--- /dev/null
+libfile-chdir-perl
+dpkg-buildpackage: source package is libfile-chdir-perl
+dpkg-buildpackage: source version is 0.06-2.1
+dpkg-buildpackage: source changed by Stephen Gran <sgran@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 0.06-2.1
+dh_testdir
+dh_testroot
+# Add commands to clean up after the build process here
+[ ! -f Makefil ] || /scratchbox/tools/bin/make distclean
+dh_clean build-stamp install-stamp
+dpkg-source: building libfile-chdir-perl in libfile-chdir-perl_0.06-2.1.tar.gz
+dpkg-source: building libfile-chdir-perl in libfile-chdir-perl_0.06-2.1.dsc
+dh_testdir
+# Add commands to compile the package here
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Writing Makefile for File::chdir
+/scratchbox/tools/bin/make OPTIMIZE="-Wall -g -O2"
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06'
+Manifying blib/man3/File::chdir.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+#/scratchbox/tools/bin/make test
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl/usr/share/perl5/File/chdir.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl/usr/share/man/man3/File::chdir.0
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl/usr/share/man/man3/File::chdir.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06'
+# As this is a architecture independent package, we are not supposed to install
+# stuff to /usr/lib. MakeMaker creates the dirs, we delete them from the deb:
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-chdir-perl/libfile-chdir-perl-0.06/debian/libfile-chdir-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installdocs
+dh_installchangelogs Changes
+dh_perl
+dh_link
+dh_strip
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libfile-chdir-perl' in `../libfile-chdir-perl_0.06-2.1_all.deb'.
+
+dpkg-buildpackage: full upload; Debian-native package (full source is included)
+(Reading database ... 34713 files and directories currently installed.)
+Preparing to replace libfile-chdir-perl 0.06-2.1 (using libfile-chdir-perl_0.06-2.1_all.deb) ...
+Unpacking replacement libfile-chdir-perl ...
+Setting up libfile-chdir-perl (0.06-2.1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-==================-==============-============================================
+ii libfile-chdir-perl 0.06-2.1 A more sensible way to change directories
+libclass-accessor-perl
+dpkg-buildpackage: source package is libclass-accessor-perl
+dpkg-buildpackage: source version is 0.31-2
+dpkg-buildpackage: source changed by gregor herrmann <gregor+debian@comodo.priv.at>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 0.31-2
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
+Removing patch manpage_typo.diff
+Restoring lib/Class/Accessor.pm
+Restoring README
+
+No patches applied
+rm -rf .pc debian/stamp-patched
+dh_testdir
+dh_testroot
+[ ! -e Makefile ] || /scratchbox/tools/bin/make distclean
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
+rm -rf ./blib Makefile.aperl blib/arch/auto/Class/Accessor/extralibs.all blib/arch/auto/Class/Accessor/extralibs.ld perlmain.c tmon.out mon.out so_locations pm_to_blib *.o *.a perl.exe perl perl Accessor.bso Accessor.def libAccessor.def Accessor.exp Accessor.x core core.*perl.*.? *perl.core core.[0-9] core.[0-9][0-9] core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9][0-9]
+mv Makefile Makefile.old > /dev/null 2>&1
+rm -rf blib/lib/auto/Class/Accessor blib/arch/auto/Class/Accessor
+rm -rf Class-Accessor-0.31
+rm -f blib/lib/Class/Accessor.pm blib/lib/Class/Accessor/Fast.pm blib/lib/Class/Accessor/Faster.pm Makefile.old Makefile
+/scratchbox/tools/bin/perl.bin "-MExtUtils::Manifest=fullcheck" -e fullcheck
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
+dh_clean build-stamp configure-stamp
+dpkg-source: building libclass-accessor-perl using existing libclass-accessor-perl_0.31.orig.tar.gz
+dpkg-source: building libclass-accessor-perl in libclass-accessor-perl_0.31-2.diff.gz
+dpkg-source: building libclass-accessor-perl in libclass-accessor-perl_0.31-2.dsc
+# quilt exits with 2 as return when there was nothing to do.
+# That's not an error here (but it's usefull to break loops in crude scripts)
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
+Applying patch manpage_typo.diff
+patching file lib/Class/Accessor.pm
+patching file README
+
+Now at patch manpage_typo.diff
+touch debian/stamp-patched
+dh_testdir
+perl Makefile.PL verbose INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+ AUTHOR => q[Marty Pauley <marty+perl@kasei.com>]
+ INSTALLDIRS => q[vendor]
+ NAME => q[Class::Accessor]
+ PREREQ_PM => { base=>q[1.01] }
+ VERSION_FROM => q[lib/Class/Accessor.pm]
+Using PERL=/targets/FREMANTLE_ARMEL/usr/bin/perl
+Writing Makefile for Class::Accessor
+touch configure-stamp
+dh_testdir
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
+cp lib/Class/Accessor/Fast.pm blib/lib/Class/Accessor/Fast.pm
+cp lib/Class/Accessor/Faster.pm blib/lib/Class/Accessor/Faster.pm
+cp lib/Class/Accessor.pm blib/lib/Class/Accessor.pm
+Manifying blib/man3/Class::Accessor::Faster.3pm
+Manifying blib/man3/Class::Accessor::Fast.3pm
+Manifying blib/man3/Class::Accessor.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/accessors.......ok
+t/aliases.........ok
+t/bestpractice....ok
+t/croak...........ok
+t/getset..........ok
+All tests successful.
+Files=5, Tests=119, 3 wallclock secs ( 3.37 cusr + 0.14 csys = 3.51 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+dh_installdirs
+/scratchbox/tools/bin/make install PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/perl5/Class/Accessor.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/perl5/Class/Accessor/Fast.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/perl5/Class/Accessor/Faster.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/man/man3/Class::Accessor.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/man/man3/Class::Accessor::Faster.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr/share/man/man3/Class::Accessor::Fast.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31'
+# Remove any empty directories
+find /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-perl/libclass-accessor-perl-0.31/debian/libclass-accessor-perl/usr -type d -empty -print0 | xargs --null --no-run-if-empty rmdir -p --ignore-fail-on-non-empty
+dh_testdir
+dh_testroot
+dh_perl
+dh_installdocs README
+dh_installman
+dh_installchangelogs Changes
+dh_installexamples examples/*
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libclass-accessor-perl' in `../libclass-accessor-perl_0.31-2_all.deb'.
+
+dpkg-buildpackage: binary and diff upload (original source NOT included)
+(Reading database ... 34713 files and directories currently installed.)
+Preparing to replace libclass-accessor-perl 0.31-2 (using libclass-accessor-perl_0.31-2_all.deb) ...
+Unpacking replacement libclass-accessor-perl ...
+Setting up libclass-accessor-perl (0.31-2) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-======================-==============-============================================
+ii libclass-accessor-perl 0.31-2 Automated accessor generator
+libclass-accessor-chained-perl
+dpkg-buildpackage: source package is libclass-accessor-chained-perl
+dpkg-buildpackage: source version is 0.01.1~debian-2.1
+dpkg-buildpackage: source changed by Stephen Gran <sgran@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 0.01.1~debian-2.1
+dh_testdir
+dh_testroot
+# Add commands to clean up after the build process here
+[ ! -f Makefile ] || /scratchbox/tools/bin/make distclean
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
+rm -rf ./blib Makefile.aperl blib/arch/auto/Class/Accessor/Chained/extralibs.all blib/arch/auto/Class/Accessor/Chained/extralibs.ld perlmain.c tmon.out mon.out so_locations pm_to_blib *.o *.a perl.exe perl perl Chained.bso Chained.def libChained.def Chained.exp Chained.x core core.*perl.*.? *perl.core core.[0-9] core.[0-9][0-9] core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9][0-9]
+mv Makefile Makefile.old > /dev/null 2>&1
+rm -rf blib/lib/auto/Class/Accessor/Chained blib/arch/auto/Class/Accessor/Chained
+rm -rf Class-Accessor-Chained-0.01
+rm -f blib/lib/Class/Accessor/Chained.pm blib/lib/Class/Accessor/Chained/Fast.pm Makefile.old Makefile
+/scratchbox/tools/bin/perl.bin "-MExtUtils::Manifest=fullcheck" -e fullcheck
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
+dh_clean build-stamp install-stamp
+dpkg-source: building libclass-accessor-chained-perl using existing libclass-accessor-chained-perl_0.01.1~debian.orig.tar.gz
+dpkg-source: building libclass-accessor-chained-perl in libclass-accessor-chained-perl_0.01.1~debian-2.1.diff.gz
+dpkg-source: building libclass-accessor-chained-perl in libclass-accessor-chained-perl_0.01.1~debian-2.1.dsc
+dh_testdir
+# Add commands to compile the package here
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+Writing Makefile for Class::Accessor::Chained
+/scratchbox/tools/bin/make OPTIMIZE="-Wall -g -O2"
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
+cp lib/Class/Accessor/Chained/Fast.pm blib/lib/Class/Accessor/Chained/Fast.pm
+cp lib/Class/Accessor/Chained.pm blib/lib/Class/Accessor/Chained.pm
+Manifying blib/man3/Class::Accessor::Chained::Fast.3pm
+Manifying blib/man3/Class::Accessor::Chained.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+#/scratchbox/tools/bin/make test
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/share/perl5/Class/Accessor/Chained.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/share/perl5/Class/Accessor/Chained/Fast.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/share/man/man3/Class::Accessor::Chained.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/share/man/man3/Class::Accessor::Chained::Fast.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian'
+# As this is a architecture independent package, we are not supposed to install
+# stuff to /usr/lib. MakeMaker creates the dirs, we delete them from the deb:
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents /home/maemo/workspace/git/dh-make-perl/dev/arm/libclass-accessor-chained-perl/libclass-accessor-chained-perl-0.01.1~debian/debian/libclass-accessor-chained-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installdocs README
+dh_installchangelogs Changes
+dh_perl
+dh_link
+dh_strip
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libclass-accessor-chained-perl' in `../libclass-accessor-chained-perl_0.01.1~debian-2.1_all.deb'.
+
+dpkg-buildpackage: binary and diff upload (original source NOT included)
+(Reading database ... 34713 files and directories currently installed.)
+Preparing to replace libclass-accessor-chained-perl 0.01.1~debian-2.1 (using libclass-accessor-chained-perl_0.01.1~debian-2.1_all.deb) ...
+Unpacking replacement libclass-accessor-chained-perl ...
+Setting up libclass-accessor-chained-perl (0.01.1~debian-2.1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-==============================-=================-============================================
+ii libclass-accessor-chained-perl 0.01.1~debian-2.1 make chained accessors
+libmodule-depends-perl
+dpkg-buildpackage: source package is libmodule-depends-perl
+dpkg-buildpackage: source version is 0.14-1
+dpkg-buildpackage: source changed by James Bromberger <jeb@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 0.14-1
+dh_testdir
+dh_testroot
+# Add commands to clean up after the build process here
+/scratchbox/tools/bin/make distclean
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
+rm -rf ./blib Makefile.aperl blib/arch/auto/Module/Depends/extralibs.all blib/arch/auto/Module/Depends/extralibs.ld perlmain.c tmon.out mon.out so_locations pm_to_blib *.o *.a perl.exe perl perl Depends.bso Depends.def libDepends.def Depends.exp Depends.x core core.*perl.*.? *perl.core core.[0-9] core.[0-9][0-9] core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9][0-9]
+mv Makefile Makefile.old > /dev/null 2>&1
+rm -rf blib/lib/auto/Module/Depends blib/arch/auto/Module/Depends
+rm -rf Module-Depends-0.14
+rm -f blib/lib/Module/Depends/Intrusive.pm blib/lib/Module/Depends.pm Makefile.old Makefile
+/scratchbox/tools/bin/perl.bin "-MExtUtils::Manifest=fullcheck" -e fullcheck
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
+dh_clean build-stamp install-stamp
+dpkg-source: building libmodule-depends-perl using existing libmodule-depends-perl_0.14.orig.tar.gz
+dpkg-source: building libmodule-depends-perl in libmodule-depends-perl_0.14-1.diff.gz
+dpkg-source: building libmodule-depends-perl in libmodule-depends-perl_0.14-1.dsc
+dh_testdir
+# Add commands to compile the package here
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+Writing Makefile for Module::Depends
+/scratchbox/tools/bin/make OPTIMIZE="-Wall -g -O2"
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
+cp lib/Module/Depends.pm blib/lib/Module/Depends.pm
+cp lib/Module/Depends/Intrusive.pm blib/lib/Module/Depends/Intrusive.pm
+Manifying blib/man3/Module::Depends.3pm
+Manifying blib/man3/Module::Depends::Intrusive.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+#/scratchbox/tools/bin/make test
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl/usr/share/perl5/Module/Depends.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl/usr/share/perl5/Module/Depends/Intrusive.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl/usr/share/man/man3/Module::Depends::Intrusive.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl/usr/share/man/man3/Module::Depends.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14'
+# As this is a architecture independent package, we are not supposed to install
+# stuff to /usr/lib. MakeMaker creates the dirs, we delete them from the deb:
+#rmdir --ignore-fail-on-non-empty --parents /home/maemo/workspace/git/dh-make-perl/dev/arm/libmodule-depends-perl/libmodule-depends-perl-0.14/debian/libmodule-depends-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installdocs README
+dh_installchangelogs Changes
+dh_perl
+dh_link
+dh_strip
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libmodule-depends-perl' in `../libmodule-depends-perl_0.14-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+(Reading database ... 34713 files and directories currently installed.)
+Preparing to replace libmodule-depends-perl 0.14-1 (using libmodule-depends-perl_0.14-1_all.deb) ...
+Unpacking replacement libmodule-depends-perl ...
+Setting up libmodule-depends-perl (0.14-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-======================-==============-============================================
+ii libmodule-depends-perl 0.14-1 identify the dependencies of a distribution
+libpod-escapes-perl
+dpkg-buildpackage: source package is libpod-escapes-perl
+dpkg-buildpackage: source version is 1.04-1
+dpkg-buildpackage: source changed by Jay Bonci <jaybonci@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.04-1
+dh_testdir
+dh_testroot
+/scratchbox/tools/bin/make clean
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04'
+rm -rf ./blib Makefile.aperl blib/arch/auto/Pod/Escapes/extralibs.all blib/arch/auto/Pod/Escapes/extralibs.ld perlmain.c tmon.out mon.out so_locations pm_to_blib *.o *.a perl.exe perl perl Escapes.bso Escapes.def libEscapes.def Escapes.exp Escapes.x core core.*perl.*.? *perl.core core.[0-9] core.[0-9][0-9] core.[0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9] core.[0-9][0-9][0-9][0-9][0-9]
+mv Makefile Makefile.old > /dev/null 2>&1
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04'
+rm -f Makefile.old
+dh_clean
+dpkg-source: building libpod-escapes-perl using existing libpod-escapes-perl_1.04.orig.tar.gz
+dpkg-source: building libpod-escapes-perl in libpod-escapes-perl_1.04-1.diff.gz
+dpkg-source: building libpod-escapes-perl in libpod-escapes-perl_1.04-1.dsc
+dh_testdir
+# Add here commands to compile the package.
+perl Makefile.PL verbose INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+ INSTALLDIRS => q[vendor]
+ NAME => q[Pod::Escapes]
+ PREREQ_PM => { }
+ VERSION_FROM => q[lib/Pod/Escapes.pm]
+ dist => { COMPRESS=>q[gzip -6f], SUFFIX=>q[gz] }
+Using PERL=/targets/FREMANTLE_ARMEL/usr/bin/perl
+Writing Makefile for Pod::Escapes
+dh_testdir
+# Add here commands to compile the package.
+perl Makefile.PL verbose INSTALLDIRS=vendor
+ INSTALLDIRS => q[vendor]
+ NAME => q[Pod::Escapes]
+ PREREQ_PM => { }
+ VERSION_FROM => q[lib/Pod/Escapes.pm]
+ dist => { COMPRESS=>q[gzip -6f], SUFFIX=>q[gz] }
+Using PERL=/targets/FREMANTLE_ARMEL/usr/bin/perl
+Writing Makefile for Pod::Escapes
+dh_testdir
+dh_testroot
+dh_clean -k
+dh_installdirs
+/scratchbox/tools/bin/make PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04/debian/`pwd | sed -e "s/.*\/\\(.*\\)-.*/\\1/"`/usr OPTIMIZE="-O2 -g -Wall" test install
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04'
+cp lib/Pod/Escapes.pm blib/lib/Pod/Escapes.pm
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/01_about_verbose....ok
+t/10_main.............ok
+t/15_name2charnum.....ok
+All tests successful.
+Files=3, Tests=106, 1 wallclock secs ( 1.06 cusr + 0.05 csys = 1.11 CPU)
+Manifying blib/man3/Pod::Escapes.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04/debian/libpod-escapes-perl/usr/share/perl5/Pod/Escapes.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04/debian/libpod-escapes-perl/usr/share/man/man3/Pod::Escapes.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04'
+find /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-escapes-perl/libpod-escapes-perl-1.04/debian -type d | xargs rmdir -p --ignore-fail-on-non-empty
+dh_testdir
+dh_testroot
+dh_installdocs
+dh_installman
+dh_installchangelogs ChangeLog
+dh_link
+dh_strip
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_perl
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libpod-escapes-perl' in `../libpod-escapes-perl_1.04-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+(Reading database ... 34713 files and directories currently installed.)
+Preparing to replace libpod-escapes-perl 1.04-1 (using libpod-escapes-perl_1.04-1_all.deb) ...
+Unpacking replacement libpod-escapes-perl ...
+Setting up libpod-escapes-perl (1.04-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-===================-==============-=========================================================
+ii libpod-escapes-perl 1.04-1 CPAN's Pod::Escapes -- for resolving Pod E<...> sequences
+libpod-simple-perl
+dpkg-buildpackage: source package is libpod-simple-perl
+dpkg-buildpackage: source version is 3.07-1
+dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 3.07-1
+dh clean
+ dh_testdir
+ dh_auto_clean
+ dh_clean
+dpkg-source: building libpod-simple-perl in libpod-simple-perl_3.07-1.tar.gz
+dpkg-source: building libpod-simple-perl in libpod-simple-perl_3.07-1.dsc
+dh build
+ dh_testdir
+ dh_auto_configure
+Checking if your kit is complete...
+Looks good
+'CREATE_PACKLIST' is not a known MakeMaker parameter name.
+Writing Makefile for Pod::Simple
+ dh_auto_build
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
+cp lib/Pod/Simple/LinkSection.pm blib/lib/Pod/Simple/LinkSection.pm
+cp lib/Pod/Simple/DumpAsText.pm blib/lib/Pod/Simple/DumpAsText.pm
+cp lib/Pod/Simple/Progress.pm blib/lib/Pod/Simple/Progress.pm
+cp lib/Pod/Simple/XMLOutStream.pm blib/lib/Pod/Simple/XMLOutStream.pm
+cp lib/Pod/Simple/TextContent.pm blib/lib/Pod/Simple/TextContent.pm
+cp lib/Pod/Simple/Text.pm blib/lib/Pod/Simple/Text.pm
+cp lib/Pod/Simple/TranscodeSmart.pm blib/lib/Pod/Simple/TranscodeSmart.pm
+cp lib/Pod/Simple/Search.pm blib/lib/Pod/Simple/Search.pm
+cp lib/Pod/Simple/PullParserStartToken.pm blib/lib/Pod/Simple/PullParserStartToken.pm
+cp lib/Pod/Simple/Debug.pm blib/lib/Pod/Simple/Debug.pm
+cp lib/perlpodspec.pod blib/lib/perlpodspec.pod
+cp lib/Pod/Simple/Methody.pm blib/lib/Pod/Simple/Methody.pm
+cp lib/Pod/Simple/PullParserTextToken.pm blib/lib/Pod/Simple/PullParserTextToken.pm
+cp lib/Pod/Simple/PullParserEndToken.pm blib/lib/Pod/Simple/PullParserEndToken.pm
+cp lib/Pod/Simple.pm blib/lib/Pod/Simple.pm
+cp lib/Pod/Simple/HTMLBatch.pm blib/lib/Pod/Simple/HTMLBatch.pm
+cp lib/Pod/Simple/TranscodeDumb.pm blib/lib/Pod/Simple/TranscodeDumb.pm
+cp lib/Pod/Simple/RTF.pm blib/lib/Pod/Simple/RTF.pm
+cp lib/Pod/Simple/Checker.pm blib/lib/Pod/Simple/Checker.pm
+cp lib/Pod/Simple/PullParser.pm blib/lib/Pod/Simple/PullParser.pm
+cp lib/Pod/Simple/PullParserToken.pm blib/lib/Pod/Simple/PullParserToken.pm
+cp lib/Pod/Simple/SimpleTree.pm blib/lib/Pod/Simple/SimpleTree.pm
+cp lib/perlpod.pod blib/lib/perlpod.pod
+cp lib/Pod/Simple/TiedOutFH.pm blib/lib/Pod/Simple/TiedOutFH.pm
+cp lib/Pod/Simple/XHTML.pm blib/lib/Pod/Simple/XHTML.pm
+cp lib/Pod/Simple/HTML.pm blib/lib/Pod/Simple/HTML.pm
+cp lib/Pod/Simple.pod blib/lib/Pod/Simple.pod
+cp lib/Pod/Simple/Subclassing.pod blib/lib/Pod/Simple/Subclassing.pod
+cp lib/Pod/Simple/BlackBox.pm blib/lib/Pod/Simple/BlackBox.pm
+cp lib/Pod/Simple/DumpAsXML.pm blib/lib/Pod/Simple/DumpAsXML.pm
+cp lib/Pod/Simple/HTMLLegacy.pm blib/lib/Pod/Simple/HTMLLegacy.pm
+cp lib/Pod/Simple/Transcode.pm blib/lib/Pod/Simple/Transcode.pm
+Manifying blib/man3/Pod::Simple::DumpAsText.3pm
+Manifying blib/man3/Pod::Simple::LinkSection.3pm
+Manifying blib/man3/Pod::Simple::XMLOutStream.3pm
+Manifying blib/man3/Pod::Simple::TextContent.3pm
+Manifying blib/man3/Pod::Simple::Search.3pm
+Manifying blib/man3/Pod::Simple::Text.3pm
+Manifying blib/man3/Pod::Simple::Debug.3pm
+Manifying blib/man3/Pod::Simple::PullParserStartToken.3pm
+Manifying blib/man3/perlpodspec.3pm
+Manifying blib/man3/Pod::Simple::Methody.3pm
+Manifying blib/man3/Pod::Simple::PullParserEndToken.3pm
+Manifying blib/man3/Pod::Simple::PullParserTextToken.3pm
+Manifying blib/man3/Pod::Simple::HTMLBatch.3pm
+Manifying blib/man3/Pod::Simple::RTF.3pm
+Manifying blib/man3/Pod::Simple::Checker.3pm
+Manifying blib/man3/Pod::Simple::PullParser.3pm
+Manifying blib/man3/Pod::Simple::SimpleTree.3pm
+Manifying blib/man3/Pod::Simple::PullParserToken.3pm
+Manifying blib/man3/Pod::Simple::XHTML.3pm
+Manifying blib/man3/perlpod.3pm
+Manifying blib/man3/Pod::Simple::HTML.3pm
+Manifying blib/man3/Pod::Simple::Subclassing.3pm
+Manifying blib/man3/Pod::Simple.3pm
+Manifying blib/man3/Pod::Simple::DumpAsXML.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
+ dh_auto_test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/00about.....ok
+t/20_skip.....ok
+t/ac_d........ok
+t/accept01....ok
+t/accept05....ok
+t/basic.......ok
+t/begin.......ok
+t/cbacks......ok
+t/chunking....ok
+t/closeys.....ok
+t/corpus......ok
+t/encod01.....ok
+t/encod02.....ok
+t/encod03.....ok
+t/end_over....ok
+t/fcodes......ok
+t/fcodes_e....ok
+t/fcodes_l....ok
+t/fcodes_s....ok
+t/for.........ok
+t/fornot......ok
+t/fullstop....ok
+t/heads.......ok
+t/html01......ok
+t/html02......ok
+t/html03......ok
+t/htmlbat.....ok
+t/items.......ok
+t/items02.....ok
+t/itemstar....ok
+t/linkclas....ok
+t/puller......ok
+t/pulltitl....ok
+t/reinit......ok
+t/render......ok
+t/search05....ok
+t/search10....ok
+t/search12....ok
+t/search20....ok
+t/search22....ok
+t/search25....ok
+t/search26....ok
+t/search27....ok
+t/search28....ok
+t/search29....ok
+t/search50....ok
+ 3/8 skipped: various reasons
+t/stree.......ok
+t/tiedfh......ok
+t/verb_fmt....ok
+t/verbatim....ok
+t/x_nixer.....ok
+t/xhtml01.....ok
+ 1/26 skipped: HTML::Entities not installed
+t/xhtml05.....ok
+All tests successful, 4 subtests skipped.
+Files=53, Tests=1095, 71 wallclock secs (64.86 cusr + 1.96 csys = 66.82 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
+dh build
+dh install
+ dh_testroot
+ dh_prep
+ dh_installdirs
+ dh_auto_install
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/perlpod.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/perlpodspec.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/HTMLLegacy.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/DumpAsText.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/RTF.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Subclassing.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/TiedOutFH.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Methody.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/PullParserToken.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/XHTML.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/PullParserEndToken.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/XMLOutStream.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/TranscodeDumb.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/PullParserStartToken.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/BlackBox.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/PullParser.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/SimpleTree.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/DumpAsXML.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Transcode.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/HTML.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Checker.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/HTMLBatch.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/LinkSection.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/TextContent.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/TranscodeSmart.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Search.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Text.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Debug.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/Progress.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/perl5/Pod/Simple/PullParserTextToken.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::HTMLBatch.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::PullParserStartToken.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Debug.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::PullParserToken.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::RTF.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Text.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::PullParser.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::TextContent.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::DumpAsText.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Subclassing.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::HTML.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Checker.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Search.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::PullParserEndToken.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::XHTML.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::Methody.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::DumpAsXML.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::SimpleTree.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::PullParserTextToken.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::LinkSection.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/perlpod.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/perlpodspec.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07/debian/libpod-simple-perl/usr/share/man/man3/Pod::Simple::XMLOutStream.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpod-simple-perl/libpod-simple-perl-3.07'
+ dh_install
+ dh_installdocs
+ dh_installchangelogs
+ dh_installexamples
+ dh_installman
+ dh_installcatalogs
+ dh_installcron
+ dh_installdebconf
+ dh_installemacsen
+ dh_installifupdown
+ dh_installinfo
+ dh_installinit
+ dh_installmenu
+ dh_installmime
+ dh_installmodules
+ dh_installlogcheck
+ dh_installlogrotate
+ dh_installpam
+ dh_installppp
+ dh_installudev
+ dh_installwm
+ dh_installxfonts
+ dh_bugfiles
+ dh_lintian
+ dh_gconf
+ dh_icons
+ dh_perl
+ dh_usrlocal
+ dh_link
+ dh_compress
+ dh_fixperms
+rm -v debian/libpod-simple-perl/usr/share/perl5/perlpod*.pod \
+ debian/libpod-simple-perl/usr/share/man/man3/perlpod*.3pm.gz
+removed `debian/libpod-simple-perl/usr/share/perl5/perlpod.pod'
+removed `debian/libpod-simple-perl/usr/share/perl5/perlpodspec.pod'
+removed `debian/libpod-simple-perl/usr/share/man/man3/perlpod.3pm.gz'
+removed `debian/libpod-simple-perl/usr/share/man/man3/perlpodspec.3pm.gz'
+dh binary
+ dh_strip
+ dh_makeshlibs
+ dh_shlibdeps
+ dh_installdeb
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+dpkg-deb: building package `libpod-simple-perl' in `../libpod-simple-perl_3.07-1_all.deb'.
+
+dpkg-buildpackage: full upload; Debian-native package (full source is included)
+Selecting previously deselected package libpod-simple-perl.
+(Reading database ... 34713 files and directories currently installed.)
+Unpacking libpod-simple-perl (from libpod-simple-perl_3.07-1_all.deb) ...
+Setting up libpod-simple-perl (3.07-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-==================-==============-=======================================================
+ii libpod-simple-perl 3.07-1 Perl framework for parsing files in Pod markup language
+libio-stringy-perl
+libtest-simple-perl
+dpkg-buildpackage: source package is libtest-simple-perl
+dpkg-buildpackage: source version is 0.80-1
+dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 0.80-1
+dh clean
+ dh_testdir
+ dh_auto_clean
+ dh_clean
+dpkg-source: building libtest-simple-perl using existing libtest-simple-perl_0.80.orig.tar.gz
+dpkg-source: building libtest-simple-perl in libtest-simple-perl_0.80-1.diff.gz
+dpkg-source: building libtest-simple-perl in libtest-simple-perl_0.80-1.dsc
+dh build
+ dh_testdir
+ dh_auto_configure
+
+NOTE: There have been API changes between this version and any older
+than version 0.48! Please see the Changes file for details.
+
+
+NOTE: The behavior of Test::More and threads has changed between this
+version and any older than version 0.48! Please see the Changes file
+for details.
+
+Checking if your kit is complete...
+Looks good
+'CREATE_PACKLIST' is not a known MakeMaker parameter name.
+Writing Makefile for Test::Simple
+ dh_auto_build
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
+cp lib/Test/Builder/Tester/Color.pm blib/lib/Test/Builder/Tester/Color.pm
+cp lib/Test/Simple.pm blib/lib/Test/Simple.pm
+cp lib/Test/Builder.pm blib/lib/Test/Builder.pm
+cp lib/Test/More.pm blib/lib/Test/More.pm
+cp lib/Test/Builder/Tester.pm blib/lib/Test/Builder/Tester.pm
+cp lib/Test/Builder/Module.pm blib/lib/Test/Builder/Module.pm
+cp lib/Test/Tutorial.pod blib/lib/Test/Tutorial.pod
+Manifying blib/man3/Test::Builder::Tester::Color.3pm
+Manifying blib/man3/Test::Builder.3pm
+Manifying blib/man3/Test::Simple.3pm
+Manifying blib/man3/Test::More.3pm
+Manifying blib/man3/Test::Builder::Module.3pm
+Manifying blib/man3/Test::Builder::Tester.3pm
+Manifying blib/man3/Test::Tutorial.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
+ dh_auto_test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/00test_harness_check..........ok
+t/bad_plan......................ok
+t/bail_out......................ok
+t/BEGIN_require_ok..............ok
+t/BEGIN_use_ok..................ok
+t/buffer........................ok
+t/Builder.......................ok
+t/carp..........................ok
+t/circular_data.................ok
+t/cmp_ok........................ok
+t/create........................ok
+t/curr_test.....................ok
+t/details.......................ok
+t/diag..........................ok
+t/dont_overwrite_die_handler....ok
+t/eq_set........................ok
+t/exit..........................ok
+t/extra.........................ok
+t/extra_one.....................ok
+t/fail-like.....................ok
+t/fail-more.....................ok
+t/fail..........................ok
+t/fail_one......................ok
+t/filehandles...................ok
+t/fork..........................ok
+t/harness_active................ok
+t/has_plan......................ok
+t/has_plan2.....................ok
+t/import........................ok
+t/is_deeply_dne_bug.............ok
+t/is_deeply_fail................ok
+t/is_deeply_with_threads........skipped
+ all skipped: many perls have broken threads. Enable with AUTHOR_TESTING.
+t/is_fh.........................ok
+t/maybe_regex...................ok
+ 3/16 skipped: blessed regex checker added in 5.10
+t/missing.......................ok
+t/More..........................ok
+t/no_diag.......................ok
+t/no_ending.....................ok
+t/no_header.....................ok
+t/no_plan.......................ok
+t/ok_obj........................ok
+t/output........................ok
+t/overload......................ok
+t/overload_threads..............ok
+ 1/5 skipped: not really skipped, testing overloaded reason
+t/plan..........................ok
+t/plan_bad......................ok
+t/plan_is_noplan................ok
+t/plan_no_plan..................ok
+ 1/6 skipped: Just testing skip with no_plan
+t/plan_shouldnt_import..........ok
+t/plan_skip_all.................skipped
+ all skipped: Just testing plan & skip_all
+t/pod-coverage..................skipped
+ all skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
+t/pod...........................skipped
+ all skipped: Test::Pod 1.00 required for testing POD
+t/require_ok....................ok
+t/reset.........................ok
+t/simple........................ok
+t/skip..........................ok
+ 8/17 skipped: various reasons
+t/skipall.......................ok
+t/tbm_doesnt_set_exported_to....ok
+t/tbt_01basic...................ok
+t/tbt_02fhrestore...............ok
+t/tbt_03die.....................ok
+t/tbt_04line_num................ok
+t/tbt_05faildiag................ok
+t/tbt_06errormess...............ok
+t/tbt_07args....................ok
+t/thread_taint..................ok
+t/threads.......................ok
+t/todo..........................ok
+t/try...........................ok
+t/undef.........................ok
+t/use_ok........................ok
+t/useing........................ok
+t/utf8..........................skipped
+ all skipped: Not yet implemented
+All tests successful, 5 tests and 13 subtests skipped.
+Files=73, Tests=521, 47 wallclock secs (41.52 cusr + 2.24 csys = 43.76 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
+dh binary
+ dh_testroot
+ dh_prep
+ dh_installdirs
+ dh_auto_install
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Simple.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/More.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Tutorial.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Builder.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Builder/Tester.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Builder/Module.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/perl5/Test/Builder/Tester/Color.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Tutorial.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Builder::Tester::Color.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Builder.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Builder::Module.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Simple.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::More.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80/debian/libtest-simple-perl/usr/share/man/man3/Test::Builder::Tester.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-simple-perl/libtest-simple-perl-0.80'
+ dh_install
+ dh_installdocs
+ dh_installchangelogs
+ dh_installexamples
+ dh_installman
+ dh_installcatalogs
+ dh_installcron
+ dh_installdebconf
+ dh_installemacsen
+ dh_installifupdown
+ dh_installinfo
+ dh_installinit
+ dh_installmenu
+ dh_installmime
+ dh_installmodules
+ dh_installlogcheck
+ dh_installlogrotate
+ dh_installpam
+ dh_installppp
+ dh_installudev
+ dh_installwm
+ dh_installxfonts
+ dh_bugfiles
+ dh_lintian
+ dh_gconf
+ dh_icons
+ dh_perl
+ dh_usrlocal
+ dh_link
+ dh_compress
+ dh_fixperms
+ dh_strip
+ dh_makeshlibs
+ dh_shlibdeps
+ dh_installdeb
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+dpkg-deb: building package `libtest-simple-perl' in `../libtest-simple-perl_0.80-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libtest-simple-perl.
+(Reading database ... 34806 files and directories currently installed.)
+Unpacking libtest-simple-perl (from libtest-simple-perl_0.80-1_all.deb) ...
+Setting up libtest-simple-perl (0.80-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-===================-==============-============================================
+ii libtest-simple-perl 0.80-1 Basic utilities for writing tests in Perl
+libtest-pod-perl
+dpkg-buildpackage: source package is libtest-pod-perl
+dpkg-buildpackage: source version is 1.26-2
+dpkg-buildpackage: source changed by gregor herrmann <gregor+debian@comodo.priv.at>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.26-2
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+[ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
+dpkg-source: building libtest-pod-perl using existing libtest-pod-perl_1.26.orig.tar.gz
+dpkg-source: building libtest-pod-perl in libtest-pod-perl_1.26-2.diff.gz
+dpkg-source: building libtest-pod-perl in libtest-pod-perl_1.26-2.dsc
+dh_testdir
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+Writing Makefile for Test::Pod
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
+cp Pod.pm blib/lib/Test/Pod.pm
+Manifying blib/man3/Test::Pod.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/00-load..............ok
+t/all_pod_files........ok
+t/cut-outside-block....ok
+t/good.................ok
+t/item-ordering........ok
+t/load.................ok
+t/missing-file.........ok
+t/pod..................ok
+t/selftest.............ok
+t/spaced-directives....skipped
+ all skipped: Not written yet
+t/unknown-directive....ok
+All tests successful, 1 test skipped.
+Files=11, Tests=19, 11 wallclock secs (10.33 cusr + 0.40 csys = 10.73 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26/debian/libtest-pod-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26/debian/libtest-pod-perl/usr/share/perl5/Test/Pod.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26/debian/libtest-pod-perl/usr/share/man/man3/Test::Pod.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26'
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26/debian/libtest-pod-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents --verbose /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-perl/libtest-pod-perl-1.26/debian/libtest-pod-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installdocs
+dh_installchangelogs Changes
+dh_perl
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libtest-pod-perl' in `../libtest-pod-perl_1.26-2_all.deb'.
+
+dpkg-buildpackage: binary and diff upload (original source NOT included)
+Selecting previously deselected package libtest-pod-perl.
+(Reading database ... 34827 files and directories currently installed.)
+Unpacking libtest-pod-perl (from libtest-pod-perl_1.26-2_all.deb) ...
+Setting up libtest-pod-perl (1.26-2) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-================-==============-============================================
+ii libtest-pod-perl 1.26-2 Test::Pod - check for POD errors in files
+libextutils-cbuilder-perl
+dpkg-buildpackage: source package is libextutils-cbuilder-perl
+dpkg-buildpackage: source version is 0.23-1
+dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 0.23-1
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
+Removing patch 10_fix-gnukfreebsd-hurd.patch
+Restoring lib/ExtUtils/CBuilder.pm
+
+No patches applied
+rm -rf .pc debian/stamp-patched
+dh clean
+ dh_testdir
+ dh_auto_clean
+ dh_clean
+dpkg-source: building libextutils-cbuilder-perl using existing libextutils-cbuilder-perl_0.23.orig.tar.gz
+dpkg-source: building libextutils-cbuilder-perl in libextutils-cbuilder-perl_0.23-1.diff.gz
+dpkg-source: building libextutils-cbuilder-perl in libextutils-cbuilder-perl_0.23-1.dsc
+# quilt exits with 2 as return when there was nothing to do.
+# That's not an error here (but it's usefull to break loops in crude scripts)
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
+Applying patch 10_fix-gnukfreebsd-hurd.patch
+patching file lib/ExtUtils/CBuilder.pm
+
+Now at patch 10_fix-gnukfreebsd-hurd.patch
+touch debian/stamp-patched
+dh build
+ dh_testdir
+ dh_auto_configure
+Checking if your kit is complete...
+Looks good
+'CREATE_PACKLIST' is not a known MakeMaker parameter name.
+Writing Makefile for ExtUtils::CBuilder
+ dh_auto_build
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
+cp lib/ExtUtils/CBuilder.pm blib/lib/ExtUtils/CBuilder.pm
+cp lib/ExtUtils/CBuilder/Platform/Windows.pm blib/lib/ExtUtils/CBuilder/Platform/Windows.pm
+cp lib/ExtUtils/CBuilder/Platform/aix.pm blib/lib/ExtUtils/CBuilder/Platform/aix.pm
+cp bleadcheck.pl blib/lib/ExtUtils/bleadcheck.pl
+cp lib/ExtUtils/CBuilder/Platform/cygwin.pm blib/lib/ExtUtils/CBuilder/Platform/cygwin.pm
+cp lib/ExtUtils/CBuilder/Platform/VMS.pm blib/lib/ExtUtils/CBuilder/Platform/VMS.pm
+cp lib/ExtUtils/CBuilder/Platform/Unix.pm blib/lib/ExtUtils/CBuilder/Platform/Unix.pm
+cp lib/ExtUtils/CBuilder/Platform/darwin.pm blib/lib/ExtUtils/CBuilder/Platform/darwin.pm
+cp lib/ExtUtils/CBuilder/Platform/dec_osf.pm blib/lib/ExtUtils/CBuilder/Platform/dec_osf.pm
+cp lib/ExtUtils/CBuilder/Platform/os2.pm blib/lib/ExtUtils/CBuilder/Platform/os2.pm
+cp lib/ExtUtils/CBuilder/Base.pm blib/lib/ExtUtils/CBuilder/Base.pm
+Manifying blib/man3/ExtUtils::CBuilder::Platform::Windows.3pm
+Manifying blib/man3/ExtUtils::CBuilder.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
+ dh_auto_test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/01-basic....ok
+t/02-link.....ok
+All tests successful.
+Files=2, Tests=16, 4 wallclock secs ( 2.49 cusr + 0.34 csys = 2.83 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
+dh binary
+ dh_testroot
+ dh_prep
+ dh_installdirs
+ dh_auto_install
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/bleadcheck.pl
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Base.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/Unix.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/VMS.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/cygwin.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/aix.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/darwin.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/dec_osf.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/Windows.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/perl5/ExtUtils/CBuilder/Platform/os2.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/man/man3/ExtUtils::CBuilder::Platform::Windows.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23/debian/libextutils-cbuilder-perl/usr/share/man/man3/ExtUtils::CBuilder.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libextutils-cbuilder-perl/libextutils-cbuilder-perl-0.23'
+ dh_install
+ dh_installdocs
+ dh_installchangelogs
+ dh_installexamples
+ dh_installman
+ dh_installcatalogs
+ dh_installcron
+ dh_installdebconf
+ dh_installemacsen
+ dh_installifupdown
+ dh_installinfo
+ dh_installinit
+ dh_installmenu
+ dh_installmime
+ dh_installmodules
+ dh_installlogcheck
+ dh_installlogrotate
+ dh_installpam
+ dh_installppp
+ dh_installudev
+ dh_installwm
+ dh_installxfonts
+ dh_bugfiles
+ dh_lintian
+ dh_gconf
+ dh_icons
+ dh_perl
+ dh_usrlocal
+ dh_link
+ dh_compress
+ dh_fixperms
+ dh_strip
+ dh_makeshlibs
+ dh_shlibdeps
+ dh_installdeb
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+dpkg-deb: building package `libextutils-cbuilder-perl' in `../libextutils-cbuilder-perl_0.23-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+(Reading database ... 34833 files and directories currently installed.)
+Preparing to replace libextutils-cbuilder-perl 0.18-1maemo1 (using libextutils-cbuilder-perl_0.23-1_all.deb) ...
+Unpacking replacement libextutils-cbuilder-perl ...
+Setting up libextutils-cbuilder-perl (0.23-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-=========================-==============-============================================
+ii libextutils-cbuilder-perl 0.23-1 Compile and link C code for Perl modules
+libextutils-parsexs-perl
+dpkg-buildpackage: source package is libextutils-parsexs-perl
+dpkg-buildpackage: source version is 2.19-1
+dpkg-buildpackage: source changed by AGOSTINI Yves <agostini@univ-metz.fr>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 2.19-1
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+[ ! -f Build ] || /usr/bin/perl Build --allow_mb_mismatch 1 distclean
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-========================-==============-============================================
+ii libextutils-parsexs-perl 2.15-2maemo1 convert Perl XS code into C code
+libdevel-symdump-perl
+dpkg-buildpackage: source package is libdevel-symdump-perl
+dpkg-buildpackage: source version is 2.08-1
+dpkg-buildpackage: source changed by Colin Watson <cjwatson@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 2.08-1
+dh_testdir
+dh_testroot
+[ ! -f Makefile ] || /scratchbox/tools/bin/make distclean
+rm -f Makefile.old
+dh_clean build-stamp install-stamp
+dpkg-source: building libdevel-symdump-perl using existing libdevel-symdump-perl_2.08.orig.tar.gz
+dpkg-source: building libdevel-symdump-perl in libdevel-symdump-perl_2.08-1.diff.gz
+dpkg-source: building libdevel-symdump-perl in libdevel-symdump-perl_2.08-1.dsc
+dh_testdir
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+Writing Makefile for Devel::Symdump
+/scratchbox/tools/bin/make OPTIMIZE="-O2 -g -Wall"
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08'
+cp lib/Devel/Symdump.pm blib/lib/Devel/Symdump.pm
+cp lib/Devel/Symdump/Export.pm blib/lib/Devel/Symdump/Export.pm
+Manifying blib/man3/Devel::Symdump.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+dh_installdirs
+/scratchbox/tools/bin/make install PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr/share/perl5/Devel/Symdump.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr/share/perl5/Devel/Symdump/Export.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr/share/man/man3/Devel::Symdump.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08'
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents /home/maemo/workspace/git/dh-make-perl/dev/arm/libdevel-symdump-perl/libdevel-symdump-perl-2.08/debian/libdevel-symdump-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installdocs
+dh_installchangelogs ChangeLog
+dh_strip
+dh_compress
+dh_fixperms
+dh_perl
+dh_installdeb
+dh_shlibdeps
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libdevel-symdump-perl' in `../libdevel-symdump-perl_2.08-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libdevel-symdump-perl.
+(Reading database ... 34835 files and directories currently installed.)
+Unpacking libdevel-symdump-perl (from libdevel-symdump-perl_2.08-1_all.deb) ...
+Setting up libdevel-symdump-perl (2.08-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-=====================-==============-==============================================
+ii libdevel-symdump-perl 2.08-1 Perl module for inspecting perl's symbol table
+libpod-coverage-perl
+dpkg-buildpackage: source package is libpod-coverage-perl
+dpkg-buildpackage: source version is 0.19-1
+dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 0.19-1
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+[ ! -f Build ] || /usr/bin/perl Build distclean
+libtest-pod-coverage-perl
+dpkg-buildpackage: source package is libtest-pod-coverage-perl
+dpkg-buildpackage: source version is 1.08-3
+dpkg-buildpackage: source changed by gregor herrmann <gregor+debian@comodo.priv.at>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.08-3
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+# Add commands to clean up after the build process here
+[ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
+dpkg-source: building libtest-pod-coverage-perl using existing libtest-pod-coverage-perl_1.08.orig.tar.gz
+dpkg-source: building libtest-pod-coverage-perl in libtest-pod-coverage-perl_1.08-3.diff.gz
+dpkg-source: building libtest-pod-coverage-perl in libtest-pod-coverage-perl_1.08-3.dsc
+dh_testdir
+# Add commands to compile the package here
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+Writing Makefile for Test::Pod::Coverage
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
+cp Coverage.pm blib/lib/Test/Pod/Coverage.pm
+Manifying blib/man3/Test::Pod::Coverage.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/00.load................ok
+t/all_modules............ok
+t/all_pod_coverage_ok....ok
+t/alt_class..............ok
+t/nopod..................ok
+t/nosymbols..............ok
+t/parms..................ok
+t/pod....................ok
+t/privates...............ok
+t/self...................ok
+t/simple.................ok
+All tests successful.
+Files=11, Tests=23, 14 wallclock secs (12.60 cusr + 0.39 csys = 12.99 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+# Add commands to install the package into /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl here
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl/usr/share/perl5/Test/Pod/Coverage.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl/usr/share/man/man3/Test::Pod::Coverage.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08'
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents --verbose /home/maemo/workspace/git/dh-make-perl/dev/arm/libtest-pod-coverage-perl/libtest-pod-coverage-perl-1.08/debian/libtest-pod-coverage-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installdocs
+dh_installchangelogs Changes
+dh_perl
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libtest-pod-coverage-perl' in `../libtest-pod-coverage-perl_1.08-3_all.deb'.
+
+dpkg-buildpackage: binary and diff upload (original source NOT included)
+Selecting previously deselected package libtest-pod-coverage-perl.
+(Reading database ... 34862 files and directories currently installed.)
+Unpacking libtest-pod-coverage-perl (from libtest-pod-coverage-perl_1.08-3_all.deb) ...
+Setting up libtest-pod-coverage-perl (1.08-3) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-=========================-==============-============================================
+ii libtest-pod-coverage-perl 1.08-3 Check for pod coverage in your distribution
+libpar-dist-perl
+dpkg-buildpackage: source package is libpar-dist-perl
+dpkg-buildpackage: source version is 0.31-1
+dpkg-buildpackage: source changed by gregor herrmann <gregoa@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 0.31-1
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+[ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
+dpkg-source: building libpar-dist-perl using existing libpar-dist-perl_0.31.orig.tar.gz
+dpkg-source: building libpar-dist-perl in libpar-dist-perl_0.31-1.diff.gz
+dpkg-source: building libpar-dist-perl in libpar-dist-perl_0.31-1.dsc
+dh_testdir
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+Writing Makefile for PAR::Dist
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
+cp lib/PAR/Dist.pm blib/lib/PAR/Dist.pm
+Manifying blib/man3/PAR::Dist.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
+PERL_TEST_POD=1 /scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/00pod..............ok
+t/00podcover.........ok
+t/01basic............ok
+t/02parsedistname....ok
+All tests successful.
+Files=4, Tests=9, 3 wallclock secs ( 3.76 cusr + 0.10 csys = 3.86 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31/debian/libpar-dist-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31/debian/libpar-dist-perl/usr/share/perl5/PAR/Dist.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31/debian/libpar-dist-perl/usr/share/man/man3/PAR::Dist.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31'
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31/debian/libpar-dist-perl/usr/lib/perl5 ] || \
+ rmdir --ignore-fail-on-non-empty --parents --verbose \
+ /home/maemo/workspace/git/dh-make-perl/dev/arm/libpar-dist-perl/libpar-dist-perl-0.31/debian/libpar-dist-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installdocs
+dh_installchangelogs Changes
+dh_perl
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libpar-dist-perl' in `../libpar-dist-perl_0.31-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libpar-dist-perl.
+(Reading database ... 34869 files and directories currently installed.)
+Unpacking libpar-dist-perl (from libpar-dist-perl_0.31-1_all.deb) ...
+Setting up libpar-dist-perl (0.31-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-================-==============-======================================================
+ii libpar-dist-perl 0.31-1 perl module to create and manipulate PAR distributions
+libio-compress-base-perl
+dpkg-buildpackage: source package is libio-compress-base-perl
+dpkg-buildpackage: source version is 2.012-1
+dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 2.012-1
+dh clean
+ dh_testdir
+ dh_auto_clean
+ dh_clean
+dpkg-source: building libio-compress-base-perl using existing libio-compress-base-perl_2.012.orig.tar.gz
+dpkg-source: building libio-compress-base-perl in libio-compress-base-perl_2.012-1.diff.gz
+dpkg-source: building libio-compress-base-perl in libio-compress-base-perl_2.012-1.dsc
+dh build --before auto_configure
+ dh_testdir
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor INST_LIB='blib/lib'
+Checking if your kit is complete...
+Looks good
+Writing Makefile for IO::Compress::Base
+dh build --after auto_configure
+ dh_auto_build
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
+cp lib/IO/Uncompress/AnyUncompress.pm blib/lib/IO/Uncompress/AnyUncompress.pm
+cp lib/IO/Uncompress/Base.pm blib/lib/IO/Uncompress/Base.pm
+cp lib/File/GlobMapper.pm blib/lib/File/GlobMapper.pm
+cp lib/IO/Compress/Base.pm blib/lib/IO/Compress/Base.pm
+cp lib/IO/Compress/Base/Common.pm blib/lib/IO/Compress/Base/Common.pm
+Manifying blib/man3/IO::Uncompress::Base.3pm
+Manifying blib/man3/IO::Uncompress::AnyUncompress.3pm
+Manifying blib/man3/IO::Compress::Base.3pm
+Manifying blib/man3/File::GlobMapper.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
+ dh_auto_test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/000prereq.....ok
+t/01misc........ok
+ 1/78 skipped: readonly + threads
+t/99pod.........ok
+t/globmapper....ok
+All tests successful, 1 subtest skipped.
+Files=4, Tests=152, 6 wallclock secs ( 5.49 cusr + 0.16 csys = 5.65 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
+touch build-stamp
+dh install --before auto_install
+ dh_testroot
+ dh_prep
+ dh_installdirs
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/perl5/File/GlobMapper.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/perl5/IO/Uncompress/AnyUncompress.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/perl5/IO/Uncompress/Base.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/perl5/IO/Compress/Base.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/perl5/IO/Compress/Base/Common.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/man/man3/IO::Uncompress::AnyUncompress.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/man/man3/IO::Compress::Base.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/man/man3/IO::Uncompress::Base.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/man/man3/File::GlobMapper.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012'
+pod2man --section 3pm --name "IO::Compress::Base::FAQ" pod/FAQ.pod \
+ > /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-base-perl/libio-compress-base-perl-2.012/debian/libio-compress-base-perl/usr/share/man/man3/IO::Compress::Base::FAQ.3pm
+dh install --after auto_install
+ dh_install
+ dh_installdocs
+ dh_installchangelogs
+ dh_installexamples
+ dh_installman
+ dh_installcatalogs
+ dh_installcron
+ dh_installdebconf
+ dh_installemacsen
+ dh_installifupdown
+ dh_installinfo
+ dh_installinit
+ dh_installmenu
+ dh_installmime
+ dh_installmodules
+ dh_installlogcheck
+ dh_installlogrotate
+ dh_installpam
+ dh_installppp
+ dh_installudev
+ dh_installwm
+ dh_installxfonts
+ dh_bugfiles
+ dh_lintian
+ dh_gconf
+ dh_icons
+ dh_perl
+ dh_usrlocal
+ dh_link
+ dh_compress
+ dh_fixperms
+touch install-stamp
+dh binary-indep
+ dh_installdeb -i
+ dh_gencontrol -i
+ dh_md5sums -i
+ dh_builddeb -i
+dpkg-deb: building package `libio-compress-base-perl' in `../libio-compress-base-perl_2.012-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libio-compress-base-perl.
+(Reading database ... 34876 files and directories currently installed.)
+Unpacking libio-compress-base-perl (from libio-compress-base-perl_2.012-1_all.deb) ...
+Setting up libio-compress-base-perl (2.012-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-========================-==============-============================================
+ii libio-compress-base-perl 2.012-1 Base Class for IO::Compress modules
+libcompress-raw-zlib-perl
+dpkg-buildpackage: source package is libcompress-raw-zlib-perl
+dpkg-buildpackage: source version is 2.012-1lenny1
+dpkg-buildpackage: source changed by Niko Tyni <ntyni@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 2.012-1lenny1
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
+Removing patch use-debian-zlib.patch
+Restoring config.in
+
+Removing patch CVE-2009-1391
+Restoring Zlib.xs
+
+No patches applied
+rm -rf .pc debian/stamp-patched
+dh clean
+ dh_testdir
+ dh_auto_clean
+ dh_clean
+dpkg-source: building libcompress-raw-zlib-perl using existing libcompress-raw-zlib-perl_2.012.orig.tar.gz
+dpkg-source: building libcompress-raw-zlib-perl in libcompress-raw-zlib-perl_2.012-1lenny1.diff.gz
+dpkg-source: building libcompress-raw-zlib-perl in libcompress-raw-zlib-perl_2.012-1lenny1.dsc
+# quilt exits with 2 as return when there was nothing to do.
+# That's not an error here (but it's usefull to break loops in crude scripts)
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
+Applying patch CVE-2009-1391
+patching file Zlib.xs
+
+Applying patch use-debian-zlib.patch
+patching file config.in
+
+Now at patch use-debian-zlib.patch
+touch debian/stamp-patched
+dh build
+ dh_testdir
+ dh_auto_configure
+Parsing config.in...
+Auto Detect Gzip OS Code..
+Setting Gzip OS Code to 3 [Unix/Default]
+Looks Good.
+Checking if your kit is complete...
+Looks good
+'CREATE_PACKLIST' is not a known MakeMaker parameter name.
+Writing Makefile for Compress::Raw::Zlib
+ dh_auto_build
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
+cp lib/Compress/Raw/Zlib.pm blib/lib/Compress/Raw/Zlib.pm
+AutoSplitting blib/lib/Compress/Raw/Zlib.pm (blib/lib/auto/Compress/Raw/Zlib)
+/targets/FREMANTLE_ARMEL/usr/bin/perl /usr/share/perl5/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap Zlib.xs > Zlib.xsc && mv Zlib.xsc Zlib.c
+cc -c -I/usr/inclide -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -DVERSION=\"2.012\" -DXS_VERSION=\"2.012\" -fPIC "-I/usr/lib/perl/5.8/CORE" -DGZIP_OS_CODE=3 -DUSE_PPPORT_H Zlib.c
+Running Mkbootstrap for Compress::Raw::Zlib ()
+chmod 644 Zlib.bs
+rm -f blib/arch/auto/Compress/Raw/Zlib/Zlib.so
+LD_RUN_PATH="" cc -shared -L/usr/local/lib Zlib.o -o blib/arch/auto/Compress/Raw/Zlib/Zlib.so -L/usr/lib -lz
+chmod 755 blib/arch/auto/Compress/Raw/Zlib/Zlib.so
+cp Zlib.bs blib/arch/auto/Compress/Raw/Zlib/Zlib.bs
+chmod 644 blib/arch/auto/Compress/Raw/Zlib/Zlib.bs
+Manifying blib/man3/Compress::Raw::Zlib.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
+ dh_auto_test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/000prereq....ok
+t/01version....ok
+t/02zlib.......ok
+t/07bufsize....ok
+t/18lvalue.....ok
+t/99pod........ok
+All tests successful.
+Files=6, Tests=585, 42 wallclock secs (40.75 cusr + 0.31 csys = 41.06 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
+touch build-stamp
+dh binary-arch
+ dh_testroot -a
+ dh_prep -a
+ dh_installdirs -a
+ dh_auto_install -a
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012/debian/libcompress-raw-zlib-perl/usr/lib/perl5/auto/Compress/Raw/Zlib/Zlib.so
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012/debian/libcompress-raw-zlib-perl/usr/lib/perl5/auto/Compress/Raw/Zlib/Zlib.bs
+Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012/debian/libcompress-raw-zlib-perl/usr/lib/perl5/Compress/Raw/Zlib.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012/debian/libcompress-raw-zlib-perl/usr/lib/perl5/auto/Compress/Raw/Zlib/autosplit.ix
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012/debian/libcompress-raw-zlib-perl/usr/share/man/man3/Compress::Raw::Zlib.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libcompress-raw-zlib-perl/libcompress-raw-zlib-perl-2.012'
+ dh_install -a
+ dh_installdocs -a
+ dh_installchangelogs -a
+ dh_installexamples -a
+ dh_installman -a
+ dh_installcatalogs -a
+ dh_installcron -a
+ dh_installdebconf -a
+ dh_installemacsen -a
+ dh_installifupdown -a
+ dh_installinfo -a
+ dh_installinit -a
+ dh_installmenu -a
+ dh_installmime -a
+ dh_installmodules -a
+ dh_installlogcheck -a
+ dh_installlogrotate -a
+ dh_installpam -a
+ dh_installppp -a
+ dh_installudev -a
+ dh_installwm -a
+ dh_installxfonts -a
+ dh_bugfiles -a
+ dh_lintian -a
+ dh_gconf -a
+ dh_icons -a
+ dh_perl -a
+ dh_usrlocal -a
+ dh_link -a
+ dh_compress -a
+ dh_fixperms -a
+ dh_strip -a
+ dh_makeshlibs -a
+ dh_shlibdeps -a
+ dh_installdeb -a
+ dh_gencontrol -a
+ dh_md5sums -a
+ dh_builddeb -a
+dpkg-deb: building package `libcompress-raw-zlib-perl' in `../libcompress-raw-zlib-perl_2.012-1lenny1_armel.deb'.
+
+dpkg-buildpackage: binary and diff upload (original source NOT included)
+Selecting previously deselected package libcompress-raw-zlib-perl.
+(Reading database ... 34893 files and directories currently installed.)
+Unpacking libcompress-raw-zlib-perl (from libcompress-raw-zlib-perl_2.012-1lenny1_armel.deb) ...
+Setting up libcompress-raw-zlib-perl (2.012-1lenny1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-=========================-==============-===============================================
+ii libcompress-raw-zlib-perl 2.012-1lenny1 low-level interface to zlib compression library
+libio-compress-zlib-perl
+dpkg-buildpackage: source package is libio-compress-zlib-perl
+dpkg-buildpackage: source version is 2.012-1
+dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 2.012-1
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+[ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
+dpkg-source: building libio-compress-zlib-perl using existing libio-compress-zlib-perl_2.012.orig.tar.gz
+dpkg-source: building libio-compress-zlib-perl in libio-compress-zlib-perl_2.012-1.diff.gz
+dpkg-source: building libio-compress-zlib-perl in libio-compress-zlib-perl_2.012-1.dsc
+dh_testdir
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor INST_LIB='blib/lib'
+Checking if your kit is complete...
+Looks good
+Writing Makefile for IO::Compress::Zlib
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
+cp lib/IO/Uncompress/RawInflate.pm blib/lib/IO/Uncompress/RawInflate.pm
+cp lib/IO/Compress/Adapter/Identity.pm blib/lib/IO/Compress/Adapter/Identity.pm
+cp lib/IO/Uncompress/Unzip.pm blib/lib/IO/Uncompress/Unzip.pm
+cp lib/IO/Uncompress/Adapter/Inflate.pm blib/lib/IO/Uncompress/Adapter/Inflate.pm
+cp lib/IO/Uncompress/Inflate.pm blib/lib/IO/Uncompress/Inflate.pm
+cp lib/IO/Compress/Deflate.pm blib/lib/IO/Compress/Deflate.pm
+cp lib/IO/Compress/Adapter/Deflate.pm blib/lib/IO/Compress/Adapter/Deflate.pm
+cp lib/IO/Uncompress/Gunzip.pm blib/lib/IO/Uncompress/Gunzip.pm
+cp lib/IO/Uncompress/Adapter/Identity.pm blib/lib/IO/Uncompress/Adapter/Identity.pm
+cp lib/IO/Compress/Zip.pm blib/lib/IO/Compress/Zip.pm
+cp lib/IO/Compress/RawDeflate.pm blib/lib/IO/Compress/RawDeflate.pm
+cp lib/IO/Compress/Gzip/Constants.pm blib/lib/IO/Compress/Gzip/Constants.pm
+cp lib/IO/Compress/Zlib/Extra.pm blib/lib/IO/Compress/Zlib/Extra.pm
+cp lib/IO/Uncompress/AnyInflate.pm blib/lib/IO/Uncompress/AnyInflate.pm
+cp lib/IO/Compress/Zip/Constants.pm blib/lib/IO/Compress/Zip/Constants.pm
+cp lib/IO/Compress/Gzip.pm blib/lib/IO/Compress/Gzip.pm
+cp lib/IO/Compress/Zlib/Constants.pm blib/lib/IO/Compress/Zlib/Constants.pm
+Manifying blib/man3/IO::Uncompress::RawInflate.3pm
+Manifying blib/man3/IO::Uncompress::Unzip.3pm
+Manifying blib/man3/IO::Uncompress::Inflate.3pm
+Manifying blib/man3/IO::Compress::Deflate.3pm
+Manifying blib/man3/IO::Compress::Zip.3pm
+Manifying blib/man3/IO::Uncompress::Gunzip.3pm
+Manifying blib/man3/IO::Compress::RawDeflate.3pm
+Manifying blib/man3/IO::Uncompress::AnyInflate.3pm
+Manifying blib/man3/IO::Compress::Gzip.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/000prereq.....................ok
+t/001zlib-generic-deflate.......ok
+t/001zlib-generic-gzip..........ok
+t/001zlib-generic-rawdeflate....ok
+t/001zlib-generic-zip...........ok
+t/002any-deflate................ok
+t/002any-gzip...................ok
+t/002any-rawdeflate.............ok
+t/002any-transparent............ok
+t/002any-zip....................ok
+t/004gziphdr....................ok
+t/005defhdr.....................ok
+t/006zip........................ok
+ 32/77 skipped: IO::Compress::Bzip2 not available
+t/010examples...................ok
+t/020isize......................skipped
+ all skipped: Lengthy Tests Disabled
+t/050interop-gzip...............ok
+t/100generic-deflate............ok
+t/100generic-gzip...............ok
+t/100generic-rawdeflate.........ok
+t/100generic-zip................ok
+t/101truncate-deflate...........ok
+t/101truncate-gzip..............ok
+t/101truncate-rawdeflate........ok
+t/101truncate-zip...............ok
+t/102tied-deflate...............ok
+t/102tied-gzip..................ok
+t/102tied-rawdeflate............ok
+t/102tied-zip...................ok
+t/103newtied-deflate............ok
+t/103newtied-gzip...............ok
+t/103newtied-rawdeflate.........ok
+t/103newtied-zip................ok
+t/104destroy-deflate............ok
+t/104destroy-gzip...............ok
+t/104destroy-rawdeflate.........ok
+t/104destroy-zip................ok
+t/105oneshot-deflate............ok
+ 2/970 skipped: readonly + threads
+t/105oneshot-gzip-only..........ok
+t/105oneshot-gzip...............ok
+ 2/970 skipped: readonly + threads
+t/105oneshot-rawdeflate.........ok
+ 2/970 skipped: readonly + threads
+t/105oneshot-zip-bzip2-only.....skipped
+ all skipped: IO::Compress::Bzip2 not available
+t/105oneshot-zip-only...........ok
+t/105oneshot-zip................ok
+ 2/970 skipped: readonly + threads
+t/106prime-deflate..............ok
+t/106prime-gzip.................ok
+t/106prime-rawdeflate...........ok
+t/106prime-zip..................ok
+t/107multi-deflate..............ok
+t/107multi-gzip.................ok
+t/107multi-rawdeflate...........ok
+t/107multi-zip..................ok
+t/108anyunc-deflate.............ok
+t/108anyunc-gzip................ok
+t/108anyunc-rawdeflate..........ok
+t/108anyunc-transparent.........ok
+t/108anyunc-zip.................ok
+t/109merge-deflate..............ok
+t/109merge-gzip.................ok
+t/109merge-rawdeflate...........ok
+t/109merge-zip..................skipped
+ all skipped: not implemented yet
+t/110encode-deflate.............ok
+t/110encode-gzip................ok
+t/110encode-rawdeflate..........ok
+t/110encode-zip.................ok
+t/999pod........................ok
+All tests successful, 3 tests and 40 subtests skipped.
+Files=65, Tests=38777, 445 wallclock secs (386.51 cusr + 3.95 csys = 390.46 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/RawInflate.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/AnyInflate.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/Gunzip.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/Unzip.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/Inflate.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/Adapter/Identity.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Uncompress/Adapter/Inflate.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Gzip.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Deflate.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Zip.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/RawDeflate.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Zip/Constants.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Adapter/Deflate.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Adapter/Identity.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Gzip/Constants.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Zlib/Constants.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/perl5/IO/Compress/Zlib/Extra.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Compress::RawDeflate.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Compress::Gzip.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Uncompress::AnyInflate.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Uncompress::Unzip.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Uncompress::Gunzip.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Uncompress::RawInflate.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Compress::Zip.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Uncompress::Inflate.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Compress::Deflate.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012'
+pod2man --section 3pm --name "IO::Compress::Zlib::FAQ" pod/FAQ.pod \
+ > /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/man/man3/IO::Compress::Zlib::FAQ.3pm
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/lib/perl5 ] || \
+ rmdir --ignore-fail-on-non-empty --parents --verbose \
+ /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/lib/perl5
+# lintian override for a long line with a URL.
+dh_installdirs /usr/share/lintian/overrides/
+install -m 644 /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/lintian-overrides /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-compress-zlib-perl/libio-compress-zlib-perl-2.012/debian/libio-compress-zlib-perl/usr/share/lintian/overrides/libio-compress-zlib-perl
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installexamples examples/*
+dh_installdocs
+dh_installchangelogs Changes
+dh_perl
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libio-compress-zlib-perl' in `../libio-compress-zlib-perl_2.012-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libio-compress-zlib-perl.
+(Reading database ... 34908 files and directories currently installed.)
+Unpacking libio-compress-zlib-perl (from libio-compress-zlib-perl_2.012-1_all.deb) ...
+Setting up libio-compress-zlib-perl (2.012-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-========================-==============-============================================
+ii libio-compress-zlib-perl 2.012-1 Perl interface to zlib
+libfile-which-perl
+dpkg-buildpackage: source package is libfile-which-perl
+dpkg-buildpackage: source version is 0.05-7
+dpkg-buildpackage: source changed by gregor herrmann <gregor+debian@comodo.priv.at>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 0.05-7
+dh_testdir
+dh_testroot
+[ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
+dh_clean
+rm -f build-stamp install-stamp
+dpkg-source: building libfile-which-perl using existing libfile-which-perl_0.05.orig.tar.gz
+dpkg-source: building libfile-which-perl in libfile-which-perl_0.05-7.diff.gz
+dpkg-source: building libfile-which-perl in libfile-which-perl_0.05-7.dsc
+dh_testdir
+perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+Writing Makefile for File::Which
+/scratchbox/tools/bin/make OPTIMIZE="-O2 -g -Wall"
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
+cp Which.pm blib/lib/File/Which.pm
+cp bin/pwhich blib/script/pwhich
+/targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/pwhich
+Manifying blib/man1/pwhich.1p
+Manifying blib/man3/File::Which.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/all.......ok
+t/load......ok
+t/simple....ok
+ 5/9 skipped:
+All tests successful, 5 subtests skipped.
+Files=3, Tests=13, 1 wallclock secs ( 0.84 cusr + 0.08 csys = 0.92 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+dh_installdirs
+/scratchbox/tools/bin/make install PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05/debian/tmp/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05/debian/tmp/usr/share/perl5/File/Which.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05/debian/tmp/usr/share/man/man1/pwhich.1p
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05/debian/tmp/usr/share/man/man3/File::Which.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05/debian/tmp/usr/bin/pwhich
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libfile-which-perl/libfile-which-perl-0.05'
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_install --sourcedir=debian/tmp \
+ -Xpwhich
+dh_installdocs
+dh_installexamples
+dh_installchangelogs Changes
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_perl
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libfile-which-perl' in `../libfile-which-perl_0.05-7_all.deb'.
+
+dpkg-buildpackage: binary and diff upload (original source NOT included)
+Selecting previously deselected package libfile-which-perl.
+(Reading database ... 34951 files and directories currently installed.)
+Unpacking libfile-which-perl (from libfile-which-perl_0.05-7_all.deb) ...
+Setting up libfile-which-perl (0.05-7) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-==================-==============-=======================================================
+ii libfile-which-perl 0.05-7 Perl module for searching paths for executable programs
+libarchive-zip-perl
+dpkg-buildpackage: source package is libarchive-zip-perl
+dpkg-buildpackage: source version is 1.18-1
+dpkg-buildpackage: source changed by Ben Burton <bab@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.18-1
+dh_testdir
+dh_testroot
+rm -f build-stamp configure-stamp
+rm -rf testdir extracted
+# Add here commands to clean up after the build process.
+/scratchbox/tools/bin/make clean
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
+rm -f Makefile.old
+dh_clean
+dpkg-source: building libarchive-zip-perl using existing libarchive-zip-perl_1.18.orig.tar.gz
+dpkg-source: building libarchive-zip-perl in libarchive-zip-perl_1.18-1.diff.gz
+dpkg-source: building libarchive-zip-perl in libarchive-zip-perl_1.18-1.dsc
+dh_testdir
+# Add here commands to configure the package.
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Warning: the following files are missing in your kit:
+ docs/appnote.iz
+ docs/Appnote.txt
+Please inform the author.
+Writing Makefile for Archive::Zip
+touch configure-stamp
+dh_testdir
+# Add here commands to compile the package.
+/usr/bin/perl Makefile.PL
+Writing Makefile for Archive::Zip
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
+cp lib/Archive/Zip/FileMember.pm blib/lib/Archive/Zip/FileMember.pm
+cp lib/Archive/Zip/MockFileHandle.pm blib/lib/Archive/Zip/MockFileHandle.pm
+cp lib/Archive/Zip/MemberRead.pm blib/lib/Archive/Zip/MemberRead.pm
+cp lib/Archive/Zip/BufferedFileHandle.pm blib/lib/Archive/Zip/BufferedFileHandle.pm
+cp lib/Archive/Zip/StringMember.pm blib/lib/Archive/Zip/StringMember.pm
+cp lib/Archive/Zip/Tree.pm blib/lib/Archive/Zip/Tree.pm
+cp lib/Archive/Zip/FAQ.pod blib/lib/Archive/Zip/FAQ.pod
+cp lib/Archive/Zip/Member.pm blib/lib/Archive/Zip/Member.pm
+cp lib/Archive/Zip/Archive.pm blib/lib/Archive/Zip/Archive.pm
+cp lib/Archive/Zip.pm blib/lib/Archive/Zip.pm
+cp lib/Archive/Zip/ZipFileMember.pm blib/lib/Archive/Zip/ZipFileMember.pm
+cp lib/Archive/Zip/NewFileMember.pm blib/lib/Archive/Zip/NewFileMember.pm
+cp lib/Archive/Zip/DirectoryMember.pm blib/lib/Archive/Zip/DirectoryMember.pm
+cp bin/crc32 blib/script/crc32
+/targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/crc32
+Manifying blib/man3/Archive::Zip::Tree.3pm
+Manifying blib/man3/Archive::Zip::FAQ.3pm
+Manifying blib/man3/Archive::Zip.3pm
+Manifying blib/man3/Archive::Zip::MemberRead.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
+# Make sure it all seems to be working okay.
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/01_compile.......ok
+t/02_main..........ok
+t/03_ex............ok
+t/04_readmember....ok
+t/05_tree..........ok
+t/06_update........ok
+t/99_author........skipped
+ all skipped: Author tests not required for installation
+All tests successful, 1 test skipped.
+Files=7, Tests=186, 30 wallclock secs (27.76 cusr + 1.54 csys = 29.30 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+dh_installdirs
+# Add here commands to install the package into debian/tmp
+/scratchbox/tools/bin/make install INSTALLDIRS=vendor PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/BufferedFileHandle.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/StringMember.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/FAQ.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/FileMember.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/ZipFileMember.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/Member.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/Tree.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/Archive.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/NewFileMember.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/MockFileHandle.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/DirectoryMember.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/perl5/Archive/Zip/MemberRead.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/man/man3/Archive::Zip::FAQ.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/man/man3/Archive::Zip.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/man/man3/Archive::Zip::MemberRead.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/share/man/man3/Archive::Zip::Tree.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/bin/crc32
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18'
+rm -rf /home/maemo/workspace/git/dh-make-perl/dev/arm/libarchive-zip-perl/libarchive-zip-perl-1.18/debian/libarchive-zip-perl/usr/lib
+dh_testdir
+dh_testroot
+dh_installdocs
+dh_installexamples
+dh_installman
+dh_installchangelogs Changes
+dh_link
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_perl
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libarchive-zip-perl' in `../libarchive-zip-perl_1.18-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libarchive-zip-perl.
+(Reading database ... 34960 files and directories currently installed.)
+Unpacking libarchive-zip-perl (from libarchive-zip-perl_1.18-1_all.deb) ...
+Setting up libarchive-zip-perl (1.18-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-===================-==============-============================================
+ii libarchive-zip-perl 1.18-1 Module for manipulation of ZIP archives
+libarray-compare-perl
+dpkg-buildpackage: source package is libarray-compare-perl
+dpkg-buildpackage: source version is 1.16-1
+dpkg-buildpackage: source changed by Gunnar Wolf <gwolf@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.16-1
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+[ ! -f Build ] || ./Build distclean
+libtree-dagnode-perl
+dpkg-buildpackage: source package is libtree-dagnode-perl
+dpkg-buildpackage: source version is 1.06-1
+dpkg-buildpackage: source changed by Roberto C. Sanchez <roberto@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.06-1
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+[ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
+dpkg-source: building libtree-dagnode-perl using existing libtree-dagnode-perl_1.06.orig.tar.gz
+dpkg-source: building libtree-dagnode-perl in libtree-dagnode-perl_1.06-1.diff.gz
+dpkg-source: building libtree-dagnode-perl in libtree-dagnode-perl_1.06-1.dsc
+dh_testdir
+perl Makefile.PL verbose INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+ ABSTRACT_FROM => q[lib/Tree/DAG_Node.pm]
+ AUTHOR => q[David Hand, <cogent@cpan.org>]
+ INSTALLDIRS => q[vendor]
+ LICENSE => q[perl]
+'LICENSE' is not a known MakeMaker parameter name.
+ NAME => q[Tree::DAG_Node]
+ PREREQ_PM => { strict=>q[0], vars=>q[0], Carp=>q[0] }
+ VERSION_FROM => q[lib/Tree/DAG_Node.pm]
+ dist => { COMPRESS=>q[gzip -6f], SUFFIX=>q[gz] }
+Using PERL=/targets/FREMANTLE_ARMEL/usr/bin/perl
+Writing Makefile for Tree::DAG_Node
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
+cp lib/Tree/DAG_Node.pm blib/lib/Tree/DAG_Node.pm
+Manifying blib/man3/Tree::DAG_Node.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/00_about_verbose....ok
+t/01_old_junk.........ok
+All tests successful.
+Files=2, Tests=3, 1 wallclock secs ( 0.70 cusr + 0.04 csys = 0.74 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06/debian/libtree-dagnode-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06/debian/libtree-dagnode-perl/usr/share/perl5/Tree/DAG_Node.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06/debian/libtree-dagnode-perl/usr/share/man/man3/Tree::DAG_Node.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06'
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06/debian/libtree-dagnode-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents --verbose /home/maemo/workspace/git/dh-make-perl/dev/arm/libtree-dagnode-perl/libtree-dagnode-perl-1.06/debian/libtree-dagnode-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installchangelogs ChangeLog
+dh_installdocs
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_perl
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libtree-dagnode-perl' in `../libtree-dagnode-perl_1.06-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libtree-dagnode-perl.
+(Reading database ... 35011 files and directories currently installed.)
+Unpacking libtree-dagnode-perl (from libtree-dagnode-perl_1.06-1_all.deb) ...
+Setting up libtree-dagnode-perl (1.06-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-====================-==============-==============================================================
+ii libtree-dagnode-perl 1.06-1 Tree::DAG_Node - (super)class for representing nodes in a tree
+libnet-ssleay-perl
+dpkg-buildpackage: source package is libnet-ssleay-perl
+dpkg-buildpackage: source version is 1.35-1
+dpkg-buildpackage: source changed by gregor herrmann <gregoa@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.35-1
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
+Removing patch 20no-stray-libz-link.patch
+Restoring inc/Module/Install/PRIVATE/Net/SSLeay.pm
+
+Removing patch 10fix_pod.patch
+Restoring lib/Net/SSLeay.pm
+
+No patches applied
+rm -rf .pc debian/stamp-patched
+dh clean
+ dh_testdir
+ dh_auto_clean
+ dh_clean
+dpkg-source: building libnet-ssleay-perl using existing libnet-ssleay-perl_1.35.orig.tar.gz
+dpkg-source: building libnet-ssleay-perl in libnet-ssleay-perl_1.35-1.diff.gz
+dpkg-source: building libnet-ssleay-perl in libnet-ssleay-perl_1.35-1.dsc
+# quilt exits with 2 as return when there was nothing to do.
+# That's not an error here (but it's usefull to break loops in crude scripts)
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
+Applying patch 10fix_pod.patch
+patching file lib/Net/SSLeay.pm
+
+Applying patch 20no-stray-libz-link.patch
+patching file inc/Module/Install/PRIVATE/Net/SSLeay.pm
+
+Now at patch 20no-stray-libz-link.patch
+touch debian/stamp-patched
+dh build
+ dh_testdir
+ dh_auto_configure
+*** Found OpenSSL-0.9.8c installed in /usr
+*** Be sure to use the same compiler and options to compile your OpenSSL, perl,
+ and Net::SSLeay. Mixing and matching compilers is not supported.
+Do you want to run external tests?
+These tests *will* *fail* if you do not have network connectivity. [n] n
+Checking if your kit is complete...
+Looks good
+'CREATE_PACKLIST' is not a known MakeMaker parameter name.
+Writing Makefile for Net::SSLeay
+ dh_auto_build
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
+cp lib/Net/SSLeay.pm blib/lib/Net/SSLeay.pm
+AutoSplitting blib/lib/Net/SSLeay.pm (blib/lib/auto/Net/SSLeay)
+blib/lib/Net/SSLeay.pm: some names are not unique when truncated to 8 characters:
+ directory blib/lib/auto/Net/SSLeay:
+ do_https3.al, do_https2.al, do_https4.al, do_https.al truncate to do_https
+ do_httpx3.al, do_httpx2.al, do_httpx4.al truncate to do_httpx
+ get_https.al, get_https3.al, get_https4.al, get_http.al, get_http3.al, get_http4.al, get_httpx.al, get_httpx3.al, get_httpx4.al truncate to get_http
+ head_https.al, head_https3.al, head_https4.al, head_http.al, head_http3.al, head_http4.al, head_httpx.al, head_httpx3.al, head_httpx4.al truncate to head_htt
+ post_https.al, post_https3.al, post_https4.al, post_http.al, post_http3.al, post_http4.al, post_httpx.al, post_httpx3.al, post_httpx4.al truncate to post_htt
+ put_https.al, put_https3.al, put_https4.al, put_http.al, put_http3.al, put_http4.al, put_httpx.al, put_httpx3.al, put_httpx4.al truncate to put_http
+ ssl_read_all.al, ssl_read_until.al, ssl_read_CRLF.al truncate to ssl_read
+ ssl_write_all.al, ssl_write_CRLF.al truncate to ssl_writ
+ tcp_read_all.al, tcp_read_until.al, tcp_read_CRLF.al truncate to tcp_read
+ tcp_write_all.al, tcp_write_CRLF.al truncate to tcp_writ
+cp lib/Net/SSLeay/Handle.pm blib/lib/Net/SSLeay/Handle.pm
+/targets/FREMANTLE_ARMEL/usr/bin/perl "-Iinc" /usr/share/perl5/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap SSLeay.xs > SSLeay.xsc && mv SSLeay.xsc SSLeay.c
+cc -c -I/usr/include -I/usr/inc32 -I/usr/kerberos/include -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"1.35\" -DXS_VERSION=\"1.35\" -fPIC "-I/usr/lib/perl/5.8/CORE" SSLeay.c
+Running Mkbootstrap for Net::SSLeay ()
+chmod 644 SSLeay.bs
+rm -f blib/arch/auto/Net/SSLeay/SSLeay.so
+LD_RUN_PATH="" cc -shared -L/usr/local/lib SSLeay.o -o blib/arch/auto/Net/SSLeay/SSLeay.so -L/usr -L/usr/lib -lssl -lcrypto
+chmod 755 blib/arch/auto/Net/SSLeay/SSLeay.so
+cp SSLeay.bs blib/arch/auto/Net/SSLeay/SSLeay.bs
+chmod 644 blib/arch/auto/Net/SSLeay/SSLeay.bs
+Manifying blib/man3/Net::SSLeay.3pm
+Manifying blib/man3/Net::SSLeay::Handle.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
+ dh_auto_test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/local/*.t t/handle/local/*.t
+t/handle/local/05_use..........ok
+t/local/00_ptr_cast............ok
+t/local/01_pod.................ok
+t/local/02_pod_coverage........skipped
+ all skipped: currently disabled
+t/local/03_use.................ok
+t/local/04_basic...............ok
+ 3/4 skipped: Neet Test::Exception for the some tests
+t/local/05_passwd_cb...........ok
+t/local/06_tcpecho.............ok
+t/local/07_sslecho.............ok
+t/local/08_pipe................ok
+t/local/15_bio.................ok
+t/local/20_autoload............skipped
+ all skipped: Some tests need Test::Exception
+t/local/30_error...............skipped
+ all skipped: Requires Test::Exception, Test::Warn and Test::NoWarnings
+t/local/31_rsa_generate_key....skipped
+ all skipped: Test::Exception required
+t/local/35_ephemeral...........ok
+t/local/50_digest..............ok
+t/local/kwalitee...............skipped
+ all skipped: Needs Test::Kwalitee
+All tests successful, 5 tests and 3 subtests skipped.
+Files=17, Tests=144, 18 wallclock secs (17.41 cusr + 0.83 csys = 18.24 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
+touch build-stamp
+dh install
+ dh_testroot
+ dh_prep
+ dh_installdirs
+ dh_auto_install
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/SSLeay.so
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/SSLeay.bs
+Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_httpx4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/make_form.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/make_headers.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_http4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_https4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_https.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_https4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/ssl_read_until.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcp_write_CRLF.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/autosplit.ix
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_http3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_httpx3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_httpx2.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_http4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcp_read_CRLF.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_httpx4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_httpx.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/https_cat.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_httpx4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/debug_read.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcp_read_until.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_http.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcp_read_all.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcpcat.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_http.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_https3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcpxcat.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/want_write.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/randomize.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_https3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_httpx3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/set_proxy.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_https.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_https3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_httpx4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_https2.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_http.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_httpx4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_httpx3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/dump_peer_certificate.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/open_tcp_connection.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_http3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_https.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/ssl_write_all.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_https4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_httpx.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_httpx3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_https.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_https.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/ssl_read_CRLF.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/set_server_cert_and_key.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_http3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/ssl_write_CRLF.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_http3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_https3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/new_x_ctx.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_http.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/head_https3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/set_cert_and_key.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/ssl_read_all.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/httpx_cat.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/want_read.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/get_httpx.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_http4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/http_cat.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_http4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/tcp_write_all.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_httpx.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/open_proxy_tcp_connection.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/put_https4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/want_nothing.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/want_X509_lookup.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/post_httpx3.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/sslcat.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/auto/Net/SSLeay/do_https4.al
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/Net/SSLeay.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/lib/perl5/Net/SSLeay/Handle.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/share/man/man3/Net::SSLeay.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35/debian/libnet-ssleay-perl/usr/share/man/man3/Net::SSLeay::Handle.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libnet-ssleay-perl/libnet-ssleay-perl-1.35'
+ dh_install
+ dh_installdocs
+ dh_installchangelogs
+ dh_installexamples
+ dh_installman
+ dh_installcatalogs
+ dh_installcron
+ dh_installdebconf
+ dh_installemacsen
+ dh_installifupdown
+ dh_installinfo
+ dh_installinit
+ dh_installmenu
+ dh_installmime
+ dh_installmodules
+ dh_installlogcheck
+ dh_installlogrotate
+ dh_installpam
+ dh_installppp
+ dh_installudev
+ dh_installwm
+ dh_installxfonts
+ dh_bugfiles
+ dh_lintian
+ dh_gconf
+ dh_icons
+ dh_perl
+ dh_usrlocal
+ dh_link
+ dh_compress
+ dh_fixperms
+touch install-stamp
+dh binary-arch
+ dh_strip -a
+ dh_makeshlibs -a
+ dh_shlibdeps -a
+ dh_installdeb -a
+ dh_gencontrol -a
+ dh_md5sums -a
+ dh_builddeb -a
+dpkg-deb: building package `libnet-ssleay-perl' in `../libnet-ssleay-perl_1.35-1_armel.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libnet-ssleay-perl.
+(Reading database ... 35018 files and directories currently installed.)
+Unpacking libnet-ssleay-perl (from libnet-ssleay-perl_1.35-1_armel.deb) ...
+Setting up libnet-ssleay-perl (1.35-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-==================-==============-============================================
+ii libnet-ssleay-perl 1.35-1 Perl module for Secure Sockets Layer (SSL)
+libio-socket-ssl-perl
+dpkg-buildpackage: source package is libio-socket-ssl-perl
+dpkg-buildpackage: source version is 1.16-1+lenny1
+dpkg-buildpackage: source changed by Dominic Hargreaves <dom@earth.li>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.16-1+lenny1
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
+Removing patch partial_hostname_fix.patch
+Restoring SSL.pm
+Restoring t/verify_hostname.t
+
+Removing patch disable_timebomb_tests.patch
+Restoring t/auto_verify_hostname.t
+Restoring t/sessions.t
+Restoring t/compatibility.t
+Restoring t/core.t
+Restoring t/verify_hostname.t
+
+No patches applied
+rm -rf .pc debian/stamp-patched
+dh clean
+ dh_testdir
+ dh_auto_clean
+ dh_clean
+dpkg-source: building libio-socket-ssl-perl in libio-socket-ssl-perl_1.16-1+lenny1.tar.gz
+dpkg-source: building libio-socket-ssl-perl in libio-socket-ssl-perl_1.16-1+lenny1.dsc
+# quilt exits with 2 as return when there was nothing to do.
+# That's not an error here (but it's usefull to break loops in crude scripts)
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
+Applying patch disable_timebomb_tests.patch
+patching file t/auto_verify_hostname.t
+patching file t/compatibility.t
+patching file t/core.t
+patching file t/sessions.t
+patching file t/verify_hostname.t
+
+Applying patch partial_hostname_fix.patch
+patching file SSL.pm
+patching file t/verify_hostname.t
+Hunk #1 succeeded at 91 (offset 3 lines).
+
+Now at patch partial_hostname_fix.patch
+touch debian/stamp-patched
+dh build
+ dh_testdir
+ dh_auto_configure
+Checking if your kit is complete...
+Looks good
+'CREATE_PACKLIST' is not a known MakeMaker parameter name.
+Writing Makefile for IO::Socket::SSL
+ dh_auto_build
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
+cp SSL.pm blib/lib/IO/Socket/SSL.pm
+Manifying blib/man3/IO::Socket::SSL.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
+ dh_auto_test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/01loadmodule............ok
+t/02settings..............ok
+t/acceptSSL-timeout.......ok
+t/auto_verify_hostname....skipped
+ all skipped: test cert has expired
+t/cert_no_file............ok
+t/compatibility...........skipped
+ all skipped: test cert has expired
+t/connectSSL-timeout......ok
+t/core....................skipped
+ all skipped: test cert has expired
+t/dhe.....................ok
+t/nonblock................ok
+t/readline................ok
+t/sessions................skipped
+ all skipped: test cert has expired
+t/start-stopssl...........ok
+t/startssl................ok
+t/sysread_write...........ok
+t/verify_hostname.........skipped
+ all skipped: test cert has expired
+All tests successful, 5 tests skipped.
+Files=16, Tests=123, 54 wallclock secs (23.44 cusr + 1.02 csys = 24.46 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
+touch build-stamp
+dh install
+ dh_testroot
+ dh_prep
+ dh_installdirs
+ dh_auto_install
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16/debian/libio-socket-ssl-perl/usr/share/perl5/IO/Socket/SSL.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16/debian/libio-socket-ssl-perl/usr/share/man/man3/IO::Socket::SSL.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libio-socket-ssl-perl/libio-socket-ssl-perl-1.16'
+ dh_install
+ dh_installdocs
+ dh_installchangelogs
+ dh_installexamples
+ dh_installman
+ dh_installcatalogs
+ dh_installcron
+ dh_installdebconf
+ dh_installemacsen
+ dh_installifupdown
+ dh_installinfo
+ dh_installinit
+ dh_installmenu
+ dh_installmime
+ dh_installmodules
+ dh_installlogcheck
+ dh_installlogrotate
+ dh_installpam
+ dh_installppp
+ dh_installudev
+ dh_installwm
+ dh_installxfonts
+ dh_bugfiles
+ dh_lintian
+ dh_gconf
+ dh_icons
+ dh_perl
+ dh_usrlocal
+ dh_link
+ dh_compress
+ dh_fixperms
+touch install-stamp
+dh binary-indep
+ dh_installdeb -i
+ dh_gencontrol -i
+ dh_md5sums -i
+ dh_builddeb -i
+dpkg-deb: building package `libio-socket-ssl-perl' in `../libio-socket-ssl-perl_1.16-1+lenny1_all.deb'.
+
+dpkg-buildpackage: full upload; Debian-native package (full source is included)
+Selecting previously deselected package libio-socket-ssl-perl.
+(Reading database ... 35135 files and directories currently installed.)
+Unpacking libio-socket-ssl-perl (from libio-socket-ssl-perl_1.16-1+lenny1_all.deb) ...
+Setting up libio-socket-ssl-perl (1.16-1+lenny1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-=====================-==============-=================================================================
+ii libio-socket-ssl-perl 1.16-1+lenny1 Perl module implementing object oriented interface to SSL sockets
+liburi-perl
+dpkg-buildpackage: source package is liburi-perl
+dpkg-buildpackage: source version is 1.35.dfsg.1-1
+dpkg-buildpackage: source changed by Stefan Hornburg (Racke) <racke@linuxia.de>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.35.dfsg.1-1
+dh_testdir
+dh_testroot
+rm -f build-stamp install-stamp
+# Add here commands to clean up after the build process.
+/scratchbox/tools/bin/make clean
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
+rm Makefile Makefile.old
+rm -rf debian/liburi-perl
+dh_clean
+dpkg-source: building liburi-perl using existing liburi-perl_1.35.dfsg.1.orig.tar.gz
+dpkg-source: building liburi-perl in liburi-perl_1.35.dfsg.1-1.diff.gz
+dpkg-source: building liburi-perl in liburi-perl_1.35.dfsg.1-1.dsc
+dh_testdir
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Warning: the following files are missing in your kit:
+ rfc2396.txt
+Please inform the author.
+Writing Makefile for URI
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
+cp URI/_ldap.pm blib/lib/URI/_ldap.pm
+cp URI/ftp.pm blib/lib/URI/ftp.pm
+cp URI/_segment.pm blib/lib/URI/_segment.pm
+cp URI/file/OS2.pm blib/lib/URI/file/OS2.pm
+cp URI/_generic.pm blib/lib/URI/_generic.pm
+cp URI/file/QNX.pm blib/lib/URI/file/QNX.pm
+cp URI/nntp.pm blib/lib/URI/nntp.pm
+cp URI/tn3270.pm blib/lib/URI/tn3270.pm
+cp URI/QueryParam.pm blib/lib/URI/QueryParam.pm
+cp URI/sips.pm blib/lib/URI/sips.pm
+cp URI/gopher.pm blib/lib/URI/gopher.pm
+cp URI/urn/oid.pm blib/lib/URI/urn/oid.pm
+cp URI/WithBase.pm blib/lib/URI/WithBase.pm
+cp URI.pm blib/lib/URI.pm
+cp URI/file/Base.pm blib/lib/URI/file/Base.pm
+cp URI/ldapi.pm blib/lib/URI/ldapi.pm
+cp URI/mailto.pm blib/lib/URI/mailto.pm
+cp URI/file/Unix.pm blib/lib/URI/file/Unix.pm
+cp URI/data.pm blib/lib/URI/data.pm
+cp URI/_userpass.pm blib/lib/URI/_userpass.pm
+cp URI/urn.pm blib/lib/URI/urn.pm
+cp URI/ldap.pm blib/lib/URI/ldap.pm
+cp URI/telnet.pm blib/lib/URI/telnet.pm
+cp URI/mms.pm blib/lib/URI/mms.pm
+cp URI/_foreign.pm blib/lib/URI/_foreign.pm
+cp URI/_server.pm blib/lib/URI/_server.pm
+cp URI/Heuristic.pm blib/lib/URI/Heuristic.pm
+cp URI/URL.pm blib/lib/URI/URL.pm
+cp URI/_query.pm blib/lib/URI/_query.pm
+cp URI/rtsp.pm blib/lib/URI/rtsp.pm
+cp URI/file.pm blib/lib/URI/file.pm
+cp URI/Split.pm blib/lib/URI/Split.pm
+cp URI/rlogin.pm blib/lib/URI/rlogin.pm
+cp URI/news.pm blib/lib/URI/news.pm
+cp URI/urn/isbn.pm blib/lib/URI/urn/isbn.pm
+cp URI/http.pm blib/lib/URI/http.pm
+cp URI/ssh.pm blib/lib/URI/ssh.pm
+cp URI/rsync.pm blib/lib/URI/rsync.pm
+cp URI/https.pm blib/lib/URI/https.pm
+cp URI/file/Win32.pm blib/lib/URI/file/Win32.pm
+cp URI/ldaps.pm blib/lib/URI/ldaps.pm
+cp URI/snews.pm blib/lib/URI/snews.pm
+cp URI/pop.pm blib/lib/URI/pop.pm
+cp URI/rtspu.pm blib/lib/URI/rtspu.pm
+cp URI/Escape.pm blib/lib/URI/Escape.pm
+cp URI/file/FAT.pm blib/lib/URI/file/FAT.pm
+cp URI/sip.pm blib/lib/URI/sip.pm
+cp URI/_login.pm blib/lib/URI/_login.pm
+cp URI/file/Mac.pm blib/lib/URI/file/Mac.pm
+Manifying blib/man3/URI::WithBase.3pm
+Manifying blib/man3/URI::URL.3pm
+Manifying blib/man3/URI.3pm
+Manifying blib/man3/URI::file.3pm
+Manifying blib/man3/URI::Split.3pm
+Manifying blib/man3/URI::data.3pm
+Manifying blib/man3/URI::ldap.3pm
+Manifying blib/man3/URI::Escape.3pm
+Manifying blib/man3/URI::QueryParam.3pm
+Manifying blib/man3/URI::Heuristic.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+dh_installdirs
+/scratchbox/tools/bin/make install PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr; \
+ touch install-stamp
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/mailto.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/mms.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_server.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_login.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/rsync.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_query.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/sips.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/data.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/Split.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/pop.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/urn.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/nntp.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/ldapi.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_segment.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/ftp.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_foreign.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/rlogin.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/snews.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/http.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/QueryParam.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/WithBase.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/tn3270.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_ldap.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/rtspu.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/gopher.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_userpass.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/ldap.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/telnet.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/URL.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/https.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/rtsp.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/ssh.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/Heuristic.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/_generic.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/Escape.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/news.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/sip.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/ldaps.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/Unix.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/QNX.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/Win32.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/OS2.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/Mac.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/Base.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/file/FAT.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/urn/oid.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/perl5/URI/urn/isbn.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::ldap.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::QueryParam.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::file.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::URL.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::Split.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::data.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::WithBase.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::Heuristic.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1/debian/liburi-perl/usr/share/man/man3/URI::Escape.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/liburi-perl/liburi-perl-1.35.dfsg.1'
+dh_testdir
+dh_testroot
+dh_installdocs README
+dh_perl
+dh_installexamples
+dh_installmenu
+dh_installcron
+dh_installman
+dh_installchangelogs Changes
+dh_link
+dh_strip
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `liburi-perl' in `../liburi-perl_1.35.dfsg.1-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package liburi-perl.
+(Reading database ... 35149 files and directories currently installed.)
+Unpacking liburi-perl (from liburi-perl_1.35.dfsg.1-1_all.deb) ...
+Setting up liburi-perl (1.35.dfsg.1-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-==============-==============-============================================
+ii liburi-perl 1.35.dfsg.1-1 Manipulates and accesses URI strings
+libhtml-tagset-perl
+dpkg-buildpackage: source package is libhtml-tagset-perl
+dpkg-buildpackage: source version is 3.20-2
+dpkg-buildpackage: source changed by gregor herrmann <gregor+debian@comodo.priv.at>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 3.20-2
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
+Removing patch isbodyelement.patch
+Restoring Tagset.pm
+
+No patches applied
+rm -rf .pc debian/stamp-patched
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+[ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
+dpkg-source: building libhtml-tagset-perl using existing libhtml-tagset-perl_3.20.orig.tar.gz
+dpkg-source: building libhtml-tagset-perl in libhtml-tagset-perl_3.20-2.diff.gz
+dpkg-source: building libhtml-tagset-perl in libhtml-tagset-perl_3.20-2.dsc
+# quilt exits with 2 as return when there was nothing to do.
+# That's not an error here (but it's usefull to break loops in crude scripts)
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
+Applying patch isbodyelement.patch
+patching file Tagset.pm
+
+Now at patch isbodyelement.patch
+touch debian/stamp-patched
+dh_testdir
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+Writing Makefile for HTML::Tagset
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
+cp Tagset.pm blib/lib/HTML/Tagset.pm
+Manifying blib/man3/HTML::Tagset.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/00_about_verbose....ok
+t/01_old_junk.........ok
+t/pod.................ok
+All tests successful.
+Files=3, Tests=4, 1 wallclock secs ( 1.64 cusr + 0.10 csys = 1.74 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20/debian/libhtml-tagset-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20/debian/libhtml-tagset-perl/usr/share/perl5/HTML/Tagset.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20/debian/libhtml-tagset-perl/usr/share/man/man3/HTML::Tagset.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20'
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20/debian/libhtml-tagset-perl/usr/lib/perl5 ] || \
+ rmdir --ignore-fail-on-non-empty --parents --verbose \
+ /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tagset-perl/libhtml-tagset-perl-3.20/debian/libhtml-tagset-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installdocs
+dh_installchangelogs Changes
+dh_perl
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libhtml-tagset-perl' in `../libhtml-tagset-perl_3.20-2_all.deb'.
+
+dpkg-buildpackage: binary and diff upload (original source NOT included)
+Selecting previously deselected package libhtml-tagset-perl.
+(Reading database ... 35217 files and directories currently installed.)
+Unpacking libhtml-tagset-perl (from libhtml-tagset-perl_3.20-2_all.deb) ...
+Setting up libhtml-tagset-perl (3.20-2) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-===================-==============-============================================
+ii libhtml-tagset-perl 3.20-2 Data tables pertaining to HTML
+libhtml-parser-perl
+dpkg-buildpackage: source package is libhtml-parser-perl
+dpkg-buildpackage: source version is 3.56-1+lenny1
+dpkg-buildpackage: source changed by Salvatore Bonaccorso <salvatore.bonaccorso@gmail.com>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 3.56-1+lenny1
+dh_testdir
+dh_testroot
+if [ -e Makefile ]; then /scratchbox/tools/bin/make -i distclean; fi
+rm -f build-stamp configure-stamp
+dh_clean
+dpkg-source: building libhtml-parser-perl using existing libhtml-parser-perl_3.56.orig.tar.gz
+dpkg-source: building libhtml-parser-perl in libhtml-parser-perl_3.56-1+lenny1.diff.gz
+dpkg-source: building libhtml-parser-perl in libhtml-parser-perl_3.56-1+lenny1.dsc
+dh_testdir
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+Writing Makefile for HTML::Parser
+touch configure-stamp
+dh_testdir
+/scratchbox/tools/bin/make OPTIMIZE="-O2 -g -Wall"
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
+cp lib/HTML/PullParser.pm blib/lib/HTML/PullParser.pm
+cp Parser.pm blib/lib/HTML/Parser.pm
+cp lib/HTML/Entities.pm blib/lib/HTML/Entities.pm
+cp lib/HTML/LinkExtor.pm blib/lib/HTML/LinkExtor.pm
+cp lib/HTML/TokeParser.pm blib/lib/HTML/TokeParser.pm
+cp lib/HTML/HeadParser.pm blib/lib/HTML/HeadParser.pm
+cp lib/HTML/Filter.pm blib/lib/HTML/Filter.pm
+/targets/FREMANTLE_ARMEL/usr/bin/perl /usr/share/perl5/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap Parser.xs > Parser.xsc && mv Parser.xsc Parser.c
+/targets/FREMANTLE_ARMEL/usr/bin/perl mkhctype >hctype.h
+/targets/FREMANTLE_ARMEL/usr/bin/perl mkpfunc >pfunc.h
+cc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -Wall -DVERSION=\"3.56\" -DXS_VERSION=\"3.56\" -fPIC "-I/usr/lib/perl/5.8/CORE" -DMARKED_SECTION Parser.c
+Running Mkbootstrap for HTML::Parser ()
+chmod 644 Parser.bs
+rm -f blib/arch/auto/HTML/Parser/Parser.so
+LD_RUN_PATH="" cc -shared -L/usr/local/lib Parser.o -o blib/arch/auto/HTML/Parser/Parser.so
+chmod 755 blib/arch/auto/HTML/Parser/Parser.so
+cp Parser.bs blib/arch/auto/HTML/Parser/Parser.bs
+chmod 644 blib/arch/auto/HTML/Parser/Parser.bs
+Manifying blib/man3/HTML::PullParser.3pm
+Manifying blib/man3/HTML::Entities.3pm
+Manifying blib/man3/HTML::Parser.3pm
+Manifying blib/man3/HTML::TokeParser.3pm
+Manifying blib/man3/HTML::LinkExtor.3pm
+Manifying blib/man3/HTML::Filter.3pm
+Manifying blib/man3/HTML::HeadParser.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/api_version........ok
+t/argspec-bad........ok
+t/argspec............ok
+t/argspec2...........ok
+t/attr-encoded.......ok
+t/callback...........ok
+t/case-sensitive.....ok
+t/cases..............ok
+t/comment............ok
+t/crashme............ok
+t/declaration........ok
+t/default............ok
+t/document...........ok
+t/dtext..............ok
+t/entities...........ok
+t/entities2..........ok
+t/filter-methods.....ok
+t/filter.............ok
+t/handler-eof........ok
+t/handler............ok
+t/headparser-http....ok
+ 1/1 skipped: Can't locate HTTP/Headers.pm in @INC (@INC contains: /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/blib/lib /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/blib/arch /etc/perl /usr/local/lib/perl/5.8.3 /usr/local/share/perl/5.8.3 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl . /etc/perl /usr/local/lib/perl/5.8.3 /usr/local/share/perl/5.8.3 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/blib/lib/HTML/HeadParser.pm line 99.
+t/headparser.........ok
+t/ignore.............ok
+t/largetags..........ok
+t/linkextor-base.....ok
+t/linkextor-rel......ok
+t/magic..............ok
+t/marked-sect........ok
+t/msie-compat........ok
+t/offset.............ok
+t/options............ok
+t/parsefile..........ok
+t/parser.............ok
+t/plaintext..........ok
+t/pod................ok
+t/process............ok
+t/pullparser.........ok
+t/script.............ok
+t/skipped-text.......ok
+t/stack-realloc......ok
+t/textarea...........ok
+t/threads............ok
+t/tokeparser.........ok
+t/uentities..........ok
+t/unbroken-text......ok
+t/unicode-bom........ok
+t/unicode............ok
+t/xml-mode...........ok
+All tests successful, 1 subtest skipped.
+Files=48, Tests=438, 52 wallclock secs (47.47 cusr + 1.28 csys = 48.75 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_installdirs
+/scratchbox/tools/bin/make install INSTALLDIRS=vendor PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/auto/HTML/Parser/Parser.so
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/auto/HTML/Parser/Parser.bs
+Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/LinkExtor.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/HeadParser.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/PullParser.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/TokeParser.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/Parser.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/Entities.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/lib/perl5/HTML/Filter.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::Entities.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::Parser.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::Filter.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::LinkExtor.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::TokeParser.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::PullParser.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56/debian/libhtml-parser-perl/usr/share/man/man3/HTML::HeadParser.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-parser-perl/libhtml-parser-perl-3.56'
+rm -rf debian/libhtml-parser-perl/usr/share/perl5
+dh_testdir
+dh_testroot
+dh_installdocs TODO
+chmod a+x eg/hform
+dh_installexamples eg/hanchors eg/hform eg/hrefsub eg/hstrip eg/htext eg/htextsub eg/htitle
+dh_installchangelogs Changes
+dh_strip
+dh_fixperms
+dh_compress
+dh_installdeb
+dh_perl
+dh_shlibdeps
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libhtml-parser-perl' in `../libhtml-parser-perl_3.56-1+lenny1_armel.deb'.
+
+dpkg-buildpackage: binary and diff upload (original source NOT included)
+Selecting previously deselected package libhtml-parser-perl.
+(Reading database ... 35224 files and directories currently installed.)
+Unpacking libhtml-parser-perl (from libhtml-parser-perl_3.56-1+lenny1_armel.deb) ...
+Setting up libhtml-parser-perl (3.56-1+lenny1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-===================-==============-======================================================
+ii libhtml-parser-perl 3.56-1+lenny1 A collection of modules that parse HTML text documents
+libhtml-tree-perl
+dpkg-buildpackage: source package is libhtml-tree-perl
+dpkg-buildpackage: source version is 3.23-1
+dpkg-buildpackage: source changed by Krzysztof Krzyzaniak (eloy) <eloy@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 3.23-1
+dh_testdir
+dh_testroot
+if [ -e Makefile ]; then /scratchbox/tools/bin/make -i distclean; fi
+rm -f build-stamp configure-stamp
+dh_clean
+dpkg-source: building libhtml-tree-perl using existing libhtml-tree-perl_3.23.orig.tar.gz
+dpkg-source: building libhtml-tree-perl in libhtml-tree-perl_3.23-1.diff.gz
+dpkg-source: building libhtml-tree-perl in libhtml-tree-perl_3.23-1.dsc
+dh_testdir
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+Checking if your kit is complete...
+Looks good
+Writing Makefile for HTML-Tree
+touch configure-stamp
+dh_testdir
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
+cp lib/HTML/Element/traverse.pm blib/lib/HTML/Element/traverse.pm
+cp lib/HTML/Tree/AboutTrees.pod blib/lib/HTML/Tree/AboutTrees.pod
+cp lib/HTML/AsSubs.pm blib/lib/HTML/AsSubs.pm
+cp lib/HTML/Tree/AboutObjects.pod blib/lib/HTML/Tree/AboutObjects.pod
+cp lib/HTML/TreeBuilder.pm blib/lib/HTML/TreeBuilder.pm
+cp lib/HTML/Tree/Scanning.pod blib/lib/HTML/Tree/Scanning.pod
+cp lib/HTML/Element.pm blib/lib/HTML/Element.pm
+cp lib/HTML/Tree.pm blib/lib/HTML/Tree.pm
+cp lib/HTML/Parse.pm blib/lib/HTML/Parse.pm
+Manifying blib/man3/HTML::Tree::AboutTrees.3pm
+Manifying blib/man3/HTML::Element::traverse.3pm
+Manifying blib/man3/HTML::AsSubs.3pm
+Manifying blib/man3/HTML::Tree::AboutObjects.3pm
+Manifying blib/man3/HTML::TreeBuilder.3pm
+Manifying blib/man3/HTML::Tree::Scanning.3pm
+Manifying blib/man3/HTML::Element.3pm
+Manifying blib/man3/HTML::Tree.3pm
+Manifying blib/man3/HTML::Parse.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/00system..........ok
+t/assubs............ok
+t/attributes........ok
+t/body..............ok
+t/building..........ok
+t/children..........ok
+t/clonei............ok
+t/construct_tree....ok
+t/doctype...........ok
+t/escape............ok
+t/oldparse..........ok
+t/parse.............ok
+t/parsefile.........ok
+t/pod...............ok
+t/split.............ok
+t/tag-rendering.....ok
+t/unicode...........ok
+All tests successful.
+Files=17, Tests=755, 30 wallclock secs (27.59 cusr + 0.65 csys = 28.24 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_installdirs
+/scratchbox/tools/bin/make install INSTALLDIRS=vendor PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/TreeBuilder.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/AsSubs.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Parse.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Element.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Tree.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Element/traverse.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Tree/AboutObjects.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Tree/Scanning.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/perl5/HTML/Tree/AboutTrees.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Element.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Tree::AboutObjects.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Tree.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Tree::Scanning.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Parse.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Tree::AboutTrees.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::AsSubs.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::Element::traverse.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23/debian/libhtml-tree-perl/usr/share/man/man3/HTML::TreeBuilder.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libhtml-tree-perl/libhtml-tree-perl-3.23'
+rm -rf debian/libhtml-tree-perl/usr/lib
+dh_testdir
+dh_testroot
+dh_installdocs README TODO
+dh_installexamples htmltree
+dh_installchangelogs Changes
+dh_fixperms
+dh_compress
+dh_installdeb
+dh_perl
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libhtml-tree-perl' in `../libhtml-tree-perl_3.23-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libhtml-tree-perl.
+(Reading database ... 35256 files and directories currently installed.)
+Unpacking libhtml-tree-perl (from libhtml-tree-perl_3.23-1_all.deb) ...
+Setting up libhtml-tree-perl (3.23-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-=================-==============-============================================
+ii libhtml-tree-perl 3.23-1 represent and create HTML syntax trees
+libwww-perl
+dpkg-buildpackage: source package is libwww-perl
+dpkg-buildpackage: source version is 5.813-1
+dpkg-buildpackage: source changed by gregor herrmann <gregoa@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 5.813-1
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+[ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
+dpkg-source: building libwww-perl using existing libwww-perl_5.813.orig.tar.gz
+dpkg-source: building libwww-perl in libwww-perl_5.813-1.diff.gz
+dpkg-source: building libwww-perl in libwww-perl_5.813-1.dsc
+dh_testdir
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor
+
+This package comes with some sample programs that I can try
+to install in /usr/bin.
+
+ Note that you can avoid these questions by passing
+ the '-n' option to 'Makefile.PL'.
+
+Do you want to install lwp-request? [y] y
+Do you want to install lwp-mirror? [y] y
+Do you want to install lwp-rget? [y] y
+Do you want to install lwp-download? [y] y
+
+The lwp-request program will use the name it is invoked with to
+determine what HTTP method to use. I can set up alias for the most
+common HTTP methods. These alias are also installed in
+/usr/bin.
+
+Do you want to install the GET alias? [n] n
+Do you want to install the HEAD alias? [n] n
+Do you want to install the POST alias? [n] n
+
+Checking for URI........... ok
+Checking for HTML::Parser.. ok
+Checking for MIME::Base64.. ok
+Checking for Net::FTP...... ok
+Checking for Digest::MD5 .. ok
+
+Checking if your kit is complete...
+Looks good
+Writing Makefile for LWP
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
+cp lib/LWP/RobotUA.pm blib/lib/LWP/RobotUA.pm
+cp lib/LWP/Authen/Ntlm.pm blib/lib/LWP/Authen/Ntlm.pm
+cp lib/LWP.pm blib/lib/LWP.pm
+cp lib/HTTP/Headers/ETag.pm blib/lib/HTTP/Headers/ETag.pm
+cp lib/LWP/Protocol.pm blib/lib/LWP/Protocol.pm
+cp lwptut.pod blib/lib/lwptut.pod
+cp lib/HTTP/Request/Common.pm blib/lib/HTTP/Request/Common.pm
+cp lib/HTTP/Message.pm blib/lib/HTTP/Message.pm
+cp lib/LWP/Protocol/ftp.pm blib/lib/LWP/Protocol/ftp.pm
+cp lib/HTML/Form.pm blib/lib/HTML/Form.pm
+cp lib/HTTP/Cookies/Netscape.pm blib/lib/HTTP/Cookies/Netscape.pm
+cp lib/LWP/Authen/Digest.pm blib/lib/LWP/Authen/Digest.pm
+cp lib/LWP/Protocol/gopher.pm blib/lib/LWP/Protocol/gopher.pm
+cp lib/Net/HTTP/NB.pm blib/lib/Net/HTTP/NB.pm
+cp lib/HTTP/Status.pm blib/lib/HTTP/Status.pm
+cp lib/LWP/Protocol/cpan.pm blib/lib/LWP/Protocol/cpan.pm
+cp lib/Net/HTTPS.pm blib/lib/Net/HTTPS.pm
+cp lib/HTTP/Headers/Util.pm blib/lib/HTTP/Headers/Util.pm
+cp lib/LWP/Authen/Basic.pm blib/lib/LWP/Authen/Basic.pm
+cp lib/HTTP/Cookies/Microsoft.pm blib/lib/HTTP/Cookies/Microsoft.pm
+cp lib/LWP/UserAgent.pm blib/lib/LWP/UserAgent.pm
+cp lib/LWP/Protocol/nntp.pm blib/lib/LWP/Protocol/nntp.pm
+cp lib/LWP/Protocol/loopback.pm blib/lib/LWP/Protocol/loopback.pm
+cp lib/LWP/Protocol/mailto.pm blib/lib/LWP/Protocol/mailto.pm
+cp lib/LWP/Protocol/http.pm blib/lib/LWP/Protocol/http.pm
+cp lib/LWP/Protocol/https10.pm blib/lib/LWP/Protocol/https10.pm
+cp lib/LWP/MemberMixin.pm blib/lib/LWP/MemberMixin.pm
+cp lib/HTTP/Headers/Auth.pm blib/lib/HTTP/Headers/Auth.pm
+cp lib/LWP/Debug.pm blib/lib/LWP/Debug.pm
+cp lib/Net/HTTP.pm blib/lib/Net/HTTP.pm
+cp lib/LWP/media.types blib/lib/LWP/media.types
+cp lib/HTTP/Daemon.pm blib/lib/HTTP/Daemon.pm
+cp lib/HTTP/Cookies.pm blib/lib/HTTP/Cookies.pm
+cp lib/LWP/ConnCache.pm blib/lib/LWP/ConnCache.pm
+cp lib/File/Listing.pm blib/lib/File/Listing.pm
+cp lib/WWW/RobotRules/AnyDBM_File.pm blib/lib/WWW/RobotRules/AnyDBM_File.pm
+cp lib/LWP/MediaTypes.pm blib/lib/LWP/MediaTypes.pm
+cp lwpcook.pod blib/lib/lwpcook.pod
+cp lib/HTTP/Date.pm blib/lib/HTTP/Date.pm
+cp lib/LWP/Protocol/http10.pm blib/lib/LWP/Protocol/http10.pm
+cp lib/LWP/Protocol/file.pm blib/lib/LWP/Protocol/file.pm
+cp lib/LWP/Protocol/GHTTP.pm blib/lib/LWP/Protocol/GHTTP.pm
+cp lib/LWP/DebugFile.pm blib/lib/LWP/DebugFile.pm
+cp lib/HTTP/Request.pm blib/lib/HTTP/Request.pm
+cp lib/HTTP/Negotiate.pm blib/lib/HTTP/Negotiate.pm
+cp lib/WWW/RobotRules.pm blib/lib/WWW/RobotRules.pm
+cp lib/LWP/Protocol/data.pm blib/lib/LWP/Protocol/data.pm
+cp lib/LWP/Protocol/nogo.pm blib/lib/LWP/Protocol/nogo.pm
+cp lib/HTTP/Response.pm blib/lib/HTTP/Response.pm
+cp lib/LWP/Simple.pm blib/lib/LWP/Simple.pm
+cp lib/HTTP/Headers.pm blib/lib/HTTP/Headers.pm
+cp lib/LWP/Protocol/https.pm blib/lib/LWP/Protocol/https.pm
+cp lib/Bundle/LWP.pm blib/lib/Bundle/LWP.pm
+cp lib/Net/HTTP/Methods.pm blib/lib/Net/HTTP/Methods.pm
+cp bin/lwp-mirror blib/script/lwp-mirror
+/targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/lwp-mirror
+cp bin/lwp-download blib/script/lwp-download
+/targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/lwp-download
+cp bin/lwp-rget blib/script/lwp-rget
+/targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/lwp-rget
+cp bin/lwp-request blib/script/lwp-request
+/targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/lwp-request
+Manifying blib/man1/lwp-mirror.1p
+Manifying blib/man1/lwp-download.1p
+Manifying blib/man1/lwp-rget.1p
+Manifying blib/man1/lwp-request.1p
+Manifying blib/man3/LWP::RobotUA.3pm
+Manifying blib/man3/LWP::Authen::Ntlm.3pm
+Manifying blib/man3/LWP.3pm
+Manifying blib/man3/LWP::Protocol.3pm
+Manifying blib/man3/HTTP::Request::Common.3pm
+Manifying blib/man3/lwptut.3pm
+Manifying blib/man3/HTTP::Message.3pm
+Manifying blib/man3/HTML::Form.3pm
+Manifying blib/man3/HTTP::Cookies::Netscape.3pm
+Manifying blib/man3/Net::HTTP::NB.3pm
+Manifying blib/man3/HTTP::Status.3pm
+Manifying blib/man3/HTTP::Headers::Util.3pm
+Manifying blib/man3/HTTP::Cookies::Microsoft.3pm
+Manifying blib/man3/LWP::UserAgent.3pm
+Manifying blib/man3/LWP::MemberMixin.3pm
+Manifying blib/man3/LWP::Debug.3pm
+Manifying blib/man3/Net::HTTP.3pm
+Manifying blib/man3/HTTP::Daemon.3pm
+Manifying blib/man3/HTTP::Cookies.3pm
+Manifying blib/man3/LWP::ConnCache.3pm
+Manifying blib/man3/File::Listing.3pm
+Manifying blib/man3/WWW::RobotRules::AnyDBM_File.3pm
+Manifying blib/man3/lwpcook.3pm
+Manifying blib/man3/LWP::MediaTypes.3pm
+Manifying blib/man3/HTTP::Date.3pm
+Manifying blib/man3/WWW::RobotRules.3pm
+Manifying blib/man3/HTTP::Negotiate.3pm
+Manifying blib/man3/HTTP::Request.3pm
+Manifying blib/man3/LWP::DebugFile.3pm
+Manifying blib/man3/HTTP::Response.3pm
+Manifying blib/man3/HTTP::Headers.3pm
+Manifying blib/man3/LWP::Simple.3pm
+Manifying blib/man3/Bundle::LWP.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
+# Turn off the live checks
+if [ -f t/live/ENABLED ]; then rm t/live/ENABLED; fi
+if [ -f t/live/ZLIB_OK ]; then rm t/live/ZLIB_OK; fi
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
+/targets/FREMANTLE_ARMEL/usr/bin/perl t/TEST 0
+base/common-req...........ok
+base/cookies..............ok
+base/date.................ok
+base/headers-auth.........ok
+base/headers-etag.........ok
+base/headers-util.........ok
+base/headers..............ok
+base/http.................ok
+base/listing..............ok
+base/mediatypes...........ok
+base/message-old..........ok
+base/message-parts........ok
+base/message..............ok
+base/negotiate............ok
+base/protocols............ok
+base/response.............ok
+base/status...............ok
+base/ua...................ok
+html/form-maxlength.......ok
+html/form-multi-select....ok
+html/form-param...........ok
+html/form.................ok
+robot/rules-dbm...........ok
+robot/rules...............ok
+robot/ua-get..............ok
+robot/ua..................ok
+local/autoload-get........ok
+local/autoload............ok
+local/chunked.............ok
+local/get.................ok
+local/http-get............ok
+local/http................ok
+local/protosub............ok
+All tests successful.
+Files=33, Tests=835, 58 wallclock secs (34.60 cusr + 1.52 csys = 36.12 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/lwptut.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/lwpcook.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/File/Listing.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Headers.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Status.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Date.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Response.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Message.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Daemon.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Request.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Negotiate.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Cookies.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Cookies/Netscape.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Cookies/Microsoft.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Headers/ETag.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Headers/Auth.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Headers/Util.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTTP/Request/Common.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/HTML/Form.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/Bundle/LWP.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Simple.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/DebugFile.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/MediaTypes.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/MemberMixin.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/UserAgent.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/media.types
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/RobotUA.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Debug.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/ConnCache.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Authen/Basic.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Authen/Ntlm.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Authen/Digest.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/mailto.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/cpan.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/data.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/nntp.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/ftp.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/http.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/http10.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/gopher.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/file.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/loopback.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/https10.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/https.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/GHTTP.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/LWP/Protocol/nogo.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/Net/HTTPS.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/Net/HTTP.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/Net/HTTP/NB.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/Net/HTTP/Methods.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/WWW/RobotRules.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/perl5/WWW/RobotRules/AnyDBM_File.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man1/lwp-request.1p
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man1/lwp-download.1p
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man1/lwp-rget.1p
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man1/lwp-mirror.1p
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Request.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Headers.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/lwptut.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::Authen::Ntlm.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTML::Form.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::Debug.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::RobotUA.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::ConnCache.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Request::Common.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::MediaTypes.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::UserAgent.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/File::Listing.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::Simple.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::Protocol.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/WWW::RobotRules.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/WWW::RobotRules::AnyDBM_File.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Message.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/Net::HTTP.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Date.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Daemon.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Response.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Negotiate.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/Net::HTTP::NB.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Cookies::Microsoft.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Headers::Util.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Cookies::Netscape.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Status.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::DebugFile.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/Bundle::LWP.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/LWP::MemberMixin.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/HTTP::Cookies.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/share/man/man3/lwpcook.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/bin/lwp-rget
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/bin/lwp-request
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/bin/lwp-mirror
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/bin/lwp-download
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813'
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/lib/perl5 ] || \
+ rmdir --ignore-fail-on-non-empty --parents --verbose \
+ /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-perl/libwww-perl-5.813/debian/libwww-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installdocs README README.SSL
+dh_installchangelogs Changes
+dh_link
+dh_perl
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libwww-perl' in `../libwww-perl_5.813-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libwww-perl.
+(Reading database ... 35284 files and directories currently installed.)
+Unpacking libwww-perl (from libwww-perl_5.813-1_all.deb) ...
+Setting up libwww-perl (5.813-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-==============-==============-============================================
+ii libwww-perl 5.813-1 WWW client/server library for Perl (aka LWP)
+libwww-mechanize-perl
+dpkg-buildpackage: source package is libwww-mechanize-perl
+dpkg-buildpackage: source version is 1.34-2
+dpkg-buildpackage: source changed by Rene Mayorga <rmayorga@debian.org.sv>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.34-2
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null pop -a -R || test $? = 2
+Removing patch adding_pod_see_also.patch
+Restoring lib/WWW/Mechanize/Image.pm
+Restoring lib/WWW/Mechanize/Cookbook.pod
+Restoring lib/WWW/Mechanize/Link.pm
+Restoring bin/mech-dump
+
+Removing patch no_internet.patch
+Restoring t/live/computers4sure.t
+Restoring t/live/wikipedia.t
+
+No patches applied
+rm -rf .pc debian/stamp-patched
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+[ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
+dh_clean
+dpkg-source: building libwww-mechanize-perl using existing libwww-mechanize-perl_1.34.orig.tar.gz
+dpkg-source: building libwww-mechanize-perl in libwww-mechanize-perl_1.34-2.diff.gz
+dpkg-source: building libwww-mechanize-perl in libwww-mechanize-perl_1.34-2.dsc
+# quilt exits with 2 as return when there was nothing to do.
+# That's not an error here (but it's usefull to break loops in crude scripts)
+QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null push -a || test $? = 2
+Applying patch no_internet.patch
+patching file t/live/computers4sure.t
+patching file t/live/wikipedia.t
+
+Applying patch adding_pod_see_also.patch
+patching file bin/mech-dump
+patching file lib/WWW/Mechanize/Cookbook.pod
+patching file lib/WWW/Mechanize/Image.pm
+patching file lib/WWW/Mechanize/Link.pm
+
+Now at patch adding_pod_see_also.patch
+touch debian/stamp-patched
+dh_testdir
+# Add here commands to compile the package.
+/usr/bin/perl Makefile.PL verbose INSTALLDIRS=vendor --local --mech-dump
+mech-dump is always installed now. This option is deprecated.
+
+WWW::Mechanize likes to have a lot of test modules for some of its tests.
+The following are modules that would be nice to have, but not required.
+
+ Test::Memory::Cycle
+ Test::Warn
+ Test::Taint
+
+
+Checking if your kit is complete...
+Looks good
+ ABSTRACT_FROM => q[lib/WWW/Mechanize.pm]
+ AUTHOR => q[Andy Lester <andy@petdance.com>]
+ EXE_FILES => [q[bin/mech-dump]]
+ INSTALLDIRS => q[vendor]
+ NAME => q[WWW::Mechanize]
+ PREREQ_PM => { HTML::Form=>q[1.038], Getopt::Long=>q[0], URI=>q[1.25], Pod::Usage=>q[0], FindBin=>q[0], HTML::HeadParser=>q[0], HTTP::Status=>q[0], Carp=>q[0], Test::More=>q[0.34], LWP::UserAgent=>q[2.024], HTML::TokeParser=>q[2.28], URI::file=>q[0], File::Temp=>q[0], HTML::Parser=>q[3.33], URI::URL=>q[0], HTTP::Daemon=>q[0], HTTP::Request=>q[1.3], LWP=>q[5.802] }
+ VERSION_FROM => q[lib/WWW/Mechanize.pm]
+ clean => { FILES=>q[WWW-Mechanize-*] }
+ test => { TESTS=>q[t/00-load.t t/add_header.t t/aliases.t t/area_link.t t/autocheck.t t/clone.t t/die.t t/field.t t/find_frame.t t/find_image.t t/find_inputs.t t/find_link-warnings.t t/find_link.t t/find_link_id.t t/form-parsing.t t/frames.t t/image-new.t t/image-parse.t t/link-base.t t/link-relative.t t/link.t t/new.t t/pod-coverage.t t/pod.t t/regex-error.t t/save_content.t t/select.t t/taint.t t/tick.t t/upload.t t/warn.t t/warnings.t t/local/back.t t/local/click.t t/local/click_button.t t/local/failure.t t/local/follow.t t/local/form.t t/local/get.t t/local/overload.t t/local/page_stack.t t/local/referer.t t/local/reload.t t/local/submit.t t/live/computers4sure.t t/live/wikipedia.t t/mech-dump/mech-dump.t] }
+Using PERL=/targets/FREMANTLE_ARMEL/usr/bin/perl
+Writing Makefile for WWW::Mechanize
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
+cp lib/WWW/Mechanize/Examples.pod blib/lib/WWW/Mechanize/Examples.pod
+cp lib/WWW/Mechanize/Link.pm blib/lib/WWW/Mechanize/Link.pm
+cp lib/WWW/Mechanize/Image.pm blib/lib/WWW/Mechanize/Image.pm
+cp lib/WWW/Mechanize/FAQ.pod blib/lib/WWW/Mechanize/FAQ.pod
+cp lib/WWW/Mechanize/Cookbook.pod blib/lib/WWW/Mechanize/Cookbook.pod
+cp lib/WWW/Mechanize.pm blib/lib/WWW/Mechanize.pm
+cp bin/mech-dump blib/script/mech-dump
+/targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/mech-dump
+Manifying blib/man1/mech-dump.1p
+Manifying blib/man3/WWW::Mechanize::Link.3pm
+Manifying blib/man3/WWW::Mechanize::Examples.3pm
+Manifying blib/man3/WWW::Mechanize::Image.3pm
+Manifying blib/man3/WWW::Mechanize::Cookbook.3pm
+Manifying blib/man3/WWW::Mechanize::FAQ.3pm
+Manifying blib/man3/WWW::Mechanize.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
+NOINTERNET=1 /scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/00-load.t t/add_header.t t/aliases.t t/area_link.t t/autocheck.t t/clone.t t/die.t t/field.t t/find_frame.t t/find_image.t t/find_inputs.t t/find_link-warnings.t t/find_link.t t/find_link_id.t t/form-parsing.t t/frames.t t/image-new.t t/image-parse.t t/link-base.t t/link-relative.t t/link.t t/new.t t/pod-coverage.t t/pod.t t/regex-error.t t/save_content.t t/select.t t/taint.t t/tick.t t/upload.t t/warn.t t/warnings.t t/local/back.t t/local/click.t t/local/click_button.t t/local/failure.t t/local/follow.t t/local/form.t t/local/get.t t/local/overload.t t/local/page_stack.t t/local/referer.t t/local/reload.t t/local/submit.t t/live/computers4sure.t t/live/wikipedia.t t/mech-dump/mech-dump.t
+t/00-load................ok
+t/add_header.............ok
+t/aliases................ok
+t/area_link..............ok
+ 4/9 skipped: Test::Memory::Cycle not installed
+t/autocheck..............skipped
+ all skipped: Test::Exception required to test autocheck
+t/clone..................ok
+t/die....................skipped
+ all skipped: Test::Exception required to test die
+t/field..................ok
+t/find_frame.............ok
+t/find_image.............ok
+t/find_inputs............ok
+t/find_link-warnings.....skipped
+ all skipped: Test::Warn required to test t/find_link-warnings.t
+t/find_link..............ok
+t/find_link_id...........ok
+t/form-parsing...........ok
+t/frames.................ok
+t/image-new..............ok
+t/image-parse............ok
+t/link-base..............ok
+t/link-relative..........ok
+t/link...................ok
+t/live/computers4sure....skipped
+ all skipped: We don't have internet here
+t/live/wikipedia.........skipped
+ all skipped: We don't have internet here
+t/local/back.............ok
+ 2/38 skipped: Test::Memory::Cycle not installed
+t/local/click............ok
+t/local/click_button.....ok
+t/local/failure..........ok
+t/local/follow...........ok
+t/local/form.............ok
+t/local/get..............ok
+ 1/32 skipped: Test::Memory::Cycle not installed
+t/local/overload.........skipped
+ all skipped: Mysteriously stopped passing, and I don't know why.
+t/local/page_stack.......ok
+t/local/referer..........ok
+ 1/13 skipped: Test::Memory::Cycle not installed
+t/local/reload...........ok
+ 1/14 skipped: Test::Memory::Cycle not installed
+t/local/submit...........ok
+ 1/13 skipped: Test::Memory::Cycle not installed
+t/mech-dump/mech-dump....ok
+t/new....................ok
+t/pod-coverage...........ok
+t/pod....................ok
+t/regex-error............skipped
+ all skipped: Test::Warn required to test t/regex-error.t
+t/save_content...........ok
+t/select.................ok
+t/taint..................skipped
+ all skipped: Test::Taint required for checking taintedness
+t/tick...................ok
+t/upload.................ok
+t/warn...................skipped
+ all skipped: Test::Warn required to test warn
+t/warnings...............skipped
+ all skipped: Test::Warn required to test warnings
+All tests successful, 10 tests and 10 subtests skipped.
+Files=47, Tests=463, 119 wallclock secs (99.10 cusr + 2.94 csys = 102.04 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+/scratchbox/tools/bin/make install PREFIX=/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize/FAQ.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize/Image.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize/Examples.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize/Cookbook.pod
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/perl5/WWW/Mechanize/Link.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man1/mech-dump.1p
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize::Cookbook.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize::FAQ.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize::Image.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize::Link.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/man/man3/WWW::Mechanize::Examples.3pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/bin/mech-dump
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34'
+install -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/libwww-mechanize-perl
+install -m 644 /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/etc/* /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/share/libwww-mechanize-perl
+[ ! -d /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/lib/perl5 ] || rmdir --ignore-fail-on-non-empty --parents --verbose /home/maemo/workspace/git/dh-make-perl/dev/arm/libwww-mechanize-perl/libwww-mechanize-perl-1.34/debian/libwww-mechanize-perl/usr/lib/perl5
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installdocs
+dh_installchangelogs Changes
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_perl
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libwww-mechanize-perl' in `../libwww-mechanize-perl_1.34-2_all.deb'.
+
+dpkg-buildpackage: binary and diff upload (original source NOT included)
+Selecting previously deselected package libwww-mechanize-perl.
+(Reading database ... 35403 files and directories currently installed.)
+Unpacking libwww-mechanize-perl (from libwww-mechanize-perl_1.34-2_all.deb) ...
+Setting up libwww-mechanize-perl (1.34-2) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-=====================-==============-============================================
+ii libwww-mechanize-perl 1.34-2 Automate interaction with websites
+libemail-date-format-perl
+dpkg-buildpackage: source package is libemail-date-format-perl
+dpkg-buildpackage: source version is 1.002-1
+dpkg-buildpackage: source changed by Gunnar Wolf <gwolf@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 1.002-1
+dh_testdir
+dh_testroot
+dh_clean build-stamp install-stamp
+# Add commands to clean up after the build process here
+[ ! -f Makefile ] || /scratchbox/tools/bin/make realclean
+dpkg-source: building libemail-date-format-perl using existing libemail-date-format-perl_1.002.orig.tar.gz
+dpkg-source: building libemail-date-format-perl in libemail-date-format-perl_1.002-1.diff.gz
+dpkg-source: building libemail-date-format-perl in libemail-date-format-perl_1.002-1.dsc
+dh_testdir
+# As this is a architecture independent package, we are not
+# supposed to install stuff to /usr/lib. MakeMaker creates
+# the dirs, we prevent this by setting the INSTALLVENDORARCH
+# and VENDORARCHEXP environment variables.
+# Add commands to compile the package here
+/usr/bin/perl Makefile.PL INSTALLDIRS=vendor \
+ INSTALLVENDORARCH=/usr/share/perl5/ \
+ VENDORARCHEXP=/usr/share/perl5/
+Checking if your kit is complete...
+Looks good
+Writing Makefile for Email::Date::Format
+/scratchbox/tools/bin/make
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
+cp lib/Email/Date/Format.pm blib/lib/Email/Date/Format.pm
+Manifying blib/man3/Email::Date::Format.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
+/scratchbox/tools/bin/make test
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
+PERL_DL_NONLAZY=1 /targets/FREMANTLE_ARMEL/usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
+t/basic...........ok
+ 1/3 skipped: test only useful in US/Eastern, -0400, not +0100
+t/pod-coverage....ok
+t/pod.............ok
+All tests successful, 1 subtest skipped.
+Files=3, Tests=5, 3 wallclock secs ( 2.86 cusr + 0.09 csys = 2.95 CPU)
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+# Add commands to install the package into debian/ACKAGE_NAME here
+/scratchbox/tools/bin/make install DESTDIR=/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002/debian/libemail-date-format-perl PREFIX=/usr
+make[1]: Entering directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002/debian/libemail-date-format-perl/usr/share/perl5/Email/Date/Format.pm
+Installing /home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002/debian/libemail-date-format-perl/usr/share/man/man3/Email::Date::Format.3pm
+make[1]: Leaving directory `/home/maemo/workspace/git/dh-make-perl/dev/arm/libemail-date-format-perl/libemail-date-format-perl-1.002'
+touch install-stamp
+dh_testdir
+dh_testroot
+dh_installexamples
+dh_installdocs README
+dh_installchangelogs Changes
+dh_perl
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `libemail-date-format-perl' in `../libemail-date-format-perl_1.002-1_all.deb'.
+
+dpkg-buildpackage: full upload (original source is included)
+Selecting previously deselected package libemail-date-format-perl.
+(Reading database ... 35424 files and directories currently installed.)
+Unpacking libemail-date-format-perl (from libemail-date-format-perl_1.002-1_all.deb) ...
+Setting up libemail-date-format-perl (1.002-1) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-=========================-==============-==============================================
+ii libemail-date-format-perl 1.002-1 Module to generate RFC-2822-valid date strings
+dh-make-perl
+dpkg-buildpackage: source package is dh-make-perl
+dpkg-buildpackage: source version is 0.47
+dpkg-buildpackage: source changed by Damyan Ivanov <dmn@debian.org>
+dpkg-buildpackage: host architecture armel
+dpkg-buildpackage: source version without epoch 0.47
+dh_testdir
+dh_testroot
+rm -f build-stamp
+# Add here commands to clean up after the build process.
+dh_clean dh-make-perl.1
+dpkg-source: building dh-make-perl in dh-make-perl_0.47.tar.gz
+dpkg-source: building dh-make-perl in dh-make-perl_0.47.dsc
+dh_testdir
+# Add here commands to compile the package.
+pod2man --center debian dh-make-perl > dh-make-perl.1
+touch build-stamp
+dh_testdir
+dh_testroot
+dh_clean -k
+dh_installdirs
+# Add here commands to install the package into debian/tmp.
+#/scratchbox/tools/bin/make install DESTDIR=`pwd`/debian/tmp
+mkdir -p /home/maemo/workspace/git/dh-make-perl/dev/arm/dh-make-perl/dh-make-perl-0.47/debian/dh-make-perl/usr/bin
+mkdir -p /home/maemo/workspace/git/dh-make-perl/dev/arm/dh-make-perl/dh-make-perl-0.47/debian/dh-make-perl/usr/share/dh-make-perl
+cp dh-make-perl /home/maemo/workspace/git/dh-make-perl/dev/arm/dh-make-perl/dh-make-perl-0.47/debian/dh-make-perl/usr/bin
+cp rules* /home/maemo/workspace/git/dh-make-perl/dev/arm/dh-make-perl/dh-make-perl-0.47/debian/dh-make-perl/usr/share/dh-make-perl
+cp overrides /home/maemo/workspace/git/dh-make-perl/dev/arm/dh-make-perl/dh-make-perl-0.47/debian/dh-make-perl/usr/share/dh-make-perl
+dh_testdir
+dh_testroot
+dh_installdocs README
+dh_installman dh-make-perl.1
+dh_installchangelogs
+dh_compress
+dh_fixperms
+dh_installdeb
+dh_perl
+dh_gencontrol
+dh_md5sums
+dh_builddeb
+dpkg-deb: building package `dh-make-perl' in `../dh-make-perl_0.47_all.deb'.
+
+dpkg-buildpackage: full upload; Debian-native package (full source is included)
+Selecting previously deselected package dh-make-perl.
+(Reading database ... 35433 files and directories currently installed.)
+Unpacking dh-make-perl (from dh-make-perl_0.47_all.deb) ...
+Setting up dh-make-perl (0.47) ...
+Desired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
+|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+||/ Name Version Description
++++-==============-==============-============================================
+ii dh-make-perl 0.47 Create Debian packages from perl modules
projects / dh-make-perl / blobdiff