--- /dev/null
+--- mod_gzip.c-old Fri Jan 26 10:50:05 2001
++++ mod_gzip.c Fri Jan 26 15:08:26 2001
+@@ -575,10 +575,15 @@
+ * The GZP request control structure...
+ */
+
++#define GZIP_FORMAT (0)
++#define DEFLATE_FORMAT (1)
++
+ typedef struct _GZP_CONTROL {
+
+ int decompress; /* 0=Compress 1=Decompress */
+
++ int compression_format; /* GZIP_FORMAT or DEFLATE_FORMAT */
++
+ /* Input control... */
+
+ int input_ismem; /* Input source is memory buffer, not file */
+@@ -2209,10 +2214,11 @@
+ mod_gzip_printf( "%s: Checking for 'gzip' designator...\n",cn);
+ #endif
+
+- if ( strstr( has_encoding, "gzip" ) )
++ if ( strstr( has_encoding, "gzip" ) ||
++ strstr( has_encoding, "deflate" ) )
+ {
+ #ifdef MOD_GZIP_DEBUG1
+- mod_gzip_printf( "%s: 'Content-encoding:' field contains 'gzip' designator...\n",cn);
++ mod_gzip_printf( "%s: 'Content-encoding:' field contains 'gzip' or 'deflate' designator...\n",cn);
+ mod_gzip_printf( "%s: Pre-compression is assumed.\n",cn);
+ mod_gzip_printf( "%s: Exit > return( DECLINED ) >\n",cn);
+ #endif
+@@ -2237,7 +2243,7 @@
+ else /* 'gzip' designator not found... */
+ {
+ #ifdef MOD_GZIP_DEBUG1
+- mod_gzip_printf( "%s: 'Content-encoding:' field does NOT contain 'gzip' designator...\n",cn);
++ mod_gzip_printf( "%s: 'Content-encoding:' field does NOT contain 'gzip' or 'deflate' designator...\n",cn);
+ mod_gzip_printf( "%s: Assuming OK to proceed...\n",cn);
+ #endif
+ }
+@@ -2347,10 +2353,21 @@
+ if ( accept_encoding )
+ {
+ /* ...and if it has the right 'gzip' indicator... */
+-
++ /* We record the compression format in a request note, so we
++ * can get it again later, and so it can potentially be logged.
++ */
+ if ( strstr( accept_encoding, "gzip" ) )
+ {
+ process = 1; /* ...set the 'process' flag TRUE */
++ ap_table_setn( r->notes,"mod_gzip_compression_format",
++ ap_pstrdup(r->pool,"gzip"));
++
++ }
++ else if ( strstr( accept_encoding, "deflate" ) )
++ {
++ process = 1; /* ...set the 'process' flag TRUE */
++ ap_table_setn( r->notes,"mod_gzip_compression_format",
++ ap_pstrdup(r->pool,"deflate"));
+ }
+
+ }/* End 'if( accept_encoding )' */
+@@ -2388,7 +2405,7 @@
+ else /* 'gzip' designator was seen in 'Accept-Encoding:' field */
+ {
+ #ifdef MOD_GZIP_DEBUG1
+- mod_gzip_printf( "%s: 'gzip' capability specified by user-agent.\n",cn);
++ mod_gzip_printf( "%s: 'gzip' or 'deflate' capability specified by user-agent.\n",cn);
+ mod_gzip_printf( "%s: Assuming OK to proceed...\n",cn);
+ #endif
+ }
+@@ -4093,7 +4110,8 @@
+
+ char tmp[ MOD_GZIP_LARGE_BUFFER_SIZE + 2 ]; /* Scratch buffer */
+
+- char actual_content_encoding_name[] = "gzip"; /* Adjustable */
++ char *actual_content_encoding_name = "gzip"; /* Adjustable */
++ const char *compression_format;
+
+ #ifdef MOD_GZIP_DEBUG1
+ char cn[]="mod_gzip_encode_and_transmit()";
+@@ -4470,6 +4488,18 @@
+
+ gzp->decompress = 0; /* Perform encoding */
+
++ /* Recover the compression format we're supposed to use. */
++ compression_format = ap_table_get(r->notes, "mod_gzip_compression_format");
++ if (compression_format && strcmp(compression_format, "deflate") == 0)
++ {
++ actual_content_encoding_name = "deflate";
++ gzp->compression_format = DEFLATE_FORMAT;
++ }
++ else
++ {
++ gzp->compression_format = GZIP_FORMAT;
++ }
++
+ if ( input_size <= (long) conf->maximum_inmem_size )
+ {
+ /* The input source is small enough to compress directly */
+@@ -4591,6 +4621,7 @@
+
+ #ifdef MOD_GZIP_DEBUG1
+ mod_gzip_printf( "%s: gzp->decompress = %d\n" ,cn,gzp->decompress);
++ mod_gzip_printf( "%s: gzp->compression_format = %d\n",cn,gzp->compression_format);
+ mod_gzip_printf( "%s: gzp->input_ismem = %d\n", cn,gzp->input_ismem);
+ mod_gzip_printf( "%s: gzp->output_ismem = %d\n", cn,gzp->output_ismem);
+ mod_gzip_printf( "%s: gzp->input_filename = [%s]\n",cn,gzp->input_filename);
+@@ -7256,6 +7287,8 @@
+ };
+
+ typedef struct _GZ1 {
++ long compression_format;
++
+ long versionid1;
+ int state;
+ int done;
+@@ -7345,6 +7378,7 @@
+ int dbits;
+ ulg window_size;
+ ulg crc;
++ ulg adler;
+
+ uch dist_code[512];
+ uch length_code[MAX_MATCH-MIN_MATCH+1];
+@@ -7449,6 +7483,15 @@
+
+ void error( char *msg );
+
++/* XXX - Precomputed zlib header. If you change the window size or
++ * compression level from the defaults, this will break badly. The
++ * algorithm to build this is fairly complex; you can find it in
++ * the file deflate.c from the zlib distribution.
++ */
++#define ZLIB_HEADER "\170\9c"
++
++ulg adler32(ulg adler, uch *buf, unsigned len);
++
+ int zip(
+ PGZ1 gz1,
+ int in,
+@@ -9088,10 +9131,20 @@
+ if ( len == (unsigned)(-1) || len == 0 )
+ {
+ gz1->crc = gz1->crc ^ 0xffffffffL;
++ /* XXX - Do we need to do something with Adler CRC's here?
++ * I don't think so--they don't seem to need postprocessing. */
+ return (int)len;
+ }
+
+- updcrc( gz1, (uch*)buf, len );
++ if (gz1->compression_format != DEFLATE_FORMAT)
++ {
++ updcrc( gz1, (uch*)buf, len );
++ }
++ else
++ {
++ gz1->adler = adler32(gz1->adler, (uch*)buf, len);
++ }
++
+ gz1->bytes_in += (ulg)len;
+
+ return (int)len;
+@@ -9288,6 +9341,7 @@
+ gz1->heap[k] = v;
+ }
+
++
+ #define GZS_ZIP1 1
+ #define GZS_ZIP2 2
+ #define GZS_DEFLATE1 3
+@@ -9317,6 +9371,7 @@
+ }
+
+ gz1->decompress = gzp->decompress;
++ gz1->compression_format = gzp->compression_format;
+
+ strcpy( gz1->ifname, gzp->input_filename );
+ strcpy( gz1->ofname, gzp->output_filename );
+@@ -9489,6 +9544,7 @@
+ return( rc );
+ }
+
++
+ int gzs_zip1( PGZ1 gz1 )
+ {
+ uch flags = 0;
+@@ -9499,21 +9555,40 @@
+
+ gz1->method = DEFLATED;
+
+- put_byte(GZIP_MAGIC[0]);
+- put_byte(GZIP_MAGIC[1]);
+- put_byte(DEFLATED);
++ if (gz1->compression_format != DEFLATE_FORMAT)
++ {
++ put_byte(GZIP_MAGIC[0]);
++ put_byte(GZIP_MAGIC[1]);
++ put_byte(DEFLATED);
++ }
++ else
++ {
++ /* Yes, I know RFC 1951 doesn't mention any header at the start of
++ * a deflated document, but zlib absolutely requires one. And since nearly
++ * all "deflate" implementations use zlib, we need to play along with this
++ * brain damage. */
++ put_byte(ZLIB_HEADER[0]);
++ put_byte(ZLIB_HEADER[1]);
++ }
+
+ if ( gz1->save_orig_name )
+ {
+ flags |= ORIG_NAME;
+ }
+
+- put_byte(flags);
+- put_long(gz1->time_stamp);
+-
+- gz1->crc = -1;
++ if (gz1->compression_format != DEFLATE_FORMAT)
++ {
++ put_byte(flags);
++ put_long(gz1->time_stamp);
+
+- updcrc( gz1, NULL, 0 );
++ gz1->crc = -1;
++ updcrc( gz1, NULL, 0 );
++ }
++ else
++ {
++ /* Deflate compression uses an Adler32 CRC, not a CRC32. */
++ gz1->adler = 1L;
++ }
+
+ gz1->state = GZS_ZIP2;
+
+@@ -9529,18 +9604,20 @@
+ bi_init( gz1, gz1->ofd );
+ ct_init( gz1, &attr, &gz1->method );
+ lm_init( gz1, gz1->level, &deflate_flags );
+- put_byte((uch)deflate_flags);
+-
+- put_byte(OS_CODE);
+
+- if ( gz1->save_orig_name )
++ if (gz1->compression_format != DEFLATE_FORMAT)
+ {
+- char *p = gz1_basename( gz1, gz1->ifname );
++ put_byte((uch)deflate_flags);
++ put_byte(OS_CODE);
++ if ( gz1->save_orig_name )
++ {
++ char *p = gz1_basename( gz1, gz1->ifname );
+
+- do {
+- put_char(*p);
++ do {
++ put_char(*p);
+
+- } while (*p++);
++ } while (*p++);
++ }
+ }
+
+ gz1->header_bytes = (long)gz1->outcnt;
+@@ -9674,10 +9751,25 @@
+ }
+ #endif
+
+- put_long( gz1->crc );
+- put_long( gz1->bytes_in );
+-
+- gz1->header_bytes += 2*sizeof(long);
++ if (gz1->compression_format != DEFLATE_FORMAT)
++ {
++ put_long( gz1->crc );
++ put_long( gz1->bytes_in );
++ gz1->header_bytes += 2*sizeof(long);
++ }
++ else
++ {
++ /* Append an Adler32 CRC to our deflated data.
++ * Yes, I know RFC 1951 doesn't mention any CRC at the end of a
++ * deflated document, but zlib absolutely requires one. And since nearly
++ * all "deflate" implementations use zlib, we need to play along with this
++ * brain damage. */
++ put_byte( (gz1->adler >> 24) );
++ put_byte( (gz1->adler >> 16) & 0xFF );
++ put_byte( (gz1->adler >> 8) & 0xFF );
++ put_byte( (gz1->adler ) & 0xFF );
++ gz1->header_bytes += 4*sizeof(uch);
++ }
+
+ flush_outbuf( gz1 );
+
+@@ -9685,6 +9777,67 @@
+
+ return OK;
+ }
++
++
++/* =========================================================================
++ adler32 -- compute the Adler-32 checksum of a data stream
++ Copyright (C) 1995-1998 Mark Adler
++
++ This software is provided 'as-is', without any express or implied
++ warranty. In no event will the authors be held liable for any damages
++ arising from the use of this software.
++
++ Permission is granted to anyone to use this software for any purpose,
++ including commercial applications, and to alter it and redistribute it
++ freely, subject to the following restrictions:
++
++ 1. The origin of this software must not be misrepresented; you must not
++ claim that you wrote the original software. If you use this software
++ in a product, an acknowledgment in the product documentation would be
++ appreciated but is not required.
++ 2. Altered source versions must be plainly marked as such, and must not be
++ misrepresented as being the original software.
++ 3. This notice may not be removed or altered from any source distribution.
++
++ Modified by Eric Kidd <eric.kidd@pobox.com> to play nicely with mod_gzip.
++ */
++
++#define BASE 65521L /* largest prime smaller than 65536 */
++#define NMAX 5552
++/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
++
++#define DO1(buf,i) {s1 += buf[i]; s2 += s1;}
++#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
++#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
++#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
++#define DO16(buf) DO8(buf,0); DO8(buf,8);
++
++ulg adler32(ulg adler, uch *buf, unsigned len)
++{
++ unsigned long s1 = adler & 0xffff;
++ unsigned long s2 = (adler >> 16) & 0xffff;
++ int k;
++
++ if (buf == NULL) return 1L;
++
++ while (len > 0) {
++ k = len < NMAX ? len : NMAX;
++ len -= k;
++ while (k >= 16) {
++ DO16(buf);
++ buf += 16;
++ k -= 16;
++ }
++ if (k != 0) do {
++ s1 += *buf++;
++ s2 += s1;
++ } while (--k);
++ s1 %= BASE;
++ s2 %= BASE;
++ }
++ return (s2 << 16) | s1;
++}
++
+
+ /* END OF FILE */
+