be
+redirected from the host to the guest. It allows for example to
+redirect X11, telnet or SSH connections.
+
+@subsection Connecting VLANs between QEMU instances
+
+Using the @option{-net socket} option, it is possible to make VLANs
+that span several QEMU instances. See @ref{sec_invocation} to have a
+basic example.
+
+@node direct_linux_boot
+@section Direct Linux Boot
+
+This section explains how to launch a Linux kernel inside QEMU without
+having to make a full bootable image. It is very useful for fast Linux
+kernel testing. The QEMU network configuration is also explained.
+
+@enumerate
+@item
+Download the archive @file{linux-test-xxx.tar.gz} containing a Linux
+kernel and a disk image.
+
+@item Optional: If you want network support (for example to launch X11 examples), you
+must copy the script @file{qemu-ifup} in @file{/etc} and configure
+properly @code{sudo} so that the command @code{ifconfig} contained in
+@file{qemu-ifup} can be executed as root. You must verify that your host
+kernel supports the TUN/TAP network interfaces: the device
+@file{/dev/net/tun} must be present.
+
+When network is enabled, there is a virtual network connection between
+the host kernel and the emulated kernel. The emulated kernel is seen
+from the host kernel at IP address 172.20.0.2 and the host kernel is
+seen from the emulated kernel at IP address 172.20.0.1.
+
+@item Launch @code{qemu.sh}. You should have the following output:
+
+@smallexample
+> ./qemu.sh
+Connected to host network interface: tun0
+Linux version 2.4.21 (bellard@@voyager.localdomain) (gcc version 3.2.2 20030222 @/(Red Hat @/Linux 3.2.2-5)) #5 Tue Nov 11 18:18:53 CET 2003
+BIOS-provided physical RAM map: